Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI4455-B1A-FM by Silicon Labs is a Telecom IC with 20 terminals, operating b/w -40 to 85°C. It has a square shape, matte tin finish, and nominal voltage of 3.3V. Ideal for telecom circuits due to its low profile chip carrier package style and industrial temperature grade suitability.
Median Price
$3.318
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Vyrian
1+ parts
$1.250
100+ parts
-
1k+ parts
10k+ parts
Digiode
$5.386
Chip Stock
Amalfi Trading
Cogito LLC
Nova Conductors
Ampacity Inc.
$4.820
Corphita
$5.103
Corohmni
$6.181
Advanced Electronics
$6.357
Continental Prestige Electronics
Argo Parts USA
Authorized Procurement Solutions
Perfect Parts
Kepictronics
Aranea Global
Surface mount design allows for easier and more efficient PCB assembly, saving time and cost.
Square package shape helps in maximizing space efficiency on the PCB.
Ample number of terminals provide flexibility for interfacing with other components in the telecom system.
High maximum operating temperature ensures reliable performance even in harsh environmental conditions.
Wide range of operating temperature allows for use in various climates and environments.
Matte tin finish enhances solderability and conductivity for improved performance.
Low nominal supply voltage helps in reducing power consumption and heat dissipation.
Moisture sensitivity level of 2 indicates that the component can withstand multiple reflow cycles without degradation.
Other Function Telecom Interface ICs SI4455-B1A-FM attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
SI4455-B1A-FM Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Site Change 18/Jan/2022
PCN Packaging - IC/SIP MOQ Chg 11/Jan/2022 Labeling Change 14/Dec/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
Eic Semiconductor
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
Onsemi
BT121-A-V2-IAP
Silicon Labs
Silicon Labs BT121-A-V2-IAP is a telecom IC with 33 terminals, operating at -40 to 85°C. It has a nominal voltage of 3.3V and terminal pitch of 1mm. This surface-mount IC in rectangular package is ideal for industrial applications requiring compact telecom circuit solutions.
451-00002
Laird Technologies
Laird Technologies' 451-00002 is a surface mount telecom IC with 71 terminals. Operating b/w -40 to 85°C, it has a seated height of 2.35mm and nominal voltage of 3.3V. Ideal for telecom circuits, it offers data rates up to 2 Mbps in microelectronic assemblies.
AD73311ARSZ-REEL
Analog Devices
AD73311ARSZ-REEL by Analog Devices is a 16-bit linear coding telecom IC with 20 terminals and a 3/5 V supply voltage. It operates in industrial temperature range (-40 to 85°C) and features a filter for precise signal processing. This small outline, surface-mount IC is ideal for telecom circuit applications requiring high gain tolerance and CMOS technology.
ADRV9002BBCZ
Analog Devices ADRV9002BBCZ is a telecom IC with 196 terminals in a grid array package. It operates b/w -40 to 110°C, with a nominal voltage of 1V. Ideal for telecom circuits, it has a thin profile and fine pitch design for surface mounting applications.
BM78SPPS5MC2-0002AA
Microchip Technology
BM78SPPS5MC2-0002AA by Microchip Tech is a RECTANGULAR MICROELECTRONIC ASSEMBLY with 33 terminals. Operating temp: -20 to 70°C, peak reflow temp: 255°C. Used in telecom circuits, it has a nominal voltage of 1.9V and terminal pitch of 1.1mm for commercial applications.
ADRF5044BCCZN-R7
Analog Devices' ADRF5044BCCZN-R7 is a 24-terminal SQUARE package IC with -40 to 85 °C operating temp. Ideal for TELECOM CIRCUIT applications, it has a 3.3 V nominal voltage and 0.5 mm terminal pitch. With NICKEL PALLADIUM GOLD finish, it suits INDUSTRIAL-grade telecom interfaces.
NRF52840-QIAA-R
Nordic Semiconductor Asa
NRF52840-QIAA-R by Nordic Semiconductor Asa is a telecom IC with 73 terminals, operating from -40 to 85°C. It has a nominal voltage of 3V and terminal pitch of 0.5mm. This square-shaped chip carrier is suitable for industrial applications requiring a very thin profile.
MAX5980GTJ+
Maxim Integrated
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
DWM1001C
Qorvo
DWM1001C by Qorvo is a telecom IC with 34 terminals, operating at -40 to 85°C. It offers a data rate of 6.8 Mbps and operates at 3.3V supply voltage. This surface-mount device in a rectangular package is ideal for industrial applications requiring high-speed telecommunications interfaces.
453-00045C
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 50; Peak Reflow Temperature (C): 250;
HMC799LP3ETR
Analog Devices' HMC799LP3ETR is a 16-terminal telecom IC with 5V supply, operating from -40 to 85°C. It's a surface-mount chip carrier package suitable for industrial applications, drawing max 80mA current. With matte tin finish and quad terminal position, it's ideal for telecom circuit interfaces.
SX1308IMLTRT
Semtech
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
RFFC2071ATR13
Rf Micro Devices
ATA5551M-PPMY
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: UNSPECIFIED; Package Shape: UNSPECIFIED; JESD-30 Code: X-XXSS-X; Surface Mount: NO;
AT86RF215IQ-ZUR
AT86RF215IQ-ZUR by Microchip Technology is a telecom IC with RF and baseband circuit. It operates at temperatures ranging from -40 to 85 °C, has a package size of 7x7 mm, and uses a terminal pitch of 0.5 mm. It is suitable for applications in telecommunications and other industries.
SIM7020E
Simcom Wireless Solutions
SIM7020E by Simcom Wireless Solutions is a telecom IC with 42 terminals, operating from -40 to 85°C. It has a data rate of 0.0625 Mbps and nominal voltage of 3V. Ideal for industrial applications requiring low-power telecom circuitry in compact microelectronic assemblies.
SJA1105EL
NXP Semiconductors
NXP Semiconductors' SJA1105EL is a telecom IC with 159 terminals in a low-profile grid array package. It operates b/w -40°C to 105°C, with a supply voltage of 1.2V. Suitable for telecom circuits, it has a terminal pitch of 0.8mm and meets AEC-Q100 screening standards.
BGM113A256V21R
BGM113A256V21R by Silicon Labs is a telecom IC with 36 terminals, operating temperature range of -40 to 85°C, and nominal voltage of 3.3V. It is designed for industrial applications requiring a surface mount rectangular package style with a seated height of 2mm.
TM1062DVA1
Pulse Electronics
TM1062DVA1 by Pulse Electronics is a 28-terminal hybrid IC with 5V supply, suitable for telecom circuits. It operates b/w -55°C to 125°C, MIL grade, in a small outline package. Features Gull Wing terminals on a rectangular body made of plastic/epoxy.
EVA-M8M-0-10
U-blox Ag
EVA-M8M-0-10 by U-blox Ag is a telecom IC with 43 terminals, operating at -40 to 85°C. It has a nominal voltage of 3.3V and is surface mountable in a square package style. Ideal for industrial applications requiring precise telecom circuit functionality.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI4463-C2A-GMR
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
SI4432-B1-FMR
SI4432-B1-FMR by Silicon Labs is a 20-terminal telecom IC with a square shape and chip carrier package. Operating b/w -40 to 85°C, it has a nominal voltage of 3V. Ideal for industrial applications requiring a very thin profile and no-lead terminal form.
SI4460-C2A-GMR
SI4461-C2A-GMR
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL;
SI4460-C2A-GM
SI4432-B1-FM
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE;
SI4463-C2A-GM
SI4455-B1A-FMR
SI4455-B1A-FMR by Silicon Labs is a 20-terminal SQUARE chip carrier with matte tin finish. Operating b/w -40 to 85 °C, it's an industrial-grade telecom circuit IC with a 3.3V supply voltage. With a compact size of 3x3mm and terminal pitch of 0.5mm, it's ideal for telecom interface applications.
SI4455-C2A-GMR
SI4455-C2A-GMR by Silicon Labs is a 20-terminal telecom IC with 3.3V supply voltage, -40 to 85°C operating temp range, and 0.5mm terminal pitch. It's a square chip carrier suitable for industrial applications requiring very thin profile components.
SI4461-C2A-GM
SI4438-B1C-FMR
SI4438-B1C-FMR by Silicon Labs is a 20-terminal chip carrier with matte tin finish. Operating from -40 to 85°C, it's a telecom circuit IC with 3.3V supply voltage and quad terminal position. Ideal for industrial applications due to its very thin profile and square package shape.
SI4431-B1-FM
SI4432-V2-FMR
Seiko Instruments Usa
Ablic
SI4438-C2A-GM
SI4431-B1-FMR
SI4455-C2A-GM
SI4438-BXX-FM
SI4438-B1C-FM
SI4438-C2A-GMR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved