Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI4438-C2A-GM by Silicon Labs is a telecom IC with 20 terminals, operating at -40 to 85°C. It has a nominal voltage of 3.3V and terminal pitch of 0.5mm. This square-shaped chip carrier is ideal for industrial applications requiring very thin profiles and surface mount compatibility.
Median Price
$4.480
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Arrow
1+ parts
$1.381
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$2.340
Mouser Electronics
$6.620
$4.720
$3.500
DigiKey
$7.430
$5.441
$4.739
$4.630
Verical
Digiode
$2.223
Vyrian
Chip Stock
Nova Conductors
Corphita
$2.106
Ampacity Inc.
$4.330
Advanced Electronics
$12.274
$11.169
$10.065
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Kepictronics
Surface mount capability makes it easier to assemble and mount the IC onto circuit boards, saving time and effort.
Square package shape allows for efficient use of space on the circuit board, maximizing compactness.
Having 20 terminals provides enough connectivity options for various telecom interface functions.
With a high maximum operating temperature, this IC can withstand demanding industrial environments without overheating.
Operating at a nominal supply voltage of 3.3V makes it compatible with a wide range of systems and power sources.
Other Function Telecom Interface ICs SI4438-C2A-GM attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SI4438-C2A-GM Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Si4x5x/Si4x6x 08/Mar/2023
PCN Packaging - IC/SIP MOQ Chg 11/Jan/2022 Labeling Change 14/Dec/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
Cheng-yi Electronic
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
Pro-an Electronic
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
1N4148WT-7
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
BSS138W-7-F
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BM77SPPS3MC2-0007AA
Microchip Technology
BM77SPPS3MC2-0007AA by Microchip Technology is a telecom IC with 30 terminals, operating at -20 to 70°C. It has a data rate of 0.1125 Mbps and nominal voltage of 3.3V. This rectangular package is surface mountable and suitable for various telecom interface applications.
MAX7033EUI+
Maxim Integrated
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: TSSOP; Package Shape: RECTANGULAR;
SX1502I087TRT
Semtech
Semtech's SX1502I087TRT is a telecom IC with 20 terminals in a square chip carrier package. Operating from -40 to 85°C, it has a nominal voltage of 3.3V and matte tin terminal finish. Ideal for telecom circuits, this IC is surface mountable and features an industrial temperature grade.
RN41-I/RM630
Microchip Technology's RN41-I/RM630 is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and gold over nickel terminal finish. Suitable for industrial applications, it comes in a rectangular package style with surface mount capability.
EQCO62T20.3-TRAY
EQCO62T20.3-TRAY by Microchip Technology is a telecom IC with 16 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a nominal voltage of 1.2V. Ideal for telecom circuit applications, it features a very thin profile and no-lead terminal form for industrial use.
RCB-F9T-0
U-blox Ag
TELECOM CIRCUIT;
RN4020-V/RMBEC133
RN4020-V/RMBEC133 by Microchip Tech is a telecom IC with 24 terminals, operating at -30 to 85°C. It has a data rate of 1 Mbps and operates at 3.3V supply voltage. Ideal for telecom applications due to its TS16949 screening level and compact rectangular package style.
TM266DVA1
Inrcore
TELECOM CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP28,.5;
PN5321A3HN/C106;55
NXP Semiconductors' PN5321A3HN/C106;55 is a telecom IC with 40 terminals, operating b/w -30 to 85°C. It has a nominal voltage of 3.4V and terminal pitch of 0.5mm. This chip carrier package is suitable for various telecom circuit applications due to its compact size and surface mount capability.
TDA7116FHTMA1
Infineon Technologies
TDA7116FHTMA1 by Infineon is a telecom IC with 10 terminals, operating from -40 to 85°C. It has a small outline package style, matte tin finish, and dual terminal position. This IC is suitable for telecom circuits requiring a nominal voltage of 3V in industrial temperature environments.
SAM-M8Q-0
TELECOM CIRCUIT; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
ATWILC3000-MR110CA
ATWILC3000-MR110CA by Microchip Technology is a telecom IC with 65 Mbps data rate, operating at -40 to 85°C. It has 36 terminals in a rectangular package style, suitable for surface mount applications. With a nominal voltage of 3.3V, it is ideal for various telecom interface functions.
ANNA-B112-00B
ANNA-B112-00B by U-blox Ag is a telecom IC with 52 terminals, operating at -40 to 85°C. It has a data rate of 2 Mbps and nominal voltage of 3V. This square-shaped, surface-mount package is ideal for industrial applications requiring high-speed telecom circuit functionality.
NEO-M8U-06B
NEO-M8U-06B by U-blox Ag is a telecom IC with 24 terminals, operating at -40 to 85°C. It has a supply voltage of 3V and MSL level of 4, suitable for industrial applications requiring precise positioning and timing. The compact rectangular package measures 12.2mm x 16mm with a low seated height of 2.6mm, making it ideal for surface mount designs in automotive or IoT devices.
HTSH5601ETK,118
NXP Semiconductors' HTSH5601ETK,118 is a telecom IC with 2 terminals in a small outline package. It operates b/w -25°C to 85°C and can withstand peak reflow temperature of 260°C for 30s. Ideal for telecom circuit applications due to its surface mount capability and dual terminal position.
CY7B933-JXIT
Cypress Semiconductor
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
SIM800C
Simcom Wireless Solutions
SIM800C by Simcom Wireless Solutions is a telecom IC with 0.0856 Mbps data rate. It operates in industrial temperature range (-40 to 85 °C) and has 42 terminals in a rectangular package. Ideal for IoT, M2M, and GSM applications due to its surface mount capability and quad terminal position.
RN4678APL-V/RM120
RN4678APL-V/RM120 by Microchip Technology is a telecom IC with 33 terminals, operating b/w -20 to 70°C. It has a supply voltage of 1.9V and terminal pitch of 1.1mm. This surface-mount rectangular package is ideal for telecom circuit applications due to its compact size and commercial temperature grade suitability.
CC2530F256RHAR
CC2530F256RHAR by Texas Instruments is a telecom IC with 40 terminals, operating from -40 to 125°C. It has a supply voltage of 3V, terminal pitch of 0.5mm, and MSL level of 3. Ideal for automotive applications due to its nickel palladium gold finish and no-lead terminal form.
MFRC63002HN,151
NXP Semiconductors' MFRC63002HN,151 is a telecom IC with 32 terminals in a square chip carrier package. Operating b/w -25 to 85°C, it has a nominal voltage of 5V and terminal pitch of 0.5mm. Ideal for telecom circuits, this IC is surface mountable and features a max seated height of 1mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI4463-C2A-GMR
Silicon Labs
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
SI4432-B1-FMR
SI4432-B1-FMR by Silicon Labs is a 20-terminal telecom IC with a square shape and chip carrier package. Operating b/w -40 to 85°C, it has a nominal voltage of 3V. Ideal for industrial applications requiring a very thin profile and no-lead terminal form.
SI4460-C2A-GMR
SI4461-C2A-GMR
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL;
SI4460-C2A-GM
SI4432-B1-FM
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE;
SI4463-C2A-GM
SI4455-B1A-FMR
SI4455-B1A-FMR by Silicon Labs is a 20-terminal SQUARE chip carrier with matte tin finish. Operating b/w -40 to 85 °C, it's an industrial-grade telecom circuit IC with a 3.3V supply voltage. With a compact size of 3x3mm and terminal pitch of 0.5mm, it's ideal for telecom interface applications.
SI4455-C2A-GMR
SI4455-C2A-GMR by Silicon Labs is a 20-terminal telecom IC with 3.3V supply voltage, -40 to 85°C operating temp range, and 0.5mm terminal pitch. It's a square chip carrier suitable for industrial applications requiring very thin profile components.
SI4461-C2A-GM
SI4438-B1C-FMR
SI4438-B1C-FMR by Silicon Labs is a 20-terminal chip carrier with matte tin finish. Operating from -40 to 85°C, it's a telecom circuit IC with 3.3V supply voltage and quad terminal position. Ideal for industrial applications due to its very thin profile and square package shape.
SI4431-B1-FM
SI4432-V2-FMR
Seiko Instruments Usa
Ablic
SI4455-B1A-FM
SI4431-B1-FMR
SI4455-C2A-GM
SI4438-BXX-FMR
SI4438-BXX-FM
SI4438-C2A-GMR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved