Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI4432-B1-FM by Silicon Labs is a 20-terminal telecom IC with a 3V supply voltage. It operates b/w -40 to 85°C, in industrial settings. This square chip carrier has a 0.5mm terminal pitch and is ideal for telecom circuit applications due to its compact size and surface-mount capability.
Median Price
$11.805
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$8.510
1k+ parts
$7.309
10k+ parts
-
Verical
DigiKey
$11.990
$8.846
$7.736
Nova Conductors
$6.440
Digiode
$9.664
Chip Stock
Prism Electronics
Vyrian
NPI Materials, Inc.
ComSIT Distribution GmbH
Corohmni
$6.258
Aranea Global
$6.311
$6.059
Continental Prestige Electronics
Ampacity Inc.
$8.650
Corphita
$9.156
Aztec Data Supply Inc.
$10.850
Advanced Electronics
$17.637
$16.050
$14.462
Argo Parts USA
S.R.D Solutions
Authorized Procurement Solutions
Kepictronics
Allows for easy and convenient installation on circuit boards, saving time and effort.
Provides a compact design for efficient use of space on the circuit board.
Offers multiple connections for versatile integration with other components.
Ensures reliable operation even in high temperature environments.
Allows for use in various weather conditions and temperatures.
Enables easy connection and orderly arrangement of terminals.
Low profile design is suitable for applications where space is limited.
Compact width aids in fitting the component in small spaces.
Compact length contributes to the overall space-saving design.
Suitable for industrial applications where durability and reliability are crucial.
Compatible with common voltage requirements, making it easy to integrate into existing systems.
Fine pitch terminals allow for precise connections and reduce the risk of shorts or errors.
Other Function Telecom Interface ICs SI4432-B1-FM attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
SI4432-B1-FM Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - SI403y-B1-FM/SI443y-B1-FM Datasheet 22/Nov/2023
PCN Assembly/Origin - Mult Dev Foundry Site Add 13/Jul/2017
PCN Packaging - IC/SIP MOQ Chg 11/Jan/2022 Labeling Change 14/Dec/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Hy Electronic
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
SIM7020E
Simcom Wireless Solutions
SIM7020E by Simcom Wireless Solutions is a telecom IC with 42 terminals, operating from -40 to 85°C. It has a data rate of 0.0625 Mbps and nominal voltage of 3V. Ideal for industrial applications requiring low-power telecom circuitry in compact microelectronic assemblies.
TDA5210XUMA1
Infineon Technologies
TDA5210XUMA1 by Infineon is a telecom IC with 28 terminals, operating from -40 to 105°C. It features a small outline package style, tin terminal finish, and 5V supply voltage. Ideal for telecom circuits, it has a rectangular shape and thin profile suitable for industrial applications.
NEO-M8P-0-11
U-blox Ag
NEO-M8P-0-11 by U-blox Ag is a telecom IC with 24 terminals, operating temperature range of -40 to 85 °C. It has AEC-Q100 screening level and TS 16949 certification. Ideal for industrial applications requiring precise positioning and communication capabilities.
SA602AD,602
SA602AD,602 by NXP Semiconductors is an 8-terminal telecom IC with a supply voltage of 6V. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package style. Ideal for telecom circuits, it features gull wing terminals and is surface mountable.
ESP32-WROOM-32U
Espressif Systems (Shanghai)
ESP32-WROOM-32U by Espressif Systems (Shanghai) is a surface-mount telecom IC with 38 terminals. It operates in industrial temperature range (-40 to 85°C) and has a nominal voltage of 3.3V. This rectangular microelectronic assembly, with no lead terminal form, is ideal for telecom circuit applications due to its compact size (18mm x 19.2mm) and high peak reflow temperature (260°C).
AD9363ABCZ
Analog Devices
AD9363ABCZ by Analog Devices is a telecom IC with 144 terminals in a grid array package. It operates b/w -40 to 85°C, with a supply voltage of 1.3V. Ideal for telecom circuits, it features a low profile design and ball terminal form.
F2480NBGI8
Renesas Electronics
TELECOM CIRCUIT; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Terminal Finish: Tin (Sn);
WT12-A-AI3
Silicon Labs
Silicon Labs' WT12-A-AI3 is a telecom IC with 31 terminals, CMOS technology, and 3 Mbps data rate. It operates in industrial temperature range (-40 to 85°C) and requires a nominal voltage of 3.3V. This surface-mount rectangular package (14x25 mm) is ideal for telecom interface applications.
TSC2000IPWRG4
TSC2000IPWRG4 by Texas Instruments is a Telecom Interface IC with 20 terminals in a small outline package. Operating temperature range from -40 to 85°C, suitable for industrial use. Features CMOS technology, single-ended input type, and nominal voltage of 2.7V for telecom circuit applications.
XB3-24Z8PT-J
Digi International
XB3-24Z8PT-J by Digi Int. is a telecom IC with 20 terminals in MICROELECTRONIC ASSEMBLY package. Operating temp range -40 to 85°C, INDUSTRIAL grade. Ideal for TELECOM CIRCUIT applications due to THROUGH-HOLE terminal form and DUAL position.
NRF51822-QFAC-R7
Nordic Semiconductor Asa
NRF51822-QFAC-R7 by Nordic Semiconductor Asa is a 48-terminal telecom IC with 1.8V supply voltage, operating from -25 to 75°C. It features a square chip carrier package style and quad terminal position, suitable for telecom circuit applications requiring a very thin profile design.
ANNA-B112-01B
ANNA-B112-01B by U-blox Ag is a telecom IC with 52 terminals, operating at -40 to 85°C. It has a compact square package style, suitable for industrial applications. With a supply voltage of 3V and no lead terminal form, it's ideal for telecom interface functions.
TDA7116FHTMA1
TDA7116FHTMA1 by Infineon is a telecom IC with 10 terminals, operating from -40 to 85°C. It has a small outline package style, matte tin finish, and dual terminal position. This IC is suitable for telecom circuits requiring a nominal voltage of 3V in industrial temperature environments.
SA636DK/01
SA636DK/01 by NXP Semiconductors is a telecom interface IC with 20 terminals in a small outline package. It operates b/w -40 to 85°C, suitable for industrial use. With a nominal voltage of 3V, it features gull wing terminals and is designed for telecom circuit applications.
TM266DVA1
Pulser
TELECOM CIRCUIT; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;
ESP-WROOM-02
ESP-WROOM-02 by Espressif Systems is a telecom IC with 18 terminals, operating at -40 to 85°C. It has a supply voltage of 3.3V and peak reflow temp of 250°C. Ideal for industrial applications requiring compact MICROELECTRONIC ASSEMBLY with TELECOM CIRCUIT functionality.
MGM240PA32VNA3R
TELECOM CIRCUIT;
MRF24WB0MA/RM
Microchip Technology
MRF24WB0MA/RM by Microchip: 3.3V supply, 36 terminals, telecom IC for commercial use. Rectangular package, surface mountable. Ideal for telecom circuit applications in temperatures from 0 to 70°C.
BGT24MTR12E6327XUMA1
BGT24MTR12E6327XUMA1 by Infineon is a telecom IC with 32 terminals in a chip carrier package. It operates b/w -40 to 105°C, suitable for industrial use. With a supply voltage of 3.3V, it features a terminal pitch of 0.5mm and is surface mountable for various telecom interface applications.
SA638
Other Telecom ICs; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI4463-C2A-GMR
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
SI4432-B1-FMR
SI4432-B1-FMR by Silicon Labs is a 20-terminal telecom IC with a square shape and chip carrier package. Operating b/w -40 to 85°C, it has a nominal voltage of 3V. Ideal for industrial applications requiring a very thin profile and no-lead terminal form.
SI4460-C2A-GMR
SI4461-C2A-GMR
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL;
SI4460-C2A-GM
SI4463-C2A-GM
SI4455-B1A-FMR
SI4455-B1A-FMR by Silicon Labs is a 20-terminal SQUARE chip carrier with matte tin finish. Operating b/w -40 to 85 °C, it's an industrial-grade telecom circuit IC with a 3.3V supply voltage. With a compact size of 3x3mm and terminal pitch of 0.5mm, it's ideal for telecom interface applications.
SI4455-C2A-GMR
SI4455-C2A-GMR by Silicon Labs is a 20-terminal telecom IC with 3.3V supply voltage, -40 to 85°C operating temp range, and 0.5mm terminal pitch. It's a square chip carrier suitable for industrial applications requiring very thin profile components.
SI4461-C2A-GM
SI4438-B1C-FMR
SI4438-B1C-FMR by Silicon Labs is a 20-terminal chip carrier with matte tin finish. Operating from -40 to 85°C, it's a telecom circuit IC with 3.3V supply voltage and quad terminal position. Ideal for industrial applications due to its very thin profile and square package shape.
SI4431-B1-FM
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE;
SI4432-V2-FMR
Seiko Instruments Usa
Ablic
SI4455-B1A-FM
SI4438-C2A-GM
SI4431-B1-FMR
SI4455-C2A-GM
SI4430-B1-FMR
SI4432-V2-FM
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved