Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Median Price
$67.840
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$55.170
1k+ parts
-
10k+ parts
DigiKey
$74.000
$57.599
Verical
$44.786
Digiode
$44.669
Nova Conductors
$47.025
Vyrian
Chip Stock
Aztec Data Supply Inc.
$6.704
Parana Technologies
$8.501
$7.906
IDEA Electronic Components Group
$9.141
$8.684
AZTECH Wire
$13.970
$13.420
$13.150
$12.890
DigiPath Technology Company
$14.260
$13.690
Semicontronic
$38.070
$37.118
$36.928
Ampacity Inc.
Corphita
$42.318
Corohmni
$45.690
Continental Prestige Electronics
$46.085
Bastille Electronics
$47.030
$44.678
$41.857
Argo Parts USA
Robosynatics
Lucentia Tech
Formix International (Excess)
Other Function Telecom Interface ICs HMC566LP4E attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Hittite Microwave
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
HMC566LP4E Telecommunications trade compliance attributes, and parameters.
ECCN
3A001.B.2.D
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
Rugao Dachang Electronic
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RS9116N-DB00-CC0-B00
Silicon Labs
TELECOM CIRCUIT;
MFRC63002HN,151
NXP Semiconductors
NXP Semiconductors' MFRC63002HN,151 is a telecom IC with 32 terminals in a square chip carrier package. Operating b/w -25 to 85°C, it has a nominal voltage of 5V and terminal pitch of 0.5mm. Ideal for telecom circuits, this IC is surface mountable and features a max seated height of 1mm.
BQ51013BRHLT
BQ51013BRHLT by Texas Instruments is a Telecom IC with 20 terminals, operating b/w -40 to 125°C. It has a supply voltage of 5V and data rate of 0.002 Mbps, suitable for automotive applications due to its nickel/palladium/gold terminal finish. The chip carrier package style with very thin profile makes it ideal for surface mount designs.
SX1502I087TRT
Semtech
Semtech's SX1502I087TRT is a telecom IC with 20 terminals in a square chip carrier package. Operating from -40 to 85°C, it has a nominal voltage of 3.3V and matte tin terminal finish. Ideal for telecom circuits, this IC is surface mountable and features an industrial temperature grade.
AP22804AW5-7
Diodes Incorporated
Diodes Inc.'s AP22804AW5-7 is a telecom IC with 5 terminals, operating from -40 to 85°C. Its small outline package is ideal for telecom circuits, featuring matte tin finish and gull wing terminals. With a nominal 5V supply voltage, it's suitable for industrial applications requiring compact design and high temperature tolerance.
SAM-M8Q
U-blox Ag
TRF37B73IDSGT
TRF37B73IDSGT by Texas Instruments is an 8-terminal telecom IC with a package style of small outline, heat sink/slug, and very thin profile. It operates b/w -40 to 85°C, with a nominal voltage of 3.3V. Ideal for telecom circuits due to its nickel palladium gold terminal finish and industrial temperature grade suitability.
BG95M3LA-64-SGNS
Quectel Wireless Solutions
BG95M3LA-64-SGNS by Quectel Wireless Solutions is a telecom IC with 1.119 Mbps data rate, operating at -35 to 75 °C. It has 102 terminals, measures 19.9mm in width, and is suitable for commercial extended temperature grade applications.
BM20SPKS1NBC-0001AA
BM20SPKS1NBC-0001AA by Microchip Technology is a Telecom IC with 40 terminals, operating at -20 to 70°C. It has a supply voltage of 3.7V and terminal pitch of 1.2mm. Ideal for telecom applications due to its compact rectangular package style and surface mount capability.
HTSH5601ETK,118
NXP Semiconductors' HTSH5601ETK,118 is a telecom IC with 2 terminals in a small outline package. It operates b/w -25°C to 85°C and can withstand peak reflow temperature of 260°C for 30s. Ideal for telecom circuit applications due to its surface mount capability and dual terminal position.
SA612AN,112
SA612AN,112 by NXP Semiconductors is an 8-terminal telecom interface IC with a rectangular package style. It operates b/w -40 to 85°C and has a nominal voltage of 6V. Ideal for industrial applications requiring reliable telecom circuitry in compact designs.
ESP-WROOM-02
Espressif Systems (Shanghai)
ESP-WROOM-02 by Espressif Systems is a telecom IC with 18 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and peak reflow temp of 250°C. Ideal for industrial applications requiring compact MICROELECTRONIC ASSEMBLY with TELECOM CIRCUIT functionality.
NEO-6M-0-001
CL4490-1000-232
Laird Technologies
RF AND BASEBAND CIRCUIT;
RN41XVC-I/RM
Microchip Technology's RN41XVC-I/RM is a telecom IC with 20 terminals, operating from -40 to 85°C. It has a nominal voltage of 3.3V and is designed for industrial applications. The package style is rectangular with dimensions of 24.4mm x 29.9mm, making it suitable for various telecom interface functions.
PN7160A1EV/C100K
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
AX5243-1-TA05
AX5243-1-TA05 by Onsemi is a telecom IC with CMOS technology, operating b/w -40 to 85°C. It features 20 terminals in a square chip carrier package style, suitable for telecom circuit applications. With a nominal voltage of 3V and terminal pitch of 0.5mm, it offers high performance in industrial temperature grades.
XWL1837MODGIMOC
XWL1837MODGIMOC by Texas Instruments is a telecom IC with 100 terminals in a grid array package. It operates b/w -40°C to 85°C, with a supply voltage of 3.7V. Ideal for telecom circuit applications due to its compact rectangular shape and surface-mount compatibility.
FUSB340TMX
FUSB340TMX by Onsemi is a Telecom Interface IC with 18 terminals in a rectangular chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. With a nominal voltage of 3.6V, it is designed for telecom circuit applications.
TLV320AIC3104IRHBT
TLV320AIC3104IRHBT by Texas Instruments is a telecom interface IC with 2 channels and a nominal voltage of 1.8V. It has a package style of chip carrier, heat sink/slug, very thin profile and can operate in industrial temperature range (-40 to 85°C). This IC is commonly used in telecom circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HMC566LP4E
HMC566LP4ETR
Hittite Microwave
HMC560LM3
TELECOM CIRCUIT; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HQCCN; Package Shape: SQUARE;
Analog Devices' HMC560LM3 is a telecom IC with 6 terminals in a square chip carrier package. Operating temp range: -55 to 85°C, peak reflow temp: 250°C. Ideal for telecom interface applications due to its compact size and gold over nickel terminal finish.
HMC555
TELECOM CIRCUIT; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: DIE; Package Shape: RECTANGULAR;
HMC556
HMC570LC5
TELECOM CIRCUIT; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HQCCN; Package Shape: SQUARE;
HMC554
TELECOM CIRCUIT; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 3; Package Code: DIE; Package Shape: RECTANGULAR;
HMC560
HMC570LC5TR
HMC554LC3B
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVQCCN; Package Shape: SQUARE;
HMC560LM3TR
HMC570
TELECOM CIRCUIT; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 7; Package Code: DIE; Package Shape: RECTANGULAR;
HMC552LP4E
HMC551LP4E
HMC551LP4
HMC552LP4
HMC554LC3BTR
HMC551LP4ETR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved