Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI4438-B1C-FMR by Silicon Labs is a 20-terminal chip carrier with matte tin finish. Operating from -40 to 85°C, it's a telecom circuit IC with 3.3V supply voltage and quad terminal position. Ideal for industrial applications due to its very thin profile and square package shape.
Median Price
$2.650
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Arrow
1+ parts
$0.809
100+ parts
$0.762
1k+ parts
$0.727
10k+ parts
$0.703
Chip1Stop
$4.590
-
DigiKey
Flip Electronics (Authorized)
Verical
Nova Conductors
$3.910
Digiode
$4.360
Flip Electronics
Vyrian
Argo Parts USA
Continental Prestige Electronics
$3.832
Netroflash
Corphita
$4.131
Ampacity Inc.
$8.490
Authorized Procurement Solutions
Kepictronics
Lixinc
S.R.D Solutions
iodParts Technologies Inc.
GreenTree Electronics
Surface mount technology allows for easy and efficient assembly onto printed circuit boards, saving time and reducing production costs.
Designed to withstand industrial operating conditions, ensuring reliability and durability in harsh environments.
Operates at a standard voltage level, compatible with many existing telecom systems and components.
Can withstand high temperature environments, suitable for telecom applications that may experience heat buildup.
Other Function Telecom Interface ICs SI4438-B1C-FMR attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
SI4438-B1C-FMR Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - PB-1406191 19/Jun/2014 PB-1412051 05/Dec/2014
PCN Assembly/Origin - Site Change 18/Jan/2022
PCN Packaging - Labeling Change 14/Dec/2021 Mult Dev Label Chgs 20/Oct/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
FDD5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
Cheng-yi Electronic
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
EQCO30R5.D
Microchip Technology's EQCO30R5.D is a telecom IC with 16 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. With a nominal voltage of 3.3V, it features nickel palladium gold terminal finish and very thin profile design for telecom circuit applications.
BMD-340-A-R-00
U-blox Ag
BMD-340-A-R-00 by U-blox Ag is a surface mount telecom interface IC with 1 function. It has a rectangular package shape, 68 terminals, and a max seated height of 1.9 mm. With a data rate of 2 Mbps, it is suitable for industrial applications requiring reliable communication at temperatures ranging from -40 to 85 °C.
BGT24MR2E6327XUMA1
Infineon Technologies
BGT24MR2E6327XUMA1 by Infineon is a Telecom IC with 32 terminals in a rectangular chip carrier package. Operating temperature ranges from -40 to 105°C, suitable for industrial use. It operates at 3.3V and features a thin profile design for telecom circuit applications.
NEO-M9N-00B
NEO-M9N-00B by U-blox Ag is a GNSS Module with 24 terminals, operating at -40 to 85°C. It has a data rate of 12 Mbps and operates at 3V supply voltage. This surface-mount module in rectangular shape is ideal for telecom applications requiring precise positioning.
EC21AFA-512-STD
Quectel Wireless Solutions
Quectel Wireless Solutions EC21AFA-512-STD is a RECTANGULAR MICROELECTRONIC ASSEMBLY with -40 to 85 °C operating temp range. It features QUAD terminals, 29mm width, and 3.8V supply voltage. Ideal for INDUSTRIAL telecom applications due to its compact size and high temperature tolerance.
NRF51822-CDAB-R
Nordic Semiconductor Asa
NRF51822-CDAB-R by Nordic Semiconductor Asa is a telecom IC with 56 terminals in a rectangular package. It operates b/w -25°C to 75°C, with a nominal voltage of 1.8V. The package style is grid array, very thin profile, fine pitch, making it suitable for various telecom circuit applications.
EQCO30T5.2
EQCO30T5.2 by Microchip Technology is a telecom IC with 16 terminals in a square chip carrier package. Operating temperature range from -40 to 85°C, suitable for industrial use. Features include 3.3V supply voltage, no-lead terminal form, and nickel palladium gold finish for telecom circuit applications.
RN42N-I/RM
RN42N-I/RM by Microchip Technology is a telecom IC with 35 terminals, operating temperature range of -40 to 85°C, and data rate of 3 Mbps. It is a surface mount device suitable for industrial applications requiring a nominal voltage of 3.3V.
CC2640R2FRHBT
Texas Instruments CC2640R2FRHBT is a 32-terminal telecom IC with 3V supply voltage. Operating b/w -40 to 85°C, it features nickel palladium gold finish and quad terminal position. Ideal for telecom circuits, this chip carrier has a very thin profile and is suitable for industrial applications.
RN4871-I/RM140
RN4871-I/RM140 by Microchip Technology is a telecom IC with 16 terminals, operating at -40 to 85°C. It has a data rate of 0.01 Mbps and nominal voltage of 3V. Ideal for industrial applications requiring surface mount technology in compact spaces.
ADTR1107ACCZ-R7
ADTR1107ACCZ-R7 by Analog Devices is a 24-terminal telecom IC with a square package style. It operates b/w -40 to 85°C, suitable for industrial use. With a nominal voltage of 5V, it features a thin profile and fine pitch grid array package, making it ideal for telecom circuit applications.
NRF52840-CKAA-R7
NRF52840-CKAA-R7 by Nordic Semiconductor Asa is a 93-terminal GRID ARRAY IC with 2 Mbps data rate, operating from -40 to 85 °C. Ideal for TELECOM CIRCUIT applications due to its low profile and fine pitch design.
NORA-B101-00B
TELECOM CIRCUIT;
MAX3946ETG+T
MAX3946ETG+T by Analog Devices is a 24-terminal telecom IC with 3.3V supply voltage, operating from -40 to 95°C. It features a square chip carrier package style, matte tin finish, and industrial temperature grade. Ideal for telecom circuits, it has a terminal pitch of 0.5mm and no-lead terminal form.
CYBLE-416045-02
CYBLE-416045-02 by Infineon Technologies is a telecom IC with 43 terminals, operating at -40 to 85°C. It has a data rate of 8000 Mbps and operates at a nominal voltage of 3V. This surface-mount IC is ideal for industrial applications requiring high-speed telecommunications interfaces.
MIA-M10C-00B
GNSS Module;
SA602AD,602
NXP Semiconductors
SA602AD,602 by NXP Semiconductors is an 8-terminal telecom IC with a supply voltage of 6V. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package style. Ideal for telecom circuits, it features gull wing terminals and is surface mountable.
ST60-SIPT
Laird Technologies
ST60-SIPT by Laird Technologies is a surface mount telecom IC with 84 terminals. Operating temp range: -30 to 85°C. Data rate: 866.7 Mbps, suitable for telecom circuit applications due to its compact rectangular package style and low nominal voltage of 3.3V.
MAX2771ETI+
Analog Devices' MAX2771ETI+ is a BICMOS telecom IC with 28 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial applications. With a nominal voltage of 2.85V, it's ideal for telecom circuit interfaces requiring precise temperature control.
CC1175RHBR
CC1175RHBR by Texas Instruments is a telecom IC with 32 terminals, operating at -40 to 85°C. It has a supply voltage of 2.5/3.3V and data rate of 0.2 Mbps, suitable for industrial applications requiring a compact chip carrier package with surface mount capability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI4463-C2A-GMR
Silicon Labs
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
SI4432-B1-FMR
SI4432-B1-FMR by Silicon Labs is a 20-terminal telecom IC with a square shape and chip carrier package. Operating b/w -40 to 85°C, it has a nominal voltage of 3V. Ideal for industrial applications requiring a very thin profile and no-lead terminal form.
SI4460-C2A-GMR
SI4461-C2A-GMR
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL;
SI4460-C2A-GM
SI4432-B1-FM
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE;
SI4463-C2A-GM
SI4455-B1A-FMR
SI4455-B1A-FMR by Silicon Labs is a 20-terminal SQUARE chip carrier with matte tin finish. Operating b/w -40 to 85 °C, it's an industrial-grade telecom circuit IC with a 3.3V supply voltage. With a compact size of 3x3mm and terminal pitch of 0.5mm, it's ideal for telecom interface applications.
SI4455-C2A-GMR
SI4455-C2A-GMR by Silicon Labs is a 20-terminal telecom IC with 3.3V supply voltage, -40 to 85°C operating temp range, and 0.5mm terminal pitch. It's a square chip carrier suitable for industrial applications requiring very thin profile components.
SI4461-C2A-GM
SI4431-B1-FM
SI4432-V2-FMR
Seiko Instruments Usa
Ablic
SI4455-B1A-FM
SI4438-C2A-GM
SI4431-B1-FMR
SI4455-C2A-GM
SI4438-BXX-FMR
SI4438-BXX-FM
SI4438-B1C-FM
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved