Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NVMFS5C450NLAFT1G by Onsemi is a Power FET with 40V DS Breakdown Voltage, 110A Drain Current, and 0.0044 ohm On Resistance. Ideal for automotive applications due to AEC-Q101 standard compliance and 175 °C operating temperature range. Suitable for power management in vehicles requiring high current handling capabilities.
Median Price
$1.723
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$2.470
100+ parts
$1.090
1k+ parts
$0.871
10k+ parts
$0.845
DigiKey
$1.086
$0.702
Arrow
-
$0.976
Verical
$0.716
Digiode
Vyrian
Microchip USA
$5.611
iodParts Technologies Inc.
Component Connect
Perfect Parts
Kepictronics
Authorized Procurement Solutions
Kulean Microsystems
Problanco Electronics
TANS Electronics
Corphita
SupplyDigital Components
Alle Elektronik GmbH
UHIMA Technologies
Corohmni
The use of plastic/epoxy material for the package body provides good insulation and protection for the internal components, ensuring reliability and durability.
N-channel FETs have better performance characteristics compared to P-channel FETs, making them a preferred choice for many power applications.
Having a built-in diode simplifies circuit design and reduces the need for additional components, making the overall system more compact and efficient.
Surface mount technology allows for easy and convenient PCB assembly, saving time and effort during production.
Having a minimum breakdown voltage of 40V ensures that the FET can handle high voltage applications without risk of failure.
With a high pulsed drain current rating of 740A, this FET can handle large surge currents, making it suitable for high-power applications.
The high power dissipation rating of 68W ensures the FET can operate at high power levels without overheating, maintaining reliability.
The high operating temperature of 175 °C allows the FET to be used in demanding thermal environments, increasing its versatility.
The low on-resistance of 0.0044 ohm results in minimal power loss and efficient power conversion, making the FET suitable for high-efficiency applications.
Power Field Effect Transistors (FET) NVMFS5C450NLAFT1G attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
Maximum Feedback Capacitance (Crss):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Reference Standard:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Element Material:
NVMFS5C450NLAFT1G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Dev Wafer Fab Chg 8/Jan/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Taitron Components
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Electronic Transistors
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Hitachi
IRLML6401
International Rectifier
IRLML6401 by International Rectifier is a P-CHANNEL FET with 12V DS Breakdown Voltage and 34A IDM. Ideal for SWITCHING applications, it features a built-in diode, 33mJ EAS rating, and -55 to 150 °C operating temperature range.
NVTFS5116PLTWG
NVTFS5116PLTWG by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, 126A IDM, and 0.072 ohm RDS(ON). It is used in power applications requiring high drain current handling capabilities.
FQD3P50TM
FQD3P50TM by Onsemi is a P-CHANNEL Power FET with 500V DS Breakdown Voltage, ideal for SWITCHING applications. It features 8.4A Max Pulsed Drain Current, 250mJ Avalanche Energy Rating, and 4.9 ohm Max Drain-Source Resistance. This ENHANCEMENT MODE transistor operates at up to 150°C and has a compact SMALL OUTLINE package style for efficient power dissipation.
FDS8984
FDS8984 by Onsemi is a N-CHANNEL Power FET with 30V DS Breakdown Voltage and 32mJ Avalanche Energy Rating. Ideal for SWITCHING applications, it features a SEPARATE configuration with 2 ELEMENTS and BUILT-IN DIODE. This small outline transistor has a max operating temperature of 150°C and can handle up to 30A pulsed drain current.
BSP170PH6327XTSA1
Infineon Technologies
Infineon's BSP170PH6327XTSA1 is a P-CHANNEL FET with 60V DS Breakdown Voltage, 7.6A IDM, and 0.3 ohm RDS(on). Ideal for automotive applications due to AEC-Q101 standard compliance and 150°C max operating temp.
AUIRF3205Z
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 170 W; Maximum Operating Temperature: 175 Cel; Maximum Pulsed Drain Current (IDM): 440 A;
FDD4243-G
Power Field-Effect Transistors; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
CSD18531Q5AT
CSD18531Q5AT by Texas Instruments is a N-CHANNEL FET for SWITCHING applications. It has a 60V DS Breakdown Voltage, 19A Drain Current, and 0.0058 ohm On Resistance. With an operating range of -55 to 150 °C, it's ideal for power management in various electronic devices.
IRF5305PBF
IRF5305PBF by Infineon is a P-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. It features 110A IDM and 0.06 ohm RDS(ON), suitable for high-power circuits. With a max power dissipation of 110W and operating temperature up to 175°C, it ensures reliable performance in various environments.
NDT452AP
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Maximum Pulsed Drain Current (IDM): 15 A; Package Body Material: PLASTIC/EPOXY;
2N7002T
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Maximum Drain Current (Abs) (ID): .3 A; No. of Elements: 1;
IRF530PBF-BE3
Power Field-Effect Transistors;
AUIRFZ44NS
AUIRFZ44NS by Infineon is a N-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 160A IDM, 150mJ EAS, and 0.0175 ohm RDS(ON). With a max power dissipation of 94W and operating temperature up to 175°C, it's suitable for high-power circuits.
IRLML6402TR
IRLML6402TR by International Rectifier is a P-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features 22A IDM and 0.065 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 150°C. This surface-mount transistor has a built-in diode, making it suitable for various power management tasks.
DMG6602SVT-7
Diodes Incorporated
DMG6602SVT-7 by Diodes Inc. is a Power FET with N/P-channel, 30V DS breakdown voltage, and 0.06 ohm max RDS(on). Ideal for switching applications, it features 2 elements in separate configuration with built-in diode. With 13A IDM and small outline package style, it operates at up to 150°C.
IRF7103TRPBF
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Package Body Material: PLASTIC/EPOXY; Additional Features: LOGIC LEVEL COMPATIBLE;
SI4946BEY-T1-E3
Vishay Siliconix
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3.7 W; Maximum Drain-Source On Resistance: .041 ohm; JESD-30 Code: R-PDSO-G8;
IXTK3N250L
Littelfuse
IXTK3N250L by Littelfuse is a N-CHANNEL FET with 2500V DS Breakdown Voltage, ideal for AMPLIFIER applications. It features 8A IDM, 417W Abs Power Dissipation, and operates in ENHANCEMENT MODE. With a max operating temperature of 150°C and -55°C min, it offers reliable performance in various environments.
FDD4243_F085
Fairchild Semiconductor
Fairchild Semiconductor's FDD4243_F085 is a P-CHANNEL Power FET with 40V DS Breakdown Voltage, 24A Drain Current, and 0.044 ohm On Resistance. Ideal for SWITCHING applications in automotive (AEC-Q101) and industrial sectors due to its high power dissipation of 42W and wide operating temperature range (-55 to 175 °C).
2N7000
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Operating Temperature: 150 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NVMFS5C604NLAFT1G
NVMFS5C604NLAFT1G by Onsemi is a Power FET with 60V DS Breakdown Voltage, 900A IDM, and 0.0017 ohm RDS(on). Ideal for automotive applications due to AEC-Q101 standard compliance.
NVMFS5113PLT1G
NVMFS5113PLT1G by Onsemi is a P-CHANNEL power FET with a min DS breakdown voltage of 60V. It has a max pulsed drain current of 415A and an avalanche energy rating of 315mJ. This transistor is commonly used in automotive applications due to its AEC-Q101 reference standard and moisture sensitivity level of MSL1.
NVMFD5C650NLWFT1G
NVMFD5C650NLWFT1G by Onsemi is a Power FET with 60V DS Breakdown Voltage, 502A IDM, and 0.0058 ohm RDS(on). Ideal for automotive applications due to AEC-Q101 standard compliance. Enhances performance in power management systems with its high current handling capabilities.
NVMFD6H846NLWFT1G
NVMFD6H846NLWFT1G by Onsemi is an N-CHANNEL Power FET with 80V DS Breakdown Voltage and 114A Pulsed Drain Current. Ideal for automotive applications due to AEC-Q101 standard compliance, it features a small outline package style and operates in enhancement mode with -55°C to 175°C temperature range.
NVMFS6H800NT1G
NVMFS6H800NT1G by Onsemi is a Power FET with 80V DS Breakdown Voltage, 203A Drain Current, and 0.0021 ohm On Resistance. It is used in applications requiring high power dissipation and operates in temperatures ranging from -55 to 175 °C. Ideal for automotive and industrial sectors due to AEC-Q101 standard compliance.
NVMFS5C604NLWFAFT1G
NVMFS5C604NLWFAFT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage, 900A IDM, and 0.0017 ohm RDS(on). Ideal for power applications in automotive electronics due to AEC-Q101 standard compliance.
NVMFS5A140PLZWFT1G
NVMFS5A140PLZWFT1G by Onsemi is a P-CHANNEL FET with 40V DS Breakdown Voltage, 560A IDM, and 420mJ EAS. Ideal for power applications in automotive industry due to AEC-Q101 compliance and high drain current capacity.
NVMFS5C404NLAFT1G
NVMFS5C404NLAFT1G by Onsemi is a power FET with N-channel polarity, 40V DS breakdown voltage, and 370A max drain current. It is commonly used in applications requiring high power dissipation and temperature resistance, such as automotive electronics or industrial equipment.
NVMFD5C650NLT1G
NVMFD5C650NLT1G by Onsemi is an N-channel Power FET with 60V DS breakdown voltage and 502A max pulsed drain current. It features a separate configuration with built-in diode, suitable for applications requiring high power dissipation such as automotive electronics. Operating in enhancement mode, it offers low on-resistance of 0.0058 ohm and can withstand temperatures from -55 to 175°C.
NVMFS5C410NAFT1G
NVMFS5C410NAFT1G by Onsemi is a Power FET with N-CHANNEL polarity, 40V DS breakdown voltage, and 900A max pulsed drain current. Ideal for applications requiring high power dissipation in small outline packages like automotive electronics due to its 166W max power dissipation and AEC-Q101 reference standard compliance.
NVMFD5C466NLT1G
NVMFD5C466NLT1G by Onsemi is a Power FET with N-CHANNEL polarity, 40V DS breakdown voltage, and 198A max pulsed drain current. Ideal for applications requiring high power dissipation in small outline packages, such as automotive electronics or industrial control systems.
NVMFS5C404NWFAFT1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 200 W; Minimum DS Breakdown Voltage: 40 V; Maximum Feedback Capacitance (Crss): 120 pF;
NVMFS5C442NLWFAFT1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 83 W; Maximum Operating Temperature: 175 Cel; Peak Reflow Temperature (C): 260;
NVMFS5C404NLWFAFT1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 200 W; Maximum Drain Current (ID): 370 A; JESD-30 Code: R-PDSO-F5;
NVMFD5C446NLT1G
NVMFD5C446NLT1G by Onsemi is a Power FET with N-CHANNEL polarity, 40V DS Breakdown Voltage, and 644A Max Pulsed Drain Current. Ideal for automotive applications due to AEC-Q101 standard compliance and 175°C Max Operating Temp.
NVMFS5832NLT1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 127 W; No. of Elements: 1; Terminal Finish: Matte Tin (Sn) - annealed;
NVMFS6H818NWFT1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 136 W; Avalanche Energy Rating (EAS): 731 mJ; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
NVMFS5C404NLWFT1G
NVMFS5C404NLWFT1G by Onsemi is a single N-channel power FET with a max drain current of 352A and a max power dissipation of 200W. It utilizes metal-oxide semiconductor technology and can operate at temperatures up to 175°C. This FET is suitable for various applications requiring high power and efficient switching capabilities.
NVMFS3D6N10MCLT1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 139 W; No. of Elements: 1; No. of Terminals: 5;
NVMFS5113PLWFT1G
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Package Shape: RECTANGULAR; Reference Standard: AEC-Q101;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved