Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI4431-B1-FM by Silicon Labs is a 20-terminal IC with square shape, suitable for telecom circuits. Operating from -40 to 85°C, it has a nominal voltage of 3V and terminal pitch of 0.5mm. With a compact size of 4x4mm and low seated height of 0.9mm, it's ideal for industrial applications.
Median Price
$10.975
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Farnell
1+ parts
$9.620
100+ parts
$7.140
1k+ parts
$6.800
10k+ parts
-
DigiKey
$10.800
$7.954
$6.950
$6.793
Newark
$11.150
$8.470
$7.480
Element14
$15.900
$11.780
$10.640
Digiode
$6.897
Vyrian
$7.260
Bristol Electronics
$10.830
$5.090
$4.873
Chip Stock
Nova Conductors
Dan-Mar Components
LWI Electronics Inc
Goldney Electronics S.L.
J2 Sourcing AB
Corohmni
$5.640
Advanced Electronics
Ampacity Inc.
$6.170
Semicontronic
$6.016
$5.985
Corphita
$6.534
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Allows for easy and efficient PCB assembly, saving time and costs.
Square package shape allows for efficient use of space on the PCB.
Sufficient number of terminals for connecting to other components or peripherals.
Can withstand higher operating temperatures, suitable for industrial applications.
Can operate in extremely low temperatures, providing versatility in different environments.
Quad terminal position allows for secure and reliable connections.
Compact width allows for efficient use of space on the PCB.
Compact length allows for efficient placement on the PCB.
Industrial temperature grade ensures reliability in harsh operating conditions.
Compatible with commonly used supply voltages in telecom applications.
Fine terminal pitch allows for dense packaging and integration in compact designs.
Other Function Telecom Interface ICs SI4431-B1-FM attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
SI4431-B1-FM Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - SI403y-B1-FM/SI443y-B1-FM Datasheet 22/Nov/2023
PCN Assembly/Origin - Mult Dev Foundry Site Add 13/Jul/2017
PCN Packaging - IC/SIP MOQ Chg 11/Jan/2022 Labeling Change 14/Dec/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1554216004
Molex
WIRE AND CABLE;
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
General Diode
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
SIM800C
Simcom Wireless Solutions
SIM800C by Simcom Wireless Solutions is a telecom IC with 0.0856 Mbps data rate. It operates in industrial temperature range (-40 to 85 °C) and has 42 terminals in a rectangular package. Ideal for IoT, M2M, and GSM applications due to its surface mount capability and quad terminal position.
ZED-F9R-01B
U-blox Ag
TELECOM CIRCUIT; Peak Reflow Temperature (C): 245; Moisture Sensitivity Level (MSL): 4;
MGM240SA22VNA2
Silicon Labs
TELECOM CIRCUIT;
MGC3030-I/SS
Microchip Technology
MGC3030-I/SS by Microchip is a telecom IC with 28 terminals, operating from -40 to 85°C. It has a small outline package, matte tin finish, and nominal voltage of 3.3V. Ideal for telecom circuits, it features gull wing terminals and is suitable for industrial temperature grades.
14450R-500
Echelon
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: QCCN; Package Shape: SQUARE;
BMD-350-A-R-00
BMD-350-A-R-00 by U-blox Ag is a telecom IC with 47 terminals, operating at -40 to 85°C. It has a data rate of 2 Mbps and nominal voltage of 3V. This surface-mount IC in rectangular package is ideal for industrial applications requiring high-speed telecom circuit integration.
NRF51822-CFAC-R
Nordic Semiconductor Asa
NRF51822-CFAC-R by Nordic Semiconductor Asa is a telecom IC with 62 terminals in a square package. It operates b/w -25°C to 75°C, with a supply voltage of 1.8V. Ideal for applications requiring fine pitch and thin profile grid array packages.
BLUENRG-MSCSP
STMicroelectronics
BLUENRG-MSCSP by STMicroelectronics is a telecom IC with 34 terminals, operating at -40 to 85°C. Its grid array package has a very thin profile and fine pitch, suitable for industrial applications requiring a 3V supply voltage. The IC is designed for surface mount assembly in compact devices due to its small dimensions of 2.56mm width and 2.66mm length.
AD630JN/+
Analog Devices
Analog Devices' AD630JN/+ is a bipolar technology IC with +-15V power supplies, 20 terminals, and 70°C max operating temp. Ideal for telecom interfaces, it features PLASTIC/EPOXY body material in an IN-LINE package style for commercial applications.
MAX7042ATJ
Analog Devices' MAX7042ATJ is a telecom IC with 32 terminals, operating at -40 to 125 °C. It has a supply voltage of 3/5 V and consumes 0.0086 mA current. This CMOS technology chip carrier is ideal for automotive applications due to its low profile and quad terminal position.
DWM3001CTR13
Qorvo
NRF51822-QFAB-R7
NRF51822-QFAB-R7 by Nordic Semiconductor Asa is a 48-terminal telecom IC with a 1.8V supply voltage, operating b/w -25°C to 75°C. It features a square chip carrier package style and quad terminal position, suitable for telecom circuit applications requiring a very thin profile design.
RS9116W-DB00-CC1-X23
Silicon Labs RS9116W-DB00-CC1-X23 is a telecom IC with 107 terminals, operating from -40 to 85°C. It has a nominal voltage of 1.85V and is designed for industrial applications requiring a surface-mount grid array package shape.
BLUENRG-M0A
BLUENRG-M0A by STMicroelectronics is a telecom IC with 11 terminals, operating b/w -40 to 85°C. It has a supply voltage of 3.3V and terminal pitch of 1.27mm, suitable for industrial applications requiring low power consumption and compact design in surface-mount assemblies.
SA612AN
SA612AN by NXP Semiconductors is an 8-terminal telecom IC with a nominal voltage of 6V. It operates in industrial temperature range (-40 to 85°C) and has a peak reflow temperature of 250°C. With through-hole terminal form, it's ideal for telecom circuit applications due to its compact rectangular package style.
RN4871-V/RM140
RN4871-V/RM140 by Microchip Technology is a surface mount telecom IC with 16 terminals. It operates at temperatures ranging from -20 to 70 °C and has a data rate of 0.01 Mbps. It is commonly used in telecom circuits for various applications.
MRF24WB0MA/RM
MRF24WB0MA/RM by Microchip: 3.3V supply, 36 terminals, telecom IC for commercial use. Rectangular package, surface mountable. Ideal for telecom circuit applications in temperatures from 0 to 70°C.
AD9671KBCZ
AD9671KBCZ by Analog Devices is a 144-terminal GRID ARRAY IC with low profile and fine pitch. Operating b/w 0-85°C, it has a supply voltage of 1.4V and terminal pitch of 0.8mm. Ideal for telecom circuits, its package is made of PLASTIC/EPOXY and is surface mountable for various applications.
SA636DK/01
SA636DK/01 by NXP Semiconductors is a telecom interface IC with 20 terminals in a small outline package. It operates b/w -40 to 85°C, suitable for industrial use. With a nominal voltage of 3V, it features gull wing terminals and is designed for telecom circuit applications.
LMH0384SQ/NOPB
Other Telecom ICs; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: QCCN; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI4463-C2A-GMR
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
SI4432-B1-FMR
SI4432-B1-FMR by Silicon Labs is a 20-terminal telecom IC with a square shape and chip carrier package. Operating b/w -40 to 85°C, it has a nominal voltage of 3V. Ideal for industrial applications requiring a very thin profile and no-lead terminal form.
SI4460-C2A-GMR
SI4461-C2A-GMR
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL;
SI4460-C2A-GM
SI4432-B1-FM
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE;
SI4463-C2A-GM
SI4455-B1A-FMR
SI4455-B1A-FMR by Silicon Labs is a 20-terminal SQUARE chip carrier with matte tin finish. Operating b/w -40 to 85 °C, it's an industrial-grade telecom circuit IC with a 3.3V supply voltage. With a compact size of 3x3mm and terminal pitch of 0.5mm, it's ideal for telecom interface applications.
SI4455-C2A-GMR
SI4455-C2A-GMR by Silicon Labs is a 20-terminal telecom IC with 3.3V supply voltage, -40 to 85°C operating temp range, and 0.5mm terminal pitch. It's a square chip carrier suitable for industrial applications requiring very thin profile components.
SI4461-C2A-GM
SI4438-B1C-FMR
SI4438-B1C-FMR by Silicon Labs is a 20-terminal chip carrier with matte tin finish. Operating from -40 to 85°C, it's a telecom circuit IC with 3.3V supply voltage and quad terminal position. Ideal for industrial applications due to its very thin profile and square package shape.
SI4432-V2-FMR
Seiko Instruments Usa
Ablic
SI4455-B1A-FM
SI4438-C2A-GM
SI4431-B1-FMR
SI4455-C2A-GM
SI4438-B1C-FM
SI4432-V2-FM
SI4438-C2A-GMR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved