Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NP2300SAT3G by Onsemi is a single silicon surge protector with 2 terminals, capable of handling a max DC off-state voltage of 190V. It operates b/w -40 °C to 150°C and features a thyristor surge protector trigger device. Ideal for applications requiring UL recognized surge protection in compact spaces.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
AZTECH Wire
$2.580
$2.480
$2.430
$2.380
Kepictronics
TANS Electronics
Kulean Microsystems
Problanco Electronics
SupplyDigital Components
Corphita
Corohmni
UHIMA Technologies
PLASTIC/EPOXY material offers good protection against external elements and ensures durability of the surge protector.
Surface mount capability allows for easy and convenient installation of the surge protector on circuit boards.
Can effectively handle high voltage surges up to 190V, providing reliable protection for connected devices.
THYRISTOR technology ensures quick response to surge events, offering efficient protection for sensitive electronics.
Can operate effectively in high temperature environments, ensuring consistent protection even in challenging conditions.
Silicon Surge Protectors NP2300SAT3G attributes and parameters. Explore more Silicon Surge Protectors devices from Onsemi
Maximum Breakdown Voltage:
Configuration:
Maximum DC Off-state Voltage:
Maximum Holding Current:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Reference Standard:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
NP2300SAT3G Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
PCN Obsolescence/ EOL - TSPD Product 07/Sept/2012
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
1N4148WT
Fairchild Semiconductor
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NP1300SAMCT3G
Onsemi
NP1300SAMCT3G by Onsemi is a single silicon surge protector with 20A non-repetitive peak on-state current. It has a max DC off-state voltage of 120V and operates b/w -55 to 150 °C. Ideal for applications requiring protection against surges in electronic circuits.
TISP4070M3AJR
Power Innovations
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Breakdown Voltage: 70 V;
TISP4240F3LM
TISP4240F3LM by Texas Instruments is a single silicon surge protector with 4A non-repetitive peak on-state current. It has a max breakdown voltage of 240V and operates b/w -40°C to 150°C. Ideal for protecting electronic devices from voltage surges in various applications.
NP1100SCMCT3G
NP1100SCMCT3G by Onsemi is a silicon surge protector with a non-repetitive peak on-state current of 30A. It features a max DC off-state voltage of 90V and operates b/w -55 °C to 150°C. Ideal for applications requiring protection against surges in electronic circuits.
NTVB058NSC-L
NTVB058NSC-L by Onsemi is a silicon surge protector with a max breakdown voltage of 77V. It has a trigger device type of SILICON SURGE PROTECTOR and operates in temperatures ranging from -40 °C to 150°C. This single configuration device with surface mount capability is ideal for protecting electronic circuits from voltage spikes.
TISP3380F3P
TISP3380F3P by Texas Instruments is a silicon surge protector with 2 series-connected elements. It offers a non-repetitive peak on-state current of 6A and a max DC off-state voltage of 270V. Ideal for applications requiring protection against surges in electrical circuits.
TISP4400M3LM
TISP4400M3LM by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, has 400V breakdown voltage, and UL recognized. Ideal for protecting electronic devices from power surges in various applications.
NP2600SCT3G
NP2600SCT3G by Onsemi is a single silicon surge protector with 2 terminals, max breakdown voltage of 300V, and trigger device type as thyristor. It has a small outline package style and is suitable for applications requiring protection against surges in electronic circuits.
PLED6Q12
Littelfuse
The Littelfuse PLED6Q12 is a silicon surge protector with 6V min breakdown voltage and 16V max breakdown voltage. It is a single configuration chip carrier with matte tin terminal finish, suitable for applications requiring protection against electrical surges in temperature range of -40 to 150°C.
TISP4400H3LPR
TISP4400H3LPR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current and 400V max breakdown voltage. It features a cylindrical package style, wire terminals, and bottom terminal position. Ideal for protecting electronic devices from power surges in various applications.
SP721ABG
SP721ABG by Littelfuse is a silicon surge protector with 12 elements and 8 terminals. It features a complex configuration, matte tin terminal finish, and UL recognized reference standard. Ideal for surface mount applications requiring protection against voltage surges up to 260°C peak reflow temperature.
TISP4320F3SL
TISP4320F3SL by Texas Instruments is a single silicon surge protector with 6A peak current and 320V breakdown voltage. Ideal for protecting electronic devices, it has a temperature range of -40 to 150°C and UL recognition. Its through-hole terminals make it easy to install in various applications.
SMP100-230
SMP100-230 by STMicroelectronics is a silicon surge protector with 60A non-repetitive peak on-state current and 200V repetitive peak reverse voltage. It is a single configuration device in a plastic/epoxy package, suitable for surface mount applications. With a max operating temperature of 150 °C, it provides protection against voltage surges in various electronic circuits.
TBU-CA025-050-WH
Bourns
SILICON SURGE PROTECTOR; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN;
TISP3145H3SL
TISP3145H3SL by Texas Instruments is a Silicon Surge Protector with 60A Non Repetitive Peak On-state Current. It features SERIES CONNECTED, CENTER TAP configuration and 2 elements. Ideal for protecting electronic devices from voltage surges in various applications.
TISP4180F3LMR
TISP4180F3LMR by Texas Instruments is a single silicon surge protector with a non-repetitive peak on-state current of 4A. It has a max DC off-state voltage of 145V and operates b/w -40°C to 150°C. Ideal for protecting electronic circuits from voltage surges in various applications.
SMTPA62
STMicroelectronics' SMTPA62 is a silicon surge protector with 16A non-repetitive peak on-state current and 62V repetitive peak reverse voltage. It is a surface-mount device in a small outline package, ideal for protecting electronic circuits from voltage surges in various applications.
TPA130
STMicroelectronics' TPA130 is a single silicon surge protector with 16A non-repetitive peak current and 130V repetitive peak reverse voltage. It is used for surge protection in applications requiring isolated case connection, with operating temperatures ranging from -55 °C to 150°C.
SMP100LC-230
SMP100LC-230 by STMicroelectronics is a silicon surge protector with 24A non-repetitive peak on-state current and 230V repetitive peak reverse voltage. It is a single configuration device in a surface-mount package, suitable for applications requiring protection against voltage surges. Operating temperature ranges from -55°C to 150°C, making it ideal for various electronic systems.
P3100SB
Mde Semiconductor
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Non Repetitive Peak On-state Current: 30 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
P2300SALRP
THYRISTOR SURGE PROTECTOR; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; Qualification: Not Qualified; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3;
NP2300GARLG
THYRISTOR SURGE PROTECTOR; Package Style (Meter): LONG FORM; Surface Mount: NO; Terminal Position: AXIAL; Configuration: SINGLE; Case Connection: ISOLATED;
NP2300GBRLG
NP2300SAMCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Qualification: Not Qualified;
NP2300SBMCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Finish: TIN;
NP2300SBT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Moisture Sensitivity Level (MSL): 1;
NP2300SCMCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-609 Code: e3;
NP2300SCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel;
NP2300SET3G
THYRISTOR SURGE PROTECTOR; Surface Mount: YES; Maximum Holding Current: 150 mA; Maximum Operating Temperature: 150 Cel; Maximum Breakdown Voltage: 260 V; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved