Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 30 MHz; Maximum Collector Current (IC): 15 A; Case Connection: COLLECTOR;
Median Price
$7.470
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$2.690
1k+ parts
$1.600
10k+ parts
$1.360
Voyager Components
$2.371
Digiode
$2.983
-
Forefront Electronics and Design
$3.680
Anansix
Magnum Semiconductors LLP
Vyrian
Chip Stock
MRC Electronics
Nova Conductors
LIBRA Elektronik GmbH
GES GmbH
Manotoh
Donberg Electronics Ltd
LittleDiode
Fibra_Brandt Electronic GMBH
R&J Components
ECAB
Aztec Data Supply Inc.
$1.073
Corohmni
$1.632
IDEA Electronic Components Group
$1.771
$1.594
Advanced Electronics
$2.047
$1.944
Corphita
$2.826
Semicontronic
$3.200
$3.120
$3.104
MKK Technologies
$3.330
DigiPath Technology Company
AZTECH Wire
$19.420
Kepictronics
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Lixinc
Infinite Electronics LLP (Excess)
Continental Prestige Electronics
Alle Elektronik GmbH
Argo Parts USA
Parana Technologies
$2.118
Robosynatics
$2.056
Lucentia Tech
Bastille Electronics
iodParts Technologies Inc.
Perfect Parts
RTC Component Inc.
Power Bipolar Junction Transistors (BJT) 2SC5200 attributes and parameters. Explore more Power Bipolar Junction Transistors (BJT) devices from Toshiba
Case Connection:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation Ambient:
Qualification:
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
Maximum VCEsat:
2SC5200 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
Hitano Enterprise
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
Silicon Standard
M39029/56-351
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
TIP112
Changzhou Galaxy Century Microelectronics
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): 2 A; Terminal Form: THROUGH-HOLE; Terminal Position: SINGLE;
2SC5200
Toshiba
2N3055
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 2.5 MHz; Maximum Power Dissipation (Abs): 115 W; Maximum Collector Current (IC): 15 A;
TIP32C
Kec
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Collector Current (IC): 3 A; Terminal Position: SINGLE;
TIP122
Weitron Technology
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 5 A; JEDEC-95 Code: TO-220AB; Terminal Form: THROUGH-HOLE;
Bourns
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 4 A; Package Body Material: PLASTIC/EPOXY; Maximum Collector-Emitter Voltage: 100 V;
TIP36C
Central Semiconductor
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 125 W; Maximum Collector Current (IC): 25 A;
TIP117
Microsemi
PNP; Surface Mount: NO; Maximum Collector Current (IC): 2 A; Qualification: Not Qualified; JESD-30 Code: R-PSFM-T2; JESD-609 Code: e0;
BD13916
BD13916 by Fairchild Semiconductor is a NPN BJT transistor with max. power dissipation of 12.5W and max. collector current of 1.5A, ideal for switching applications. With a min. DC current gain of 100, it operates at up to 150°C and has a max. collector-emitter voltage of 80V in a through-hole package style.
Samsung
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 5 A; Package Body Material: PLASTIC/EPOXY;
BD138
Motorola
PNP; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 1.5 A; Transistor Element Material: SILICON; Maximum Collector-Emitter Voltage: 60 V;
TIP127
Power Innovations
PNP; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 5 A; Case Connection: COLLECTOR; Terminal Position: SINGLE;
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 5 A; Transistor Element Material: SILICON;
Inchange Semiconductor
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Transistor Element Material: SILICON;
BCP56-16
Diodes Incorporated
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 125 MHz; Maximum Collector Current (IC): 1 A; Package Shape: RECTANGULAR;
TIP42C
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Collector Current (IC): 6 A; Package Style (Meter): FLANGE MOUNT;
Rectron
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; JESD-30 Code: R-PSFM-T3;
TIP32C by Texas Instruments is a PNP BJT transistor with 3 terminals, capable of handling up to 40W power dissipation. It operates at a max temperature of 150°C and has a collector-emitter voltage of 100V. Ideal for switching applications due to its high collector current of 3A and transition frequency of 3MHz.
MJD122T4
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 8 A; Maximum Time At Peak Reflow Temperature (s): 30;
TIP115
SPC TECHNOLOGY/ MULTICOMP
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Unisonic Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 30 MHz; Maximum Collector Current (IC): 15 A; Package Style (Meter): FLANGE MOUNT;
2SC5200 by STMicroelectronics is a NPN BJT transistor with 150W power dissipation, 230V max collector-emitter voltage, and 15A max collector current. Ideal for switching applications due to its single configuration and 30MHz transition frequency. Package style is flange mount with matte tin terminal finish.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 30 MHz; Maximum Power Dissipation (Abs): 150 W; Maximum Collector Current (IC): 15 A;
Micro Commercial Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 15 A; Transistor Application: AMPLIFIER; Maximum Collector-Emitter Voltage: 230 V;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Nominal Transition Frequency (fT): 30 MHz; Maximum Collector Current (IC): 15 A; Transistor Element Material: SILICON; No. of Elements: 1;
2SC5200OTU
Onsemi
2SC5200OTU by Onsemi is a NPN power BJT with max. collector-emitter voltage of 250V, max. collector current of 17A, and max. power dissipation of 150W. Ideal for amplifier applications due to its single configuration and silicon transistor element material.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 30 MHz; Maximum Power Dissipation (Abs): 150 W; Maximum Collector Current (IC): 17 A;
2SC5200N(S1,E,S)
2SC5200-O
Toshiba's 2SC5200-O is a NPN BJT transistor with max VCEsat of 3V, hFE of 80, and IC of 15A. Ideal for amplifier applications due to its max power dissipation of 150W and collector-emitter voltage of 230V. Suitable for high-power audio amplifiers or industrial equipment requiring robust performance in a rectangular package style.
2SC5200-O(S1,F
Power Bipolar Transistors;
2SC5200O
2SC5200RTU
The Onsemi 2SC5200RTU is a NPN power BJT with max. collector-emitter voltage of 250V, ideal for amplifier applications. Featuring a max. power dissipation of 150W and max. collector current of 17A, it operates at up to 150°C. With a min DC current gain of 55 and transition frequency of 30MHz, this transistor offers high performance in a flange mount package for through-hole mounting.
2SC5171
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): 2 W; Maximum Collector Current (IC): 2 A;
2SC5994-TD-E
Sanyo Semiconductor
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 420 MHz; Maximum Power Dissipation (Abs): 3.5 W; Maximum Collector Current (IC): 2 A;
2SC5171,Q(J
2SC5171,Q(J by Toshiba is a NPN BJT transistor with max. Vce of 180V and max. Ic of 2A. It has hFE of 50, ideal for amplifier applications due to its high transition frequency of 200MHz. The package style is flange mount with through-hole terminals in a rectangular shape, making it suitable for various electronic designs.
2SC5354-1(F)
2SC5569-TD-E
Onsemi's 2SC5569-TD-E is a NPN BJT transistor with max. Vce of 50V and Ic of 7A. With hFE of 200, it operates at fT of 330MHz for switching applications in SMT packages.
2SC5200LO
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 30 MHz; Maximum Collector Current (IC): 15 A; Transistor Element Material: SILICON;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved