Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NTTFS4945NTWG by Onsemi is a N-CHANNEL FET with built-in diode for switching applications. It features a 30V DS breakdown voltage, 7.1A max drain current, and 0.013 ohm max on resistance. This MOSFET has a square package shape, no lead terminals, and operates in enhancement mode.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
AZTECH Wire
$12.710
Component Stockers USA
$99.990
TANS Electronics
Problanco Electronics
SupplyDigital Components
Kulean Microsystems
QUARKTWIN TECHNOLOGY LTD
Corphita
UHIMA Technologies
Corohmni
N-Channel FETs are commonly used in applications where high power efficiency is required, making this product ideal for energy-efficient solutions.
The built-in diode allows for ease of use in circuits requiring reverse polarity protection or inductive kickback protection.
Designed specifically for switching applications, ensuring fast and efficient operation in various electronic circuits.
Surface mount technology allows for easy and compact integration onto circuit boards, saving space and simplifying assembly processes.
With a minimum breakdown voltage of 30V, this FET can handle higher voltage levels and provide robust protection against voltage spikes.
The square package shape provides a convenient form factor for easy mounting and placement on circuit boards.
Metal-Oxide Semiconductor technology offers high performance and reliability in low-power applications, making this FET a reliable choice for various circuits.
The high maximum drain current rating of 7.1A allows for handling of higher current loads, making it suitable for power-intensive applications.
The low on-resistance ensures minimal power loss and efficient conduction, resulting in better performance and energy efficiency.
Small Signal Field Effect Transistors (FET) NTTFS4945NTWG attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Onsemi
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
NTTFS4945NTWG Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Multiple Devices 05/Oct/2010
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
1554216004
Molex
WIRE AND CABLE;
Rectron
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Frontier Electronics
Bytesonic Electronics
Synsemi
STM32H743IIT6
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
Diodes Incorporated
ATMEGA328P-AU
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Rfe International
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BS170FTA
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Terminal Position: DUAL; Minimum DS Breakdown Voltage: 60 V;
FDC604P
Onsemi
FDC604P by Onsemi is a P-CHANNEL small signal FET with a min DS breakdown voltage of 20V. It is used for switching applications and has a max drain current of 5.5A.
NTR4171PT1G
NTR4171PT1G by Onsemi is a P-CHANNEL FET with 30V DS breakdown voltage, 2.2A max drain current, and 0.075 ohm max on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 1.25W at 150°C.
BSS123WQ-7-F
Diodes Inc. BSS123WQ-7-F is a N-channel FET with 100V DS breakdown voltage, 0.17A max drain current, and 6 ohm max on resistance. Ideal for switching applications in small outline packages, it operates from -55 to 150°C with matte tin finish and AEC-Q101 standard compliance.
S-LBSS84LT1G
Leshan Radio
Small Signal Field-Effect Transistors; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
ZXM61N03FTA
ZXM61N03FTA by Diodes Inc. is a N-CHANNEL FET with 30V DS breakdown voltage, 1.4A max drain current, and 0.22 ohm max on resistance. Ideal for switching applications, it operates in enhancement mode with a max temp of 150°C. It comes in a small outline package with gull wing terminals for surface mount assembly.
2N7002K
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Elements: 1;
TN2404K-T1-E3
Vishay Intertechnology
Vishay Intertechnology TN2404K-T1-E3 is a N-CHANNEL FET with 240V DS Breakdown Voltage, 0.2A Drain Current, and 4 ohm On Resistance. Ideal for SWITCHING applications in ENHANCEMENT MODE, it features GULL WING terminals and operates b/w -55 to 150 °C.
MMBF170LT1
MMBF170LT1 by Onsemi is a N-CHANNEL FET with 60V DS breakdown voltage, 0.5A max drain current, and 5 ohm max on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. This small outline transistor has a peak reflow temp of 235°C and can withstand temperatures from -55 to 150°C.
NX3008NBK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum Operating Temperature: -50 Cel; Transistor Element Material: SILICON; Maximum Operating Temperature: 150 Cel;
SI4532CDY-T1-GE3
Vishay Siliconix
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain Current (ID): 6 A; Maximum Drain-Source On Resistance: .047 ohm;
BSS123W
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; No. of Elements: 1;
SI2369DS-T1-GE3
SI2369DS-T1-GE3 by Vishay Intertechnology is a P-CHANNEL FET with 30V DS Breakdown Voltage and 7.6A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with 0.029 ohm On Resistance. This SMALL OUTLINE transistor has a max power dissipation of 2.5W and can withstand temperatures from -55 to 150°C.
BSS139IXTSA1
Infineon Technologies
Small Signal Field-Effect Transistors;
BSS84,215
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; No. of Elements: 1; Package Body Material: PLASTIC/EPOXY;
FDC6305N
FDC6305N by Onsemi is a N-CHANNEL FET with 2 elements and built-in diode, ideal for SWITCHING applications. It features a Max Drain Current of 2.7A, Max Power Dissipation of 0.96W, and Max Operating Temperature of 150°C. This small outline transistor has a rectangular package and operates in ENHANCEMENT MODE.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
2N7002-G
2N7002-G by Microchip Technology is a N-CHANNEL FET with 60V DS Breakdown Voltage. Ideal for SWITCHING applications, it features SINGLE configuration with BUILT-IN DIODE. Operating in ENHANCEMENT MODE, it has 0.115A Drain Current and 7.5 ohm On Resistance.
2N7002L
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE; Terminal Finish: TIN LEAD;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTTFS4C10NTAG
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 23.6 W; No. of Elements: 1; JESD-609 Code: e3;
NTTFS4C10NTWG
NTTFS4C10NTWG by Onsemi is a N-CHANNEL FET with 44A max drain current and 23.6W power dissipation. Ideal for high-power applications, it operates at up to 150°C with surface mount configuration for efficient heat dissipation.
NTTFS4C06NTAG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 31 W; Package Shape: SQUARE; No. of Terminals: 5;
NTTFS4824NTAG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 46.3 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
NTTFS4C25NTWG
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 20.2 W; Maximum Drain Current (ID): 27 A; Terminal Finish: MATTE TIN;
NTTFS4C06NTWG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 31 W; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
NTTFS4C25NTAG
NTTFS4C25NTAG by Onsemi is a N-CHANNEL FET with 27A max drain current and 20.2W power dissipation. It operates at up to 150°C, making it suitable for high-power applications in various industries such as automotive and industrial electronics.
NTTFS5D1N06HLTAG
NTTFS1D2N02P1E
NTTFS1D2N02P1E by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.001 ohm RDS(ON), and 180A ID. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max temp of 150°C. The transistor features a DUAL terminal position and PLASTIC/EPOXY package material.
NTTFS4932NTAG
NTTFS4932NTAG by Onsemi is a N-CHANNEL FET with 30V DS Breakdown Voltage and 79A Drain Current. Ideal for SWITCHING applications, it features a SINGLE configuration with built-in diode, operating in ENHANCEMENT MODE. This small outline transistor has 0.0055 ohm RDS(ON) and can handle up to 43W power dissipation at 150°C.
NTTFS3A08PTWG
NTTFS3A08PTAG
Small Signal Field-Effect Transistors; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
NTTFS018N12MC
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Position: DUAL; Maximum Operating Temperature: 150 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
NTTFS002N03CTAG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 91 W; Maximum Operating Temperature: 150 Cel; Maximum Feedback Capacitance (Crss): 55 pF;
NTTFS3A08PZTAG
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 4.9 W; Maximum Time At Peak Reflow Temperature (s): 30; No. of Elements: 1;
NTTFS024N06CTAG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 28 W; Transistor Element Material: SILICON; JESD-30 Code: S-PDSO-F8;
NTTFS3A08PZTWG
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 4.9 W; Maximum Drain Current (Abs) (ID): 22 A; Maximum Operating Temperature: 150 Cel;
NTTFD1D8N02P1E
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 36 W; Transistor Application: SWITCHING; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
NTTFS003N03CTAG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 33 W; Maximum Drain-Source On Resistance: .0051 ohm; Maximum Operating Temperature: 150 Cel;
NTTFS115P10M5
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 41 W; Maximum Feedback Capacitance (Crss): 4.5 pF; JESD-30 Code: S-PDSO-N8;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved