Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TISP4240M3BJR-S by Bourns is a single silicon surge protector with a non-repetitive peak on-state current of 32A. It operates b/w -40°C to 150°C, featuring a max DC off-state voltage of 180V and breakdown voltage of 240V. Ideal for applications requiring reliable overvoltage protection in compact designs.
Median Price
$0.889
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.748
100+ parts
$0.604
1k+ parts
$0.473
10k+ parts
-
Farnell
$1.030
$0.422
$0.298
$0.260
DigiKey
$1.170
$0.482
$0.340
$0.262
Mouser Electronics
$0.483
$0.333
$0.290
Newark
$1.210
$0.497
$0.350
Element14
$1.670
$0.680
$0.446
Arrow
Master Electronics
$0.294
$0.255
Verical
$0.346
$0.300
TTI Europe
Chip1Stop
$0.481
$0.336
Greenchips
$0.278
$0.265
$0.252
$0.227
Nova Conductors
$0.344
Maritex
$0.934
$0.402
$0.337
TME
$1.090
$0.455
$0.380
Chip Stock
Goldney Electronics S.L.
ComSIT Distribution GmbH
Bristol Electronics
IBS Electronics
$0.426
$0.369
Component Sense
Vyrian
Electro Sonic
$0.271
NAC Semi
$0.374
SIE Connect GmbH - GreenChips
LIBRA Elektronik GmbH
Ampacity Inc.
$0.223
Semicontronic
$0.217
$0.216
Argo Parts USA
$0.329
Continental Prestige Electronics
$0.801
$0.476
$0.302
$0.249
Corohmni
$2.491
Aztec Data Supply Inc.
$3.745
iodParts Technologies Inc.
Perfect Parts
Assy Fe
Kepictronics
Eastek
GreenTree Electronics
Abacus Technologies
Glotronic Ltd.
Authorized Procurement Solutions
Netroflash
$0.327
$0.320
Robosynatics
Lucentia Tech
The use of plastic/epoxy material in the package body provides durability and ensures the protector can withstand harsh environments.
Single configuration makes the surge protector easy to install and maintain.
High peak on-state current ensures effective protection against surges and overvoltage events.
Surface mount capability allows for convenient and space-saving installation in electronic devices.
Rectangular shape makes the surge protector compact and ideal for applications where space is limited.
High off-state voltage rating ensures reliable protection for sensitive electronic components.
Wide operating temperature range allows the surge protector to function effectively in extreme conditions.
High breakdown voltage rating ensures robust protection against voltage spikes and surges.
The use of thyristor surge protector technology provides fast and efficient response to voltage fluctuations.
Silicon Surge Protectors TISP4240M3BJR-S attributes and parameters. Explore more Silicon Surge Protectors devices from Bourns
Maximum Breakdown Voltage:
Configuration:
Maximum DC Off-state Voltage:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Reference Standard:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
TISP4240M3BJR-S Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
PCN Assembly/Origin - Semiconductor Warehouse 21/Mar/2019
PCN Packaging - Mult Devs Label Change 28/Oct/2022
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
Lite-on Semiconductor
Continental Device India
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Synsemi
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
Pro-an Electronic
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
TISP4125F3SL
Texas Instruments
TISP4125F3SL by Texas Instruments is a SILICON SURGE PROTECTOR with 6A Non Repetitive Peak On-state Current, 100V Max DC Off-state Voltage, and -40 to 150 °C Operating Temperature. Ideal for surge protection in electronic circuits.
NP2600GARLG
NP2600GARLG by Onsemi is a single silicon surge protector with 2 wire terminals. It has a max DC off-state voltage of 220V and a max breakdown voltage of 300V. This thyristor surge protector is UL recognized and commonly used for isolating case connections in various applications.
SMP100-8
STMicroelectronics
SMP100-8 by STMicroelectronics is a silicon surge protector with 60A non-repetitive peak on-state current and 6V repetitive peak reverse voltage. It is a surface-mount device in a small outline package, ideal for protecting electronic circuits from voltage surges in various applications.
TISP4380F3LMFR
TISP4380F3LMFR by Texas Instruments is a single silicon surge protector with 4A non-repetitive peak on-state current. It has a max breakdown voltage of 380V and operates b/w -40°C to 150°C. Ideal for protecting electronic devices from voltage surges in various applications.
NTVB170SA-L
NTVB170SA-L by Onsemi is a silicon surge protector with a max breakdown voltage of 265V. It operates b/w -40 °C to 150°C, making it suitable for various applications requiring protection against surges. With a surface-mount configuration and dual terminals, it offers reliable performance in compact electronic devices.
TISP4300H3LMFR
TISP4300H3LMFR by Texas Instruments is a single silicon surge protector with a non-repetitive peak on-state current of 60A. It operates b/w -40°C to 150°C, offering protection up to 230V DC off-state voltage. Ideal for applications requiring reliable overvoltage protection using thyristor surge protector technology.
TISP4400H3LP
TISP4400H3LP by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current and 400V max breakdown voltage. It features a cylindrical package shape with wire terminals, ideal for protecting electronic devices from power surges in various applications.
P0080SCLRP
Littelfuse
THYRISTOR SURGE PROTECTOR; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 40; Qualification: Not Qualified;
SMTPA270
SMTPA270 by STMicroelectronics is a silicon surge protector with 16A non-repetitive peak on-state current and 270V repetitive peak reverse voltage. It is used for surge protection in applications requiring a trigger device with a max operating temperature of 150 °C.
TISP4080H3LMFR
TISP4080H3LMFR by Texas Instruments is a single silicon surge protector with 60A peak current, 65V DC voltage, and 80V breakdown voltage. It is a thyristor surge protector used in applications requiring protection against electrical surges at temperatures ranging from -40°C to 150°C.
TISP4165M3LM
TISP4165M3LM by Texas Instruments is a single silicon surge protector with a non-repetitive peak on-state current of 32A. It operates b/w -40°C to 150°C, featuring a max breakdown voltage of 165V. Ideal for applications requiring reliable overvoltage protection like telecommunications and industrial equipment.
SMTPA220
SMTPA220 by STMicroelectronics is a silicon surge protector with 16A non-repetitive peak on-state current and 220V repetitive peak reverse voltage. It is used for surge protection in applications requiring a trigger device with a max operating temperature of 150 °C.
TISP4180F3LMFR
TISP4180F3LMFR by Texas Instruments is a single silicon surge protector with 4A non-repetitive peak on-state current. It has a max DC off-state voltage of 145V and trigger device type as thyristor surge protector. Ideal for protecting electronic devices from voltage spikes in various applications.
TISP3380F3DR
TISP3380F3DR by Texas Instruments is a Silicon Surge Protector with 2 series-connected elements. It has a non-repetitive peak on-state current of 4A and max breakdown voltage of 380V. Ideal for protecting electronic devices from surges, it operates b/w 0-70°C and is UL recognized.
TISP3150F3SL
TISP3150F3SL by Texas Instruments is a Silicon Surge Protector with 6A Non Repetitive Peak On-state Current. It features SERIES CONNECTED, CENTER TAP configuration and 2 elements. Ideal for protecting against surges in electronic circuits with a Max Breakdown Voltage of 150V.
SMTPA200
SMTPA200 by STMicroelectronics is a silicon surge protector with 16A non-repetitive peak on-state current and 200V repetitive peak reverse voltage. It is used for surge protection in applications requiring a trigger device with a max operating temperature of 150 °C.
THBT20012D
STMicroelectronics THBT20012D is a silicon surge protector with 8 terminals in rectangular plastic/epoxy package. It has a max breakdown voltage of 290V and is UL recognized. Ideal for protecting electronic devices from power surges in various applications.
DB3
Semiconductors
SILICON SURGE PROTECTOR; Surface Mount: NO; Terminal Finish: Tin/Lead (Sn/Pb); Maximum On-state Voltage: 5 V; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 155 Cel;
TLP200M
STMicroelectronics' TLP200M is a silicon surge protector with 3 delta-connected elements. It has a non-repetitive peak on-state current of 31A and a max breakdown voltage of 290V. Ideal for surface mount applications, this device features a gull wing terminal form in a small outline package style.
TISP2125F3SL
TISP2125F3SL by Texas Instruments is a silicon surge protector with 3 delta-connected elements. It has a max breakdown voltage of 125V and can handle a non-repetitive peak on-state current of 6A. This device, in an inline package style, is ideal for protecting electronic circuits from voltage surges.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TISP4400T3BJR-S
Bourns
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Body Material: PLASTIC/EPOXY;
TISP4P020L1NR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Shape: RECTANGULAR;
TISP4015L1AJR-S
Bourns TISP4015L1AJR-S is a single silicon surge protector with 22A peak current, ideal for surface mount applications. Featuring 8V DC off-state voltage and 15V breakdown voltage, it offers protection against transient surges. With UL recognition, this thyristor surge protector in a small outline package is suitable for various electronic devices.
TISP4070M3AJR-S
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Form: C BEND;
TISP4070M3AJR
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; No. of Elements: 1;
Power Innovations
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Breakdown Voltage: 70 V;
TISP4070M3BJR-S
Bourns TISP4070M3BJR-S is a single silicon surge protector with 32A peak current, ideal for protecting circuits. With a max breakdown voltage of 70V and operating temperature range from -40 to 150°C, it ensures reliable performance. This surface-mount device in small outline package suits various applications requiring transient voltage suppression.
TISP4015L1BJR-S
TISP4015L1BJR-S by Bourns is a single silicon surge protector with a non-repetitive peak on-state current of 22A. It features a max DC off-state voltage of 8V and a breakdown voltage of 15V, making it ideal for protecting sensitive electronics from power surges. This surface-mount device in a small outline package is UL recognized and commonly used in applications requiring reliable overvoltage protection.
TISP4070H3BJR-S
Bourns TISP4070H3BJR-S is a single silicon surge protector with 60A peak current, 58V max voltage, and -40 to 150°C operating range. Ideal for protecting circuits from transient overvoltage events in various applications.
TISP4040H1BJR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Finish: MATTE TIN;
TISP4082F3SL
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Maximum Operating Temperature: 150 Cel;
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR;
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Maximum Breakdown Voltage: 82 V;
TISP4250J3BJR-S
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Reference Standard: UL RECOGNIZED;
TISP4265M3BJR-S
TISP4265M3BJR-S by Bourns is a single silicon surge protector with a max DC off-state voltage of 200V. It has a non-repetitive peak on-state current of 32A and operates b/w -40°C to 150°C. Ideal for protecting electronic circuits from transient overvoltage events in various applications.
TISP4395J3BJR-S
TISP4350H3BJR-S
TISP2082F3D
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: DELTA CONNECTED, 3 ELEMENTS; Maximum Breakdown Voltage: 82 V;
TISP1082F3P
THYRISTOR SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: DUAL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS; Package Body Material: PLASTIC/EPOXY;
TISP4240M3BJR
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Breakdown Voltage: 240 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved