Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STMicroelectronics' M27C64A-15F1 is an 8KX8 EPROM with 70°C max temp, 150 ns access time, and 5V supply. Ideal for commercial applications requiring a reliable, high-density UVPROM memory IC with 8192 words and common I/O type.
Median Price
$8.580
Lifecycle Status
Suppliers In-Stock
49
In-Stock Inventory
1k+
Component Electronics Inc.
1+ parts
$7.690
100+ parts
$5.770
1k+ parts
$5.000
10k+ parts
-
Forefront Electronics and Design
Voyager Components
$9.900
Vyrian
Digiode
Anansix
Digital Electronic Gebert Verwaltungs UG
Nova Conductors
Jameco Electronics
NexGen Digital
Vectronix, Inc
Standard Data Resources
J2 Sourcing AB
ComSIT Distribution GmbH
Corel Iberica Componentes, S.L.
Rebound Electronics
Inventory MP
LIBRA Elektronik GmbH
MRC Electronics
Semi Source
Cyclops Electronics Ltd
Mil-Aero Solutions, Inc.
Q Components
ECAB
Prism Electronics
Sinequanon
J & M Industries LLC
A&K Electronics
Bristol Electronics
Electronic Expediters
LWI Electronics Inc
LittleDiode
Executive Electronics, Inc.
Halfin
Speed Components Ltd
Atlantic Semiconductor
Velocity Electronics
Sunrise Surplus Inc.
Electronics Depot
GES GmbH
Pegasus Components GmbH
Euro-Tech
North Shore Components
ACDS - Activité Composants Distribution Service
Manoshevitz Elec. Sales
Dan-Mar Components
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Holdelec - ElecDif-Pro
ABC Electronics Ltd.
Corohmni
$2.308
IDEA Electronic Components Group
$4.242
$3.818
Aztec Data Supply Inc.
$4.800
MKK Technologies
$7.977
DigiPath Technology Company
Ampacity Inc.
$9.000
AZTECH Wire
$15.418
QUARKTWIN TECHNOLOGY LTD
Lixinc
Kepictronics
Microchip USA
Corphita
Continental Prestige Electronics
Authorized Procurement Solutions
Argo Parts USA
Alle Elektronik GmbH
Advanced Electronics
Parana Technologies
$5.072
EMSNET (Excess)
Perfect Parts
Bastille Electronics
Metaverse IC Inc.
A-Z Elektronik GmbH
Standard Data Resources (Excess)
Eliminating Global Boundries, Inc
FE SAS
Cyclops Electronics Ltd (Excess)
Speed Components Ltd (Excess)
A-Plus Industry Inc.
Assy Fe
The ceramic and metal-sealed cofired package body material ensures durability and reliability for the product, making it suitable for long-term use.
Operating at a nominal supply voltage of 5V ensures compatibility with standard operating conditions and power sources.
With an organization of 8KX8, this EPROM offers a good balance of memory capacity and access speed for a variety of applications.
The 3-STATE output characteristics allow for flexible control of the output signal, enabling efficient data transfer and manipulation.
Utilizing CMOS technology ensures low power consumption and improved performance, making this EPROM an energy-efficient choice for electronic devices.
EPROM M27C64A-15F1 attributes and parameters. Explore more EPROM devices from STMicroelectronics
Maximum Access Time:
Input/Output Type:
JESD-30 Code:
JESD-609 Code:
Length:
Memory Density:
Memory IC Type:
Memory Width:
No. of Functions:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Output Characteristics:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Parallel or Serial:
Power Supplies (V):
Programming Voltage (V):
Qualification:
Maximum Seated Height:
Maximum Standby Current:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
M27C64A-15F1 Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.61
SB
8542.32.00.60
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
North American Philips Discrete Products Div
5962-9175204MXA
Texas Instruments
Texas Instruments' 5962-9175204MXA EPROM features 512KX8 organization, CMOS technology, and 150 ns max access time. Ideal for military applications due to MIL temperature grade and UVPROM memory IC type.
TMS27C128-1JE
TMS27C128-1JE by Texas Instruments is a 16KX8 EPROM with 150ns access time, 3-state output, and operates at -40 to 85 °C. It is used in industrial applications requiring UVPROM memory technology for parallel data transfer.
TMS2532A-35JP4
TMS2532A-35JP4 by Texas Instruments is a 4KX8 EPROM with 3-STATE output, 350 ns access time, and 32768 bit memory density. It is commonly used in commercial applications requiring fast data retrieval and storage in a compact IN-LINE package style.
TMS27C128-25JE
TMS27C128-25JE by Texas Instruments is a 16KX8 EPROM with 250ns access time, 5V supply voltage, and 3-STATE output. It is ideal for industrial applications requiring reliable non-volatile memory storage in a ceramic package.
TMS27C240-8JL
TMS27C240-8JL by Texas Instruments is a 256KX16 EPROM with 80ns access time, 3-STATE output, and operates at 5V. It is used in commercial applications for storing data parallelly with a memory density of 4194304 bit.
TMS27C510-15JL
TMS27C510-15JL by Texas Instruments is a 64KX8 EPROM with 150 ns access time, operating at 5V. It features 3-STATE output characteristics and uses CMOS technology for parallel data transfer applications. The package style is IN-LINE, WINDOW, making it suitable for commercial temperature grade environments.
TMS27C040-80JE4
TMS27C040-80JE4 by Texas Instruments is a 512KX8 EPROM with 80 ns access time, 5V supply voltage, and CMOS technology. It is used in industrial applications for storing 524288 words of data in parallel mode with a memory density of 4194304 bits.
TMS2764A-45JL
TMS2764A-45JL by Texas Instruments is an EPROM with 8KX8 organization, 65536 bit memory density, and 450 ns max access time. It operates in asynchronous mode at a supply voltage of 5V. Widely used in commercial applications requiring reliable non-volatile memory storage.
TMS27C510-20JL4
TMS27C510-20JL4 by Texas Instruments is a 64KX8 EPROM with 200ns access time, operating at 5V. It features a CMOS technology, 32 terminals in an IN-LINE package style, and supports parallel input/output. Ideal for commercial applications requiring reliable non-volatile memory storage.
D27128A25
Rochester Electronics
D27128A25 by Rochester Electronics is a 16KX8 EPROM with 131072 bit memory density. It operates at 5V, has a programming voltage of 12.5V, and features a max access time of 250ns. Ideal for applications requiring reliable non-volatile memory storage in commercial temperature environments.
M27C512-90F1
STMicroelectronics
The STMicroelectronics M27C512-90F1 EPROM features 64KX8 organization, 90 ns access time, and 5V nominal voltage. Commonly used in commercial applications, this CMOS technology-based memory IC offers a memory density of 524288 bits and operates in parallel mode with a max standby current of 0.0001 Amp.
NTE27C64-15D
NTE27C64-15D by Nte Electronics is an EPROM with 8KX8 organization, 8192 words, and 150 ns access time. It operates at 5V with a memory density of 65536 bits. Ideal for commercial applications requiring fast parallel memory access in a compact IN-LINE package.
SMJ27C210-20JM
SMJ27C210-20JM by Texas Instruments is a 64KX16 EPROM with 3-STATE output, operating at -55 to 125 °C. It has a supply voltage of 4.5-5.5V and max access time of 200ns. Ideal for military applications requiring high memory density and fast data retrieval in harsh environments.
TMS27C256-17JE4
TMS27C256-17JE4 by Texas Instruments is a 32KX8 EPROM with 170 ns access time, 3-STATE output, and 262144 bit memory density. It operates at -40 to 85 °C and uses CMOS technology. Ideal for industrial applications requiring fast, reliable non-volatile memory storage.
SMJ27C256-20JM
SMJ27C256-20JM by Texas Instruments is a 32KX8 EPROM with 3-STATE output, operating at -55 to 125 °C. It has a supply voltage of 4.5-5.5V and max access time of 200ns. Ideal for military applications requiring reliable non-volatile memory storage in harsh environments.
TMS27C256-120JL4
TMS27C256-120JL4 by Texas Instruments is a 32KX8 EPROM with 120 ns access time, 5V supply voltage, and 3-STATE output. It is used in commercial applications requiring fast memory access and reliable data storage.
5962-8961403MYC
STMicroelectronics' 5962-8961403MYC EPROM features 128KX8 organization, operates at -55 to 125 °C, with a supply voltage of 4.5-5.5 V. Ideal for military applications due to MIL-STD-883 screening level and UVPROM memory IC type.
TMS2764A-25JL
TMS2764A-25JL by Texas Instruments is an EPROM with 8KX8 organization, 65536 bit memory density, and 250 ns max access time. It operates in asynchronous mode at a supply voltage of 5V, suitable for commercial temperature grade applications requiring reliable non-volatile memory storage.
M27C1001-20F6
M27C1001-20F6 EPROM by STMicroelectronics features 128KX8 organization, 3-STATE output, and 200 ns access time. Ideal for industrial applications requiring reliable non-volatile memory storage with a max supply voltage of 5.5 V.
M27C1001-15F1X
STMicroelectronics M27C1001-15F1X is a 128Kx8 EPROM with 120ns access time, operating at 5V. It features asynchronous mode, 3-state output, and common I/O type. Widely used in commercial applications for memory storage due to its CMOS technology and through-hole terminal form.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M27C256B-10F1
STMicroelectronics' M27C256B-10F1 EPROM features 32KX8 organization, 100ns access time, and 262144-bit memory density. Commonly used in commercial applications, this CMOS technology-based UVPROM operates at a nominal voltage of 5V with a programming voltage of 12.75V.
M27C256B-12F1
M27C256B-12F1 EPROM by STMicroelectronics features 32KX8 organization, 3-STATE output, and operates in ASYNCHRONOUS mode. Commonly used for memory storage applications due to its 262144 bit density, with a programming voltage of 12.75V and max access time of 120ns.
M27C256B-15F1
M27C256B-15F1 by STMicroelectronics is a 32KX8 EPROM with 150 ns access time, operating at 5V. It features a CMOS technology, through-hole terminal form, and 3-STATE output characteristics. Ideal for commercial applications requiring reliable non-volatile memory storage in a compact rectangular package.
M27C256B-70XF1
STMicroelectronics M27C256B-70XF1 is a 32KX8 EPROM with 70ns access time, operating at 5V. It features a CMOS technology, 3-STATE output, and parallel interface. Commonly used in commercial applications requiring non-volatile memory storage.
M27C512-15F6
M27C512-15F6 EPROM by STMicroelectronics features 64KX8 organization, 150 ns access time, and 524288 bit memory density. It is commonly used in industrial applications requiring reliable non-volatile memory storage with a parallel interface.
M27C512-90F6
STMicroelectronics M27C512-90F6 is a 64KX8 EPROM with 90 ns access time, operating at 5V. It features a 3-STATE output and is ideal for industrial applications requiring reliable non-volatile memory storage in a ceramic, glass-sealed package.
M27C512-15F1
M27C512-15F1 by STMicroelectronics is a 64KX8 EPROM with 150 ns access time, operating at 5V. It features a CMOS technology, 3-STATE output, and through-hole terminal form. Commonly used in commercial applications requiring non-volatile memory storage with a capacity of 524288 bits.
M27C512-12F1
M27C512-12F1 EPROM by STMicroelectronics features 64KX8 organization, 120 ns access time, and 524288 bit memory density. Commonly used in commercial applications for storing data with a supply voltage of 5V. Operating temperature ranges from 0 to 70 °C.
M27C512-10F1
M27C512-10F1 EPROM by STMicroelectronics features 64KX8 organization, 100 ns access time, and 524288 bit memory density. Commonly used in applications requiring reliable non-volatile memory storage with a parallel interface.
M27C1001-10F1
M27C1001-10F1 by STMicroelectronics is a 128KX8 EPROM with 100ns access time. It operates at 5V, has 32 terminals, and uses CMOS technology. Commonly used in applications requiring non-volatile memory storage with a memory density of 1048576 bits.
M27C512-15F6X
The STMicroelectronics M27C512-15F6X is a 64Kx8 EPROM with 150ns access time, operating at 5V. It features a 3-STATE output and common I/O type, suitable for industrial applications. With a ceramic package and through-hole terminals, it offers reliable memory storage in harsh environments.
M27C1001-12F1
The STMicroelectronics M27C1001-12F1 is a 128KX8 EPROM with 120 ns access time, operating at 5V. It features a CMOS technology, 3-STATE output characteristics, and through-hole terminal form. Ideal for applications requiring reliable non-volatile memory storage in commercial temperature environments.
M27C1001-15F1
M27C1001-15F1 EPROM by STMicroelectronics features 128KX8 organization, 150 ns access time, and 1048576 bit memory density. It is ideal for commercial applications requiring a parallel CMOS technology with a max supply voltage of 5.5 V and operating temperature range of 0 to 70°C.
M27C256B-12F6
M27C256B-12F6 by STMicroelectronics is a 32KX8 EPROM with 3-STATE output, operating at 5V. It has a programming voltage of 12.75V and max access time of 120ns. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact IN-LINE package style.
M27C1001-10F1L
EPROMs; Temperature Grade: COMMERCIAL; No. of Terminals: 32; Package Code: DIP; Package Shape: RECTANGULAR; Terminal Finish: Tin/Lead (Sn/Pb);
M27C512-12F3
UVPROM; Temperature Grade: AUTOMOTIVE; No. of Terminals: 28; Package Code: WDIP; Package Shape: RECTANGULAR; Minimum Supply Voltage (Vsup): 4.5 V;
M27C64A-10F1
UVPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: WDIP; Package Shape: RECTANGULAR; Package Style (Meter): IN-LINE, WINDOW;
M27C4001-15F1
M27C4001-15F1 by STMicroelectronics is a 512KX8 EPROM with an operating voltage of 5V. It has a max access time of 100ns and is commonly used in applications requiring non-volatile memory storage.
M27C1001-10F1X
STMicroelectronics' M27C1001-10F1X is a 128Kx8 EPROM with 100ns access time, operating at 5V. It features asynchronous mode and 3-state output, suitable for commercial temperature grade applications. The memory density is 1048576 bits with parallel interface and through-hole terminal form.
M27C512-10F1E
M27C512-10F1E EPROM by STMicroelectronics features 64KX8 organization, 100 ns access time, and 524288 bit memory density. It is commonly used in commercial applications requiring a parallel interface with a supply voltage of 5V.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved