Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NPN; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 170 MHz; Maximum Collector Current (IC): .5 A; Transistor Application: SWITCHING;
Median Price
$0.078
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$1.532
100+ parts
$1.394
1k+ parts
$1.256
10k+ parts
-
Element14
$0.105
$0.069
$0.068
Farnell
$0.092
$0.060
Arrow
$0.037
Verical
DigiKey
$0.063
Nova Conductors
$0.073
TME
$0.290
$0.102
$0.072
$0.055
Vyrian
Chip Stock
IBS Electronics
$0.099
NAC Semi
VRG Components
Kruse Electronics AG
Kruse
Bristol Electronics
VNN
Velocity Electronics
Beltway Electronics Company
ComSIT Distribution GmbH
NexGen Digital
Semicontronic
$0.014
Ampacity Inc.
Argo Parts USA
$0.071
Netroflash
Modulus Dynamics
Corohmni
Continental Prestige Electronics
$0.245
$0.107
$0.049
$0.031
Aztec Data Supply Inc.
$0.561
Advanced Electronics
Glotronic Ltd.
RC Electronics
$0.070
Perfect Parts
Eastek
Futuretech Components
Lixinc
Authorized Procurement Solutions
Kepictronics
Assy Fe
Small Signal Bipolar Junction Transistors (BJT) BCV47TA attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Zetex Plc
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
Maximum VCEsat:
BCV47TA Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Mult Dev Material/Site Chg 29/Mar/2018
PCN Assembly/Origin - Plating Site Add 24/Feb/2017
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Sangdest Microelectronics (Nanjing)
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
BC847C
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .1 A;
BC846BDW1T1G
BC846BDW1T1G by Onsemi is a NPN BJT with 2 elements, ideal for amplifier applications. It has a max collector-emitter voltage of 65V, DC current gain of 200, and operates up to 150°C. This small outline transistor in gull wing package offers high performance in compact designs.
2N3906
Weitron Technology
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .2 A; Package Style (Meter): CYLINDRICAL;
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BC846B
General Semiconductor
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .1 A;
ULN2003ADRE4
ULN2003ADRE4 by Texas Instruments is a NPN BJT transistor with 7 elements and 16 terminals. It has a max VCEsat of 1.6V, IC of 0.5A, and VCE of 50V. Ideal for switching applications, this surface-mount transistor features a Gull Wing terminal form in a small outline package style.
MMBT2907A
Taitron Components
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Package Style (Meter): SMALL OUTLINE;
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Maximum Turn Off Time (toff): 285 ns;
JANTX2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Maximum Turn Off Time (toff): 300 ns; Reference Standard: MIL-19500/255T;
BC817-40
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Transistor Application: SWITCHING;
SMMBT3904WT1G
SMMBT3904WT1G by Onsemi is a NPN BJT transistor with 3 terminals, hFE of 30, and max. power dissipation of 0.15W. Ideal for amplifier applications, it operates at up to 150°C, with Vce(max) of 40V and fT of 300MHz.
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
2N2219A
Vishay Intertechnology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Package Body Material: METAL; Qualification: Not Qualified;
MMBT2222A
Zowie Technology
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): .6 A;
MMBT3904
Panjit International
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; JESD-609 Code: e3;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .35 W; Package Body Material: PLASTIC/EPOXY;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
BC547C
Diodes Incorporated
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A;
Weitronic Enterprise
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .2 A;
2N2907AUB
Microsemi
PNP; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.16 W; Maximum Collector Current (IC): .6 A; Package Style (Meter): SMALL OUTLINE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BCV47E6327HTSA1
Infineon Technologies
BCV47E6327HTSA1 by Infineon is a NPN Darlington BJT with 3 terminals, max. power dissipation of 0.36W, and min. DC current gain of 2000. It operates up to 150°C, has a max. collector-emitter voltage of 60V, and nominal transition frequency of 170MHz. Ideal for small signal applications requiring high current gain and low power dissipation in compact designs.
BCV47,215
Nexperia
NPN; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 220 MHz; Maximum Collector Current (IC): .5 A; Transistor Element Material: SILICON;
NXP Semiconductors' BCV47,215 is a NPN Darlington BJT with 1V VCEsat and 10000 hFE. Ideal for amplifier applications, it has a max IC of 0.5A, 60V VCEO, and operates up to 150°C. This small outline transistor in gull wing package offers high transition frequency at 220MHz.
BCV46E6327HTSA1
Infineon BCV46E6327HTSA1 is a PNP Darlington BJT with 2000 hFE, 60V VCE, and 200MHz fT. Ideal for applications requiring high current gain, low voltage operation, and fast switching in compact designs. Suitable for surface mount configurations in electronic devices where space is limited.
BCV47TA
NPN; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 170 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .5 A;
BCV47,235
BCV47,235 by NXP Semiconductors is a NPN Darlington transistor with a max VCEsat of 1V and hFE of 10000, ideal for amplifier applications. It has a max collector-emitter voltage of 60V, operating temperature up to 150°C, and transition frequency of 220MHz. This small outline package transistor is surface mountable with Gull Wing terminals.
NPN; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 220 MHz; Maximum Collector Current (IC): .5 A; No. of Terminals: 3;
BCV47-TP
Small Signal Bipolar Transistors; Maximum Collector Current (IC): .5 A; Minimum DC Current Gain (hFE): 2000; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
BCV49,115
NPN; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 220 MHz; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .5 A;
NPN; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 220 MHz; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY;
BCV47E6433HTMA1
BCV47E6433HTMA1 by Infineon is a NPN Darlington BJT with 2000 hFE, 60V VCE, and 170MHz fT. Ideal for applications requiring high current gain and voltage amplification in compact electronic devices due to its small outline package and surface mount capability.
BCV47QTA
NPN; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 170 MHz; Maximum Collector Current (IC): .5 A; Peak Reflow Temperature (C): 260;
BCV48,115
PNP; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 220 MHz; Maximum Collector Current (IC): .5 A; Terminal Finish: TIN;
PNP; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 220 MHz; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .5 A;
BCV48H6327XTSA1
PNP; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .5 A; No. of Elements: 1;
BCV49TA
NPN; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 170 MHz; Maximum Collector Current (IC): .5 A; JESD-609 Code: e3;
Zetex Plc
NPN; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 170 MHz; Maximum Collector Current (IC): .5 A; Terminal Position: SINGLE;
BCV47
NPN; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .5 A; Transistor Element Material: SILICON; Maximum Collector-Emitter Voltage: 60 V; No. of Elements: 1;
BCV46T/R
PNP; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 220 MHz; Maximum Collector Current (IC): .5 A; Package Style (Meter): SMALL OUTLINE;
BCV47BKLEADFREE
Central Semiconductor
NPN; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 220 MHz; Transistor Element Material: SILICON; Minimum DC Current Gain (hFE): 10000;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved