Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL;
Median Price
$6.826
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Arrow
1+ parts
$5.978
100+ parts
$4.480
1k+ parts
$3.895
10k+ parts
$3.818
Newark
$6.740
$4.930
$4.470
-
Element14
$5.074
$4.161
DigiKey
$6.880
$5.035
$4.383
$4.281
Mouser Electronics
$7.070
$5.030
$4.560
Farnell
$7.218
$4.879
$4.045
RS (Exports)
$5.350
Verical
Nova Conductors
$4.043
Digiode
$6.156
Chip Stock
Vyrian
Inventory MP
Bristol Electronics
Ampacity Inc.
$3.550
Aranea Global
$3.962
$3.804
Argo Parts USA
$3.970
Continental Prestige Electronics
$5.710
$3.860
Corphita
$5.832
Andel Nordic
$8.932
$8.575
Other Function Telecom Interface ICs SI4461-C2A-GM attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
Telecom IC Type:
Temperature Grade:
SI4461-C2A-GM Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99+
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
NEO-6M-0
U-blox Ag
NEO-6M-0 by U-blox Ag is a telecom IC with 24 terminals, AEC-Q100 screening level, and operates b/w -40°C to 85°C. It features a rectangular package style suitable for industrial applications requiring a 3V nominal voltage.
BGM220SC22HNA2
Silicon Labs
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260;
SX1278IMLTRT
Semtech
Semtech's SX1278IMLTRT is a 28-terminal telecom IC with 3.3V supply voltage, operating from -40 to 85°C. It features a square chip carrier package and matte tin finish, suitable for industrial applications requiring reliable telecom circuit interfaces in compact spaces.
SN65DSI86IPAPQ1
Texas Instruments
SN65DSI86IPAPQ1 by Texas Instruments is a telecom interface IC with 64 terminals in a square package. It operates b/w -40 to 85°C, with terminal finish of NiPdAu. This IC is suitable for industrial applications requiring a nominal voltage of 1.2V and features gull wing terminal form.
MGM12P32F1024GE-V2
TELECOM CIRCUIT;
SJA1105ELY
NXP Semiconductors
NXP Semiconductors' SJA1105ELY is a telecom IC with AEC-Q100 screening. It features TIN SILVER COPPER terminal finish, 260°C peak reflow temp, and MSL of 3. Ideal for telecom circuit applications requiring high reliability in automotive environments.
ODIN-W260-01B-01
TELECOM CIRCUIT; Moisture Sensitivity Level (MSL): 4;
BM20SPKS1NBC-0001AA
BM20SPKS1NBC-0001AA by Microchip Technology is a Telecom IC with 40 terminals, operating at -20 to 70°C. It has a supply voltage of 3.7V and terminal pitch of 1.2mm. Ideal for telecom applications due to its compact rectangular package style and surface mount capability.
BMD-300-A-R-10
The U-blox Ag BMD-300-A-R-10 is a surface mount telecom IC with 47 terminals. It operates in industrial temperature range (-40 to 85 °C) and has a nominal voltage of 3V. With a data rate of 2 Mbps, it's ideal for applications requiring high-speed telecommunications functionality.
NINA-B112-01B-00
BLE112-A-V1
BLE112-A-V1 by Silicon Labs is a surface mount telecom IC with 31 terminals. It operates in industrial temperature range (-40 to 85°C) and has a compact package style (12.05mm x 18.1mm). Ideal for applications requiring low-power wireless communication.
MFRC63003HNE
TELECOM CIRCUIT; JESD-609 Code: e4; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 2; Terminal Finish: NICKEL PALLADIUM GOLD SILVER;
ESP32-WROVER-E
Espressif Systems (shanghai)
ESP32-WROVER-E by Espressif Systems is a telecom IC with 150 Mbps data rate, operating at -40 to 85°C. With 3.3V supply voltage, it's ideal for industrial applications requiring high-speed wireless connectivity in compact form factor (31.4mm x 18mm).
BM23SPKS1NB9-0B02AA
BM23SPKS1NB9-0B02AA by Microchip Technology is a Telecom IC with 43 terminals, operating at -20 to 70°C. It has a rectangular package style, measuring 15mm in width and 29mm in length. Ideal for telecom applications requiring a nominal voltage of 3.7V and terminal pitch of 1.2mm.
XB3-24ACM-J
Digi International
Digi International's XB3-24ACM-J is a TELECOM CIRCUIT with 1 Mbps Data Rate. Operating from -40 to 85 °C, it comes in RECTANGULAR package style. Ideal for telecom interfaces, this IC is designed for various applications requiring high-speed data transmission.
MAX7044AKA+T
Analog Devices
MAX7044AKA+T by Analog Devices is a CMOS telecom IC with 8 terminals, operating at temperatures from -40 to 125°C. It has a supply voltage of 2.7V and low power consumption of 0.0257mA, making it ideal for automotive applications requiring small outline packages and surface mount technology.
BLUENRG-232
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
NRF52840-QIAA
Nordic Semiconductor Asa
NRF52840-QIAA by Nordic Semiconductor Asa is a 73-terminal IC with 3V supply voltage, operating from -40 to 85°C. It features a grid array package style, suitable for industrial telecom circuits. With a 0.5mm terminal pitch and 0.85mm seated height, it offers high performance in compact applications.
CC2592RGVT
CC2592RGVT by Texas Instruments is a Telecom IC with 16 terminals in a square chip carrier package. It operates b/w -40 to 125°C, suitable for automotive applications. With a nominal voltage of 3V and terminal pitch of 0.65mm, it is ideal for telecom circuit interfaces requiring surface mount technology.
EFR32BG22C224F512GN32-C
TELECOM CIRCUIT; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 2; Terminal Finish: NICKEL PALLADIUM GOLD; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI4463-C2A-GMR
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
SI4432-B1-FMR
SI4432-B1-FMR by Silicon Labs is a 20-terminal telecom IC with a square shape and chip carrier package. Operating b/w -40 to 85°C, it has a nominal voltage of 3V. Ideal for industrial applications requiring a very thin profile and no-lead terminal form.
SI4460-C2A-GMR
SI4461-C2A-GMR
SI4460-C2A-GM
SI4432-B1-FM
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE;
SI4463-C2A-GM
SI4455-B1A-FMR
SI4455-B1A-FMR by Silicon Labs is a 20-terminal SQUARE chip carrier with matte tin finish. Operating b/w -40 to 85 °C, it's an industrial-grade telecom circuit IC with a 3.3V supply voltage. With a compact size of 3x3mm and terminal pitch of 0.5mm, it's ideal for telecom interface applications.
SI4455-C2A-GMR
SI4455-C2A-GMR by Silicon Labs is a 20-terminal telecom IC with 3.3V supply voltage, -40 to 85°C operating temp range, and 0.5mm terminal pitch. It's a square chip carrier suitable for industrial applications requiring very thin profile components.
SI4438-B1C-FMR
SI4438-B1C-FMR by Silicon Labs is a 20-terminal chip carrier with matte tin finish. Operating from -40 to 85°C, it's a telecom circuit IC with 3.3V supply voltage and quad terminal position. Ideal for industrial applications due to its very thin profile and square package shape.
SI4431-B1-FM
SI4432-V2-FMR
Seiko Instruments Usa
Ablic
SI4455-B1A-FM
SI4438-C2A-GM
SI4431-B1-FMR
SI4455-C2A-GM
SI4421-ICCC16
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
SI4438-BXX-FM
SI4438-B1C-FM
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved