Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC10EP29DTR2G by Onsemi is a dual-function ECL flip-flop with 0.5ns propagation delay, operating from -40 to 85 °C. It features complementary output polarity, positive edge trigger, and a supply voltage range of 3V to 5.5V. Ideal for industrial applications requiring fast signal processing in a compact SOT package.
Median Price
$11.228
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$9.980
1k+ parts
$8.930
10k+ parts
$8.400
Verical
$12.475
$11.162
Digiode
$10.564
Vyrian
Corphita
$10.008
Corohmni
$10.610
Component Stockers USA
$11.360
$10.680
$9.660
AZTECH Wire
$15.830
Advanced Electronics
$30.462
$27.720
$24.979
SupplyDigital Components
Kulean Microsystems
Microchip USA
Continental Prestige Electronics
$9.430
UHIMA Technologies
TANS Electronics
Problanco Electronics
The use of plastic/epoxy material makes the latch and flip-flop lightweight and durable, ideal for various applications.
The surface mount capability allows for easy and convenient installation of the latch and flip-flop on PCBs, saving space and reducing assembly time.
Having two functions in one component adds versatility and efficiency to the design, making it a preferred choice for complex circuitry.
The nominal supply voltage of 3.3V ensures compatibility with a wide range of circuit designs and power requirements.
With a high maximum operating temperature of 85 °C, this latch and flip-flop can withstand harsh environmental conditions and operate reliably.
The positive edge trigger type ensures precise and accurate signal processing, improving the overall performance of the latch and flip-flop.
The ECL technology used in this product offers high-speed operation and low power consumption, making it suitable for demanding applications.
Latches & Flip-Flops MC10EP29DTR2G attributes and parameters. Explore more Latches & Flip-Flops devices from Onsemi
Additional Features:
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Logic IC Type:
Moisture Sensitivity Level (MSL):
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Power Supplies (V):
Maximum Power Supply Current (ICC):
Propagation Delay (tpd):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Type:
Width:
MC10EP29DTR2G Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - 2Q2016 Product EOL 22/Jul/2016
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
Digitron Semiconductors
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
STM32H750VBT6
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
BAV99-7-F
Multicomp Pro
74AUP1G74DC,125
NXP Semiconductors
The NXP Semiconductors 74AUP1G74DC,125 is a latch & flip-flop with 1 function and a supply voltage of 1.2V. It has a small outline package style and is suitable for automotive applications.
HD74LS76AP
Hitachi
J-K FLIP-FLOP; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD74HC377PWR
Texas Instruments
CD74HC377PWR by Texas Instruments is a CMOS latch with 8 bits and a propagation delay of 53 ns. It operates at a nominal voltage of 5V and has a max frequency of 20 MHz. This latch is commonly used in military-grade applications due to its temperature grade and moisture sensitivity level.
HEF4013BT-Q100J
Nexperia
D FLIP-FLOP; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
74HC112PW,118
J-K FLIP-FLOP; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
MC14174BCPG
Rochester Electronics
D FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
SN74AHC273PWRG4
SN74AHC273PWRG4 by Texas Instruments is an 8-bit latch with a propagation delay of 12.5 ns, suitable for automotive applications. It operates at a supply voltage range of 2-5.5 V and has a max frequency of 70 MHz, making it ideal for high-speed data storage in compact designs. With surface mount capability and small outline packaging, this CMOS technology-based device offers efficient performance in tight spaces.
SN74LS377N
SN74LS377N by Texas Instruments is an 8-bit latch with a propagation delay of 27ns at 5V, suitable for positive edge triggering applications. Operating b/w 0-70°C, it has a max frequency of 30MHz and consumes up to 28mA of power. Ideal for commercial-grade TTL technology projects requiring reliable data storage and transfer.
CD4013BPWR
CD4013BPWR by Texas Instruments is a CMOS latch/flip-flop with 2 functions. It has a propagation delay of 300 ns and operates at a nominal voltage of 5V. This IC is commonly used in military-grade applications due to its small size, low power consumption, and high frequency capabilities.
MC74AC74DG
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
CD74AC273M96E4
CD74AC273M96E4 by Texas Instruments is an 8-bit latch with a 3.3V nominal voltage and 50pF load capacitance. It operates at temperatures ranging from -55 to 125°C, making it suitable for military-grade applications requiring a max frequency of 71MHz. This surface-mount flip-flop has a small outline package style and Gull Wing terminal form, ideal for compact electronic designs.
74LVC1G175GV-Q100,125
D FLIP-FLOP; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR;
SN74HCT74N
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
CD74HC112PWR
CD74HC112PWR by Texas Instruments is a dual latches & flip-flops IC with 2 functions, operating at a supply voltage of 4.5V. It features a propagation delay of 53ns, suitable for applications requiring fast response times in military-grade environments. With surface mount capability and low power consumption, it is ideal for compact electronic designs needing reliable data storage and retrieval.
74LVC2G74DC-Q100H
NXP Semiconductors' 74LVC2G74DC-Q100H is a CMOS latch with 5.9 ns propagation delay, suitable for automotive applications. It operates at 1.8V nominal voltage and has a max frequency of 175MHz, making it ideal for high-speed signal processing in compact designs. With AEC-Q100 screening level and small outline package style, this flip-flop offers reliable performance in harsh environments.
HEF4013BT-Q100J by NXP Semiconductors is a CMOS latches & flip-flops IC with 2 functions, 220 ns propagation delay at 5V. AEC-Q100 screened for automotive applications, it operates b/w -40 to 125 °C and supports a max frequency of 7 MHz.
74LVC1G175GM,115
D FLIP-FLOP; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR;
CD40175BE
Intersil
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD74HCT574M
Thomson Consumer Electronics
D FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
MC74AC74N
Motorola
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC100E143FNR2
D FLIP-FLOP; Temperature Grade: OTHER; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
MC100E143FNR2 by Onsemi is a D flip-flop logic IC with 9 bits and a min operating voltage of 4.2V. It has a propagation delay of 1ns and operates at temperatures up to 85°C. This chip is commonly used in applications that require fast data storage and retrieval, such as high-speed data communication systems.
MC100EP131FAR2G
MC100EP131FAR2G by Onsemi is a 4-bit latch with 0.6 ns propagation delay, operating b/w -40 to 85 °C. It has a supply voltage of 3.3V and supports positive edge trigger type. Ideal for industrial applications requiring fast data processing in compact spaces due to its low profile flatpack design and complementary output polarity.
MC100EP131FAG
MC100EP131FAG by Onsemi is a 4-bit latch with 0.6 ns propagation delay, ideal for industrial applications. It operates at -40 to 85 °C and supports Vsup from 3V to 5.5V. With positive edge trigger and complementary output polarity, it's suitable for high-speed data transfer in electronic systems.
MC100EP131FA
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: LQFP; Package Shape: SQUARE;
MC100EP131FAR2
MC100EP131FAR2 by Onsemi is a 4-bit latch with 0.6 ns propagation delay, operating at -40 to 85 °C. It has a supply voltage of 3.3V, peak reflow temp of 235C, and max frequency of 3GHz. Ideal for industrial applications requiring fast positive edge triggering in a compact flatpack design.
MC100EP131MNR4G
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
MC100EL51DTR2G
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
MC100EP52DG
MC100EP52DG by Onsemi is a small outline ECL latch with 8 terminals, operating at -40 to 85°C. It has a propagation delay of 0.38 ns and can handle up to 4 GHz frequency. Ideal for industrial applications requiring fast positive edge triggering in compact designs.
MC100EP31DTG
MC100EP451FAG
MC100EP451FAG by Onsemi is a 6-bit ECL latch with 0.55 ns propagation delay, operating at -40 to 85°C. It features positive edge trigger, complementary output polarity, and supports up to 3GHz frequency. Ideal for industrial applications requiring high-speed data processing in a compact square package.
MC100EP451FAR2
MC100EP451FAR2G
MC100EP451FAR2G by Onsemi is a 6-bit latch with 0.55 ns propagation delay, operating at -40 to 85 °C. It features positive edge trigger, complementary output polarity, and ECL technology. Ideal for high-speed applications requiring fast data processing and precise timing control.
MC100EP451MNR4G
MC100EP51DTG
MC100EP51DTG by Onsemi is a latches & flip-flops IC with 0.5 ns propagation delay, 3.3V nominal voltage, and 3000000000 Hz max frequency. Ideal for industrial applications requiring positive edge trigger type and complementary output polarity in a small outline package.
MC100EP31DG
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MC100EP51DG
MC100EP51DG by Onsemi is a small outline ECL latch with 0.45 ns propagation delay, 3.3V nominal voltage, and 3000000000 Hz max frequency. Ideal for industrial applications requiring fast positive edge triggering in a compact package.
MC100EP131MNG
MC100EP131MNG by Onsemi is a 4-bit latch with 0.6 ns propagation delay, operating at -40 to 85 °C. It has a max frequency of 3 GHz and uses ECL technology. Ideal for industrial applications requiring fast positive edge triggering in a compact square package.
MC100EP52DTG
MC100EP52DTG by Onsemi is a latches & flip-flops IC with 3.3V nominal voltage, 0.38ns propagation delay, and 4000000000Hz max frequency. It is used in applications requiring positive edge trigger type, such as industrial temperature grade environments.
MC10EP51DTG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved