Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NVHL110N65S3F by Onsemi is a N-CHANNEL Power FET with 650V DS Breakdown Voltage. Ideal for SWITCHING applications, it has a max IDM of 69A and EAS of 380mJ. Operating in ENHANCEMENT MODE, it offers 0.11 ohm RDS(on) and can handle up to 240W power dissipation.
Median Price
$7.220
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Farnell
1+ parts
$5.510
100+ parts
$2.850
1k+ parts
$2.420
10k+ parts
-
DigiKey
$7.110
$4.090
$2.938
$2.933
Mouser Electronics
$7.160
$3.510
Newark
$7.280
$4.390
$4.050
Chip1Stop
$19.100
$8.450
Element14
$520.930
$303.700
$291.710
Flip Electronics (Authorized)
Digiode
$2.603
Nova Conductors
$3.454
Chip Stock
Vyrian
Flip Electronics
Ampacity Inc.
$2.150
Corphita
$2.466
Corohmni
$2.680
AZTECH Wire
$3.380
$3.250
$3.180
$3.120
Argo Parts USA
Continental Prestige Electronics
$3.385
Microchip USA
$18.452
Perfect Parts
Infinite Electronics LLP (Excess)
Formix International (Excess)
Lixinc
Authorized Procurement Solutions
RC Electronics
$3.690
$3.360
$3.260
Kulean Microsystems
TANS Electronics
Problanco Electronics
UHIMA Technologies
SupplyDigital Components
iodParts Technologies Inc.
The use of plastic/epoxy material allows for a lightweight and durable packaging, ensuring the product is easy to handle and resistant to damage.
N-channel FETs are commonly used for high power applications due to their lower resistance and better efficiency compared to P-channel FETs.
The built-in diode simplifies circuit design and protects against reverse voltage spikes, making the product more reliable and efficient.
Designed specifically for switching applications, this FET can handle high currents and voltages efficiently, making it ideal for power management tasks.
With a high breakdown voltage of 650 V, this FET can withstand high voltage spikes and surges, ensuring reliable performance in harsh environments.
The high pulsed drain current rating of 69 A allows for handling short bursts of high current, making this FET suitable for demanding applications.
With a maximum operating temperature of 150°C, this FET can operate reliably in high-temperature environments without overheating.
Power Field Effect Transistors (FET) NVHL110N65S3F attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Reference Standard:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
NVHL110N65S3F Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Mult Dev DS/Doc Chgs 1/Oct/2020
PCN Assembly/Origin - Mold Compound Change 24/Sep/2019
PCN Packaging - Packing quantity increase 25/Jun/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Lite-on Semiconductor
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
EU2B-YS3203C
Idec
ROTARY SWITCH;
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002-T1-E3
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
Allegro MicroSystems
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
IRF640
National Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Maximum Drain Current (ID): 18 A; JESD-609 Code: e0;
FDB035N10A
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 333 W; No. of Terminals: 2; Package Style (Meter): SMALL OUTLINE;
IPP120P04P4L03AKSA2
Infineon Technologies
IPP120P04P4L03AKSA2 by Infineon is a P-CHANNEL FET with 40V DS Breakdown Voltage, 480A IDM, and 0.0052 ohm RDS(ON). Ideal for automotive applications due to AEC-Q101 standard compliance and 175°C max operating temp.
FDD4243
The Onsemi FDD4243 is a P-CHANNEL Power FET with 40V DS Breakdown Voltage, 60A IDM, and 0.064 ohm RDS. Ideal for power management applications due to its high current handling capability and low on-resistance. Suitable for use in various electronic devices requiring efficient power control in compact designs.
IRFP460
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Minimum DS Breakdown Voltage: 500 V; JEDEC-95 Code: TO-247;
IRF9530
Vishay Intertechnology's IRF9530 is a P-CHANNEL FET with 100V DS breakdown voltage, ideal for switching applications. It features a max IDM of 48A and EAS of 400mJ, making it suitable for high-power operations. With a max power dissipation of 88W and operating temp up to 150°C, it offers reliable performance in various environments.
IRF540ZPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 91 W; Qualification: Not Qualified; Transistor Element Material: SILICON;
ZVN2110GTA
ZVN2110GTA by Diodes Inc. is a N-CHANNEL power FET with 100V DS breakdown voltage, 6A IDM, and 4 ohm RDS(on). It is used for switching applications in small outline packages.
PSMN5R5-60YS,115
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; No. of Elements: 1;
IRF3710PBF
IRF3710PBF by Infineon is a N-CHANNEL FET with 100V DS Breakdown Voltage and 180A IDM. Ideal for SWITCHING applications, it has a max power dissipation of 200W and operates in ENHANCEMENT MODE at temperatures ranging from -55 to 175°C.
IRFZ44NSTRL
International Rectifier Hirel Products
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-263AB; Qualification: Not Qualified; Package Shape: RECTANGULAR;
IRFR6215TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 110 W; Transistor Element Material: SILICON; Case Connection: DRAIN;
FQA36P15
FQA36P15 by Onsemi is a P-CHANNEL Power FET with 150V DS Breakdown Voltage and 144A IDM. Ideal for SWITCHING applications, it features a single configuration with built-in diode and 0.09 ohm Drain-Source On Resistance. Operating in ENHANCEMENT MODE, this transistor has a max power dissipation of 294W and can handle up to 36A drain current.
IRFP460APBF
Vishay Intertechnology's IRFP460APBF is a N-CHANNEL Power FET with 500V DS Breakdown Voltage and 80A IDM. Ideal for SWITCHING applications, it features a max power dissipation of 280W and operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C.
IRF3205ZSPBF
IRF3205ZSPBF by Infineon is an N-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 440A and EAS of 180mJ, operating in ENHANCEMENT MODE. With a Drain Current of 75A and 0.0065 ohm On Resistance, it offers high power dissipation up to 170W in a SMALL OUTLINE package.
BSZ100N06LS3GXT
Infineon's BSZ100N06LS3GXT is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 80A IDM, 55mJ EAS, and 0.0179 ohm RDS(ON). Operating from -55 to 150 °C, it has a max power dissipation of 50W in a small outline package.
IRF5210PBF
IRF5210PBF by Infineon is a P-CHANNEL FET with 100V DS Breakdown Voltage and 140A IDM. Ideal for SWITCHING applications, it has a max power dissipation of 150W and operates in ENHANCEMENT MODE. With a Drain Current of 40A and 0.06 ohm On Resistance, it offers reliable performance in various electronic systems.
IPZ40N04S5L2R8ATMA1
Infineon's IPZ40N04S5L2R8ATMA1 is a N-CHANNEL FET with 40V DS Breakdown Voltage, 160A IDM, and 0.0038 ohm RDS(ON). Ideal for automotive applications due to AEC-Q101 standard compliance.
IRF7425TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN;
RFD16N05LSM9A
RFD16N05LSM9A by Onsemi is a N-CHANNEL FET with 50V DS breakdown voltage, 16A max drain current, and 0.056 ohm max on resistance. Ideal for switching applications, it operates in enhancement mode with 45A pulsed drain current capability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NVHL055N60S5F
NVHL055N60S5F by Onsemi is a N-CHANNEL Power FET with 600V DS Breakdown Voltage. It is used for SWITCHING applications, featuring a max IDM of 159A and EAS of 417mJ. Operating in ENHANCEMENT MODE, it has a Drain Current of 45A and 0.055ohm RDS(on), suitable for high-power requirements.
NVHL027N65S3F
NVHL027N65S3F by Onsemi is a N-CHANNEL FET with 650V DS Breakdown Voltage, ideal for SWITCHING applications. It features 187.5A IDM and 1610mJ EAS, suitable for high-power operations. With a max power dissipation of 595W and operating temperature range from -55 to 150 °C, it offers reliable performance in various environments.
NVHL080N120SC1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 348 W; Minimum DS Breakdown Voltage: 1200 V; Reference Standard: AEC-Q101;
NVHL020N120SC1
The Onsemi NVHL020N120SC1 is a N-CHANNEL Power FET with 1200V DS Breakdown Voltage. Ideal for SWITCHING applications, it features a Max Pulsed Drain Current of 412A and Avalanche Energy Rating of 264mJ. With a Max Power Dissipation of 535W, this transistor operates in ENHANCEMENT MODE at temperatures ranging from -55 to 175°C.
NVHL080N120SC1A
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 178 W; JESD-609 Code: e3; Transistor Element Material: SILICON CARBIDE;
NVHL060N090SC1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 221 W; Maximum Drain-Source On Resistance: .084 ohm; JESD-609 Code: e3;
NVHL040N65S3
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 417 W; Maximum Pulsed Drain Current (IDM): 162.5 A; JEDEC-95 Code: TO-247;
NVHL072N65S3
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 312 W; JESD-30 Code: R-PSFM-T3; Minimum Operating Temperature: -55 Cel;
NVHL075N065SC1
Power Field-Effect Transistors;
NVHL020N090SC1
NVHL020N090SC1 by Onsemi is a N-CHANNEL Power FET with 900V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 472A and EAS of 264mJ, making it suitable for high-power operations. With an Abs ID of 118A and 0.028 ohm RDS(on), this MOSFET offers efficient performance in various industrial settings.
NVHL025N65S3
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 595 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Finish: Matte Tin (Sn) - annealed;
NVHL040N65S3HF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 446 W; Reference Standard: AEC-Q101; Operating Mode: ENHANCEMENT MODE;
NVHL060N065SC1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 257 W; Package Style (Meter): FLANGE MOUNT; Minimum DS Breakdown Voltage: 650 V;
NVHL040N60S5F
NVHL065N65S3F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 337 W; JESD-30 Code: R-PSFM-T3; JEDEC-95 Code: TO-247;
NVHL025N065SC1
NVHL045N065SC1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 325 W; Minimum DS Breakdown Voltage: 650 V; Minimum Operating Temperature: -55 Cel;
NVHL050N65S3F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 403 W; Package Body Material: PLASTIC/EPOXY; Minimum DS Breakdown Voltage: 650 V;
NVHL040N65S3F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 446 W; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved