Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV1063AD100R2G by Onsemi is a switching controller with 1.5A output current, 9V nominal output voltage, and 100kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and pulse width modulation control technique. Package style is small outline with gull wing terminals.
Median Price
$1.435
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.120
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$1.750
$1.042
$0.913
$0.852
Mouser Electronics
$1.800
$1.080
$0.904
$0.844
Arrow
$2.016
$0.823
$0.801
$0.767
Rochester
$1.070
$0.888
$0.792
Verical
$1.110
$0.990
Flip Electronics (Authorized)
Digiode
$0.643
Vyrian
$0.677
Sensible Micro Corp
Flip Electronics
Chip Stock
Bristol Electronics
$1.125
$0.675
Corphita
$0.609
Corohmni
Vigor
$0.710
Microchip USA
$5.889
Perfect Parts
Infinite Electronics LLP (Excess)
Formix International (Excess)
Lixinc
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
UHIMA Technologies
Authorized Procurement Solutions
Provides durability and reliability for long-term use.
Allows for easy installation and space-saving on PCBs.
Suitable for a wide range of applications requiring a 14V power supply.
Ensures stable performance even in high-temperature environments.
Efficiently regulates output by monitoring current levels.
Provides a reliable and corrosion-resistant connection.
Supports a decent amount of current for various applications.
Offers precise control of output voltage with PWM signals.
Provides a stable 9V output for powering electronics.
Switching Regulators & Controllers NCV1063AD100R2G attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
Control Technique:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Nominal Supply Voltage (Vsup):
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
NCV1063AD100R2G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev 11/Oct/2023
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
Semitronics
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
PIC18F4550T-I/PT
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
Philips Components
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM25011MYX/NOPB
Switching Regulator or Controllers; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
LM2672M-3.3/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
171032401
Wuerth Elektronik & Kg
171032401 by Wurth Elektronik is a BUCK switching regulator with a nominal input voltage of 24V and nominal output voltage of 12V. It operates in automotive-grade temperatures (-40 to 125°C) with a max switching frequency of 800 kHz. This MICROELECTRONIC ASSEMBLY is surface mountable and suitable for various applications requiring efficient power regulation.
TPS62740DSST
Texas Instruments
TPS62740DSST by Texas Instruments is a switching regulator with a voltage-mode control technique. It operates in an industrial temperature range from -40°C to 85°C, with a max output current of 0.3A and a max switching frequency of 2MHz. Ideal for applications requiring efficient power conversion in compact spaces.
LM2675M-5.0/NOPB
MC34063ABN
STMicroelectronics
MC34063ABN by STMicroelectronics is an 8-terminal switching regulator with a max output current of 1.5A and a boost switcher configuration. Operating b/w -40 to 85°C, it has a voltage-mode control mode and supports input voltages from 3V to 40V. Ideal for industrial applications requiring efficient power conversion up to 100kHz frequency.
LM2733YMF/NOPB
LM2733YMF/NOPB by Texas Instruments is a switching regulator with 5 terminals, operating temperature range of -40 to 125°C, and output voltage ranging from 3V to 40V. It is ideal for automotive applications due to its compact size, low profile design, and current-mode control technique. With a max output current of 1.5A and switching frequency of up to 1850 kHz, it offers efficient power management in various electronic systems.
LT1933ES6#TRMPBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM60430AQRPKRQ1
Texas Instruments' LM60430AQRPKRQ1 is a switching regulator with 3A output current, 460kHz max switching frequency, and -40 to 150°C operating temp. Ideal for automotive applications due to AEC-Q100 screening level, it offers a compact chip carrier package style with 13 terminals for efficient power management in tight spaces.
Analog Devices
Analog Devices' LT1933ES6#TRMPBF is a small outline, low profile switching regulator with 1.05A output current and 600kHz max switching frequency. Ideal for applications requiring efficient power conversion in compact spaces, such as portable electronics or IoT devices. Operating temperature range from 0 to 70°C ensures reliable performance in various environments.
LMR54410FDBVR
LMR54410FDBVR by Texas Instruments is a switching regulator with a 1A output current and 1100 kHz max switching frequency. It operates b/w -40 to 125°C, suitable for various applications requiring a compact design and efficient power management in the voltage range of 4-36V.
LM2674M-5.0/NOPB
LM2674M-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a max output voltage of 37V, suitable for automotive applications. Operating b/w -40°C to 125°C, it has a small outline package style and offers a wide input voltage range from 6.5V to 40V, making it ideal for various power supply designs.
LT1616ES6#TRPBF
LT1616ES6#TRPBF by Analog Devices is a small outline switching regulator with 6 terminals, operating at 0-70°C. It features a buck switcher configuration, pulse width modulation control technique, and can handle up to 0.85A output current. Ideal for applications requiring efficient power conversion in compact spaces.
UCC28070PWRG4
UCC28070PWRG4 by Texas Instruments is a current-mode power factor controller with a boost switcher configuration. It operates at a max switching frequency of 330 kHz and has a max output current of 0.75 A. This IC is designed for automotive applications, featuring a small outline package style suitable for surface mount assembly.
LM2594HVM-5.0
LM2594HVM-5.0 by Texas Instruments is a switching regulator with VOLTAGE-MODE control, offering a 5V output voltage and 0.5A max current. Ideal for automotive applications, it operates b/w -40 to 125°C, with a wide input range of 4.5V to 60V and compact dimensions of 4.9mm x 3.9mm x 1.75mm in a small outline package.
FAN2001MPX
FAN2001MPX by Onsemi is a switching regulator with 2A output current and 1500kHz max switching frequency. Ideal for industrial applications, it operates b/w -40 to 85°C, in a square package style with 6 terminals for surface mount assembly.
LM2664M6X/NOPB
SWITCHED CAPACITOR CONVERTER; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMZ23603TZX/NOPB
LMZ23603TZX/NOPB by Texas Instruments is a switching regulator with 3A output current, 950 kHz max switching frequency, and 85°C max operating temp. Ideal for industrial applications requiring a compact design and efficient power management in the voltage range of 6V to 36V.
LM22675MRX-5.0/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
LM5166DRCR
LM5166DRCR by Texas Instruments is a switching regulator with a max output voltage of 65V, operating temperature range from -40 to 150°C, and max output current of 0.5A. Ideal for automotive applications due to its compact size, pulse frequency modulation control technique, and wide input voltage range of 3-65V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV1406SNT1G
NCV1406SNT1G by Onsemi is a switching regulator with a max output current of 0.025A and a max switching frequency of 1000kHz. It is commonly used in boost configurations for industrial applications.
NCV1072P100G
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NCV1070STCT3G
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV1071STCT3G
NCV1070STAT3G
NCV1072STAT3G
NCV1060BD060R2G
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV1070P065G
NCV1071P065G
NCV1071P100G
NCV1071STBT3G
NCV1070P130G
NCV1072P065G
NCV1063AD060R2G
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV1071P130G
NCV1070STBT3G
NCV1034DR2G
NCV1034DR2G by Onsemi is a voltage-mode switching controller with a buck switcher configuration. It operates in an automotive temperature grade range from -40 to 125°C, making it suitable for automotive applications. With a max switching frequency of 500 kHz and small outline package style, it offers efficient power management in compact designs.
NCV1060BD100R2G
NCV1070P100G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved