Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NP2300SBT3G by Onsemi is a silicon surge protector with a max breakdown voltage of 260V and max operating temperature of 150 °C. It features a thyristor surge protector configuration in a small outline package, suitable for applications requiring protection against voltage surges.
Median Price
$0.277
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.230
10k+ parts
$0.205
DigiKey
$0.350
Verical
$0.257
Digiode
$0.217
Chip Stock
DigiKey Marketplace
Vyrian
Corphita
Corohmni
$0.228
AZTECH Wire
$17.940
Kepictronics
Continental Prestige Electronics
$0.196
SupplyDigital Components
Kulean Microsystems
UHIMA Technologies
TANS Electronics
Problanco Electronics
Plastic/Epoxy material makes the surge protector lightweight and durable, ensuring long-term protection for your electronics.
Single configuration simplifies installation and setup, making it easy to use for users of all levels.
Surface mount capability allows for easy and convenient installation on various surfaces, providing flexibility in placement.
Rectangular shape offers a compact design that can easily fit into tight spaces or crowded outlets.
Having only two terminals simplifies the installation process and reduces the chances of wiring errors.
With a high maximum DC off-state voltage, this surge protector can effectively protect against power surges and voltage spikes.
High maximum operating temperature ensures the surge protector can withstand a wide range of environmental conditions without compromising performance.
Thyristor surge protector technology offers reliable and fast-acting protection against power surges, ensuring the safety of connected devices.
High maximum holding current allows the surge protector to provide continuous protection for connected devices without tripping or degrading performance.
High maximum breakdown voltage ensures the surge protector can effectively handle voltage spikes and surges up to the specified limit.
Silicon Surge Protectors NP2300SBT3G attributes and parameters. Explore more Silicon Surge Protectors devices from Onsemi
Maximum Breakdown Voltage:
Configuration:
Maximum DC Off-state Voltage:
Maximum Holding Current:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Reference Standard:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
NP2300SBT3G Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
PCN Obsolescence/ EOL - TSPD Product 07/Sept/2012
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
STM32H753BIT6
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
EU2B-YS3103F
Idec
ROTARY SWITCH;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
CRCW06030000Z0EAHP
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TISP4180H3LPR
TISP4180H3LPR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak current and 180V breakdown voltage. It features a cylindrical package style, wire terminals, and thyristor surge protection. Ideal for safeguarding electronic devices from voltage spikes in various applications.
TPN3021RL
STMicroelectronics TPN3021RL is a 3-element silicon surge protector with 9A non-repetitive peak current. It features delta connection, 8 terminals, and operates b/w -55°C to 150°C. Ideal for surge protection applications in electronics due to its high breakdown voltage of 38V.
TISP4240H3BJ
TISP4240H3BJ by Texas Instruments is a single silicon surge protector with 60A peak current, 180V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in various applications due to its thyristor surge protection design and UL recognition.
TISP7210H3SL
TISP7210H3SL by Texas Instruments is a 3-element surge protector with 60A peak current, 210V breakdown voltage, and 600mA holding current. It is a thyristor surge protector in a rectangular package for surge protection applications. Operating temperature range from -40°C to 150°C makes it suitable for various industrial uses.
TISP4265M3LPR
TISP4265M3LPR by Texas Instruments is a single thyristor surge protector with 30A non-repetitive peak on-state current and 265V max breakdown voltage. It features a plastic/epoxy package body, round shape, and wire terminals. Ideal for protecting electronic devices from voltage surges in various applications.
NP2300SCT3G
The Onsemi NP2300SCT3G is a single silicon surge protector with a max breakdown voltage of 260V. It operates in temperatures ranging from -40 °C to 150°C and features a thyristor surge protector trigger device. Ideal for applications requiring UL recognized protection against electrical surges.
P3403AC
Littelfuse
The Littelfuse P3403AC is a silicon surge protector with 3 elements, 300V repetitive peak reverse voltage, and 50A non-repetitive peak on-state current. It is commonly used as a thyristor surge protector in applications requiring protection against electrical surges.
TLP270M
TLP270M by STMicroelectronics is a Silicon Surge Protector with 3 elements in a delta configuration. It has a non-repetitive peak on-state current of 31A and max breakdown voltage of 400V. This surface-mount device in a small outline package is ideal for surge protection applications.
SMTPA68
SMTPA68 by STMicroelectronics is a single silicon surge protector with 16A non-repetitive peak on-state current and 68V repetitive peak reverse voltage. It is used for surge protection in applications requiring a small outline package, operating b/w -55 °C to 150°C.
RBO40-40M
RBO40-40M by STMicroelectronics is a silicon surge protector with a max clamping voltage of 40V. It features a single configuration with built-in diode and comes in a small outline package shape for surface mount applications. Ideal for protecting electronic devices from voltage spikes.
NP0900SCT3G
NP0900SCT3G by Onsemi is a single silicon surge protector with a max DC off-state voltage of 75V and trigger device type as thyristor. It has a max operating temperature of 150 °C and is ideal for applications requiring UL recognized surge protection in small outline packages.
SMP100-270
SMP100-270 by STMicroelectronics is a silicon surge protector with 60A non-repetitive peak on-state current. It has a max breakdown voltage of 370V and operates at temperatures up to 150 °C. Ideal for surface mount applications, it offers protection against electrical surges in various electronic devices.
TISP4145M3LP
TISP4145M3LP by Texas Instruments is a single silicon surge protector with 30A non-repetitive peak on-state current. It features a cylindrical package style, wire terminals, and 145V max breakdown voltage. Ideal for protecting electronic devices from power surges in various applications.
MMT05A230T3G
MMT05A230T3G by Onsemi is a silicon surge protector with a max DC off-state voltage of 170V and max breakdown voltage of 265V. It is a thyristor surge protector suitable for applications requiring protection against electrical surges. With UL recognition, it operates b/w -40 °C to 125°C, making it ideal for various electronic devices.
ETP01-2821RL
STMicroelectronics ETP01-2821RL is a Silicon Surge Protector with 36V breakdown voltage, 30mA holding current, and -55 to 150°C operating temperature range. It's surface-mountable and ideal for protecting electronic circuits from voltage spikes in various applications.
NP0640SBMCT3G
NP0640SBMCT3G by Onsemi is a single silicon surge protector with a non-repetitive peak on-state current of 30A. It operates b/w -55 °C to 150°C, featuring a max DC off-state voltage of 58V. This thyristor surge protector is ideal for applications requiring UL recognized trigger devices in surface mount configurations.
HBL5006XV2T1G
SILICON SURGE PROTECTOR; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: MATTE TIN;
NTVB065NSA-L
NTVB065NSA-L by Onsemi is a silicon surge protector with a max breakdown voltage of 88V. It operates b/w -40 °C to 150°C, making it suitable for various applications requiring protection against surges. With surface mount capability and dual terminals, it offers reliable performance in a small outline package.
TISP4350H3BJR
TISP4350H3BJR by Texas Instruments is a single silicon surge protector with 60A peak current, 255V voltage, and 150°C max temp. Ideal for protecting circuits from surges in applications like power supplies and telecommunications due to its thyristor surge protection design.
SMP50-200
SMP50-200 by STMicroelectronics is a single silicon surge protector designed for surface mounting. It features a non-repetitive peak on-state current of 16 A, a repetitive peak reverse voltage of 200 V, and operates b/w -55 °C to 150°C. Ideal for protecting circuits from voltage spikes in compact electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NP2300GARLG
THYRISTOR SURGE PROTECTOR; Package Style (Meter): LONG FORM; Surface Mount: NO; Terminal Position: AXIAL; Configuration: SINGLE; Case Connection: ISOLATED;
NP2300GBRLG
NP2300SAMCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Qualification: Not Qualified;
NP2300SAT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel;
NP2300SBMCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Finish: TIN;
NP2300SCMCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-609 Code: e3;
NP2300SET3G
THYRISTOR SURGE PROTECTOR; Surface Mount: YES; Maximum Holding Current: 150 mA; Maximum Operating Temperature: 150 Cel; Maximum Breakdown Voltage: 260 V; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved