Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC100EP51DG by Onsemi is a small outline ECL latch with 0.45 ns propagation delay, 3.3V nominal voltage, and 3000000000 Hz max frequency. Ideal for industrial applications requiring fast positive edge triggering in a compact package.
Median Price
$9.209
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$14.627
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$15.430
$10.535
$9.797
Mouser Electronics
$10.200
$9.790
Verical
$8.939
Rochester
$8.880
$7.950
$7.480
Flip Electronics (Authorized)
Future Electronics
$9.020
$8.890
Arrow
$9.028
Digiode
$9.376
Nova Conductors
$10.920
Chip Stock
Vyrian
Flip Electronics
IBS Electronics
$12.342
$11.416
NAC Semi
$17.420
$15.840
Cyclops Electronics Ltd
Semtec, LLC
Ampacity Inc.
$8.390
Corphita
$8.883
Corohmni
$9.870
Component Stockers USA
$10.220
$9.610
$8.700
Continental Prestige Electronics
$10.702
Netroflash
$10.374
$10.156
Microchip USA
$44.296
Kulean Microsystems
Problanco Electronics
Authorized Procurement Solutions
SupplyDigital Components
Argo Parts USA
TANS Electronics
UHIMA Technologies
Perfect Parts
This material provides durability and protection for the latch or flip-flop circuit, ensuring a longer lifespan for the product.
The low propagation delay ensures fast response times, making this product suitable for high-speed applications.
The surface mount design allows for easy installation on PCBs, saving space and simplifying the assembly process.
The nominal supply voltage of 3.3V is a commonly used standard, making it compatible with a wide range of electronic systems.
The positive edge trigger type ensures reliable and accurate signal processing, reducing the risk of errors in data transmission.
With a high maximum operating temperature, this latch or flip-flop can function reliably in a variety of environments.
The ECL technology used in this product provides high-speed operation and low power consumption, making it ideal for demanding applications.
Latches & Flip-Flops MC100EP51DG attributes and parameters. Explore more Latches & Flip-Flops devices from Onsemi
Additional Features:
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Logic IC Type:
Maximum Frequency At Nominal Supply:
Moisture Sensitivity Level (MSL):
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Power Supplies (V):
Maximum Power Supply Current (ICC):
Propagation Delay At Nominal Supply:
Propagation Delay (tpd):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Type:
Width:
MC100EP51DG Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1552200253
Molex
WIRE AND CABLE;
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
Yangzhou Yangjie Electronics
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
HD74LS76AP
Renesas Electronics
The Renesas Electronics HD74LS76AP is a TTL latch with 2 functions, 20 ns propagation delay, and 5V nominal voltage. Ideal for applications requiring negative edge triggering, such as digital circuits in commercial extended temperature environments. Package style: IN-LINE, dimensions: 19.2mm x 7.62mm x 5.06mm (LxWxH).
SN74LS273NS
D FLIP-FLOP; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
74LVC1G80GV,125
Nexperia
D FLIP-FLOP; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
CD4027BE
Rca Solid State
J-K FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
SN74LVC74APWR
Texas Instruments
SN74LVC74APWR by Texas Instruments is a dual-function latch with 5.2ns propagation delay, ideal for automotive applications. Operating at 1.8V to 3.6V, it features a max frequency of 150MHz and low power supply current of 0.01mA, making it suitable for high-speed digital systems in compact designs. With a small outline package style and surface mount capability, this CMOS technology flip-flop offers complementary output polarity and positive edge triggering for efficient signal processing.
74LVX74MTCX
National Semiconductor
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
CD74ACT273PWRG4
CD74ACT273PWRG4 by Texas Instruments is an 8-bit latches & flip-flops IC with a propagation delay of 13.5 ns at 5V, suitable for military-grade applications. It features a max frequency of 85 MHz, operates within a temperature range of -55 to 125°C, and has a compact small outline package style for surface mount assembly.
74VHC175MTCX
Fairchild Semiconductor
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
NL17SZ74USG
NL17SZ74USG by Onsemi is a CMOS latches & flip-flops IC with 8ns propagation delay, 250MHz fmax, and 32A max I (ol). Ideal for industrial applications requiring positive edge trigger and complementary output polarity. Package style: small outline, very thin profile, shrink pitch.
5962-8955101FA
J-K FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 16; Package Code: QFF; Package Shape: RECTANGULAR;
CD74HC173E
CD74HC173E by Texas Instruments is a 4-bit latch with a propagation delay of 60 ns at 4.5V, suitable for military-grade applications. It features a max frequency of 20 MHz, operates b/w -55 to 125°C, and has a power supply range of 2-6V. The package style is in-line with through-hole terminals and a tube packing method.
74LV74PW,118
D FLIP-FLOP; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
74LVC1G74DC-Q100H
NXP Semiconductors
NXP Semiconductors' 74LVC1G74DC-Q100H is a CMOS latch with 5.9ns propagation delay, suitable for automotive applications. Operating at 1.8V to 3.3V, it has a max frequency of 175MHz and AEC-Q100 screening level for reliability in harsh environments.
CD74HCT73M
Thomson Consumer Electronics
J-K FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
74LVC1G79GV,125
CD4044BE
Harris Semiconductor
R-S LATCH; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD4013BCMX
D FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
CD74ACT273E
General Electric Solid State
D FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
SN74LS279ANSR
SN74LS279ANSR by Texas Instruments is a TTL technology latch with 2 bits, 4 functions, and 30 ns propagation delay. It operates at a nominal voltage of 5V and has a load capacitance of 15 pF. Ideal for applications requiring low-level trigger type latches in commercial temperature grades.
SN74LS109AN
SN74LS109AN by Texas Instruments is a TTL technology latch with 2 functions, 35 ns propagation delay, and 15 pF load capacitance. It operates at a nominal voltage of 5V and has a max frequency of 25 MHz. Ideal for applications requiring positive edge trigger type latches in commercial temperature grades.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC100E143FNR2
D FLIP-FLOP; Temperature Grade: OTHER; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
MC100E143FNR2 by Onsemi is a D flip-flop logic IC with 9 bits and a min operating voltage of 4.2V. It has a propagation delay of 1ns and operates at temperatures up to 85°C. This chip is commonly used in applications that require fast data storage and retrieval, such as high-speed data communication systems.
MC100EP131FAR2G
MC100EP131FAR2G by Onsemi is a 4-bit latch with 0.6 ns propagation delay, operating b/w -40 to 85 °C. It has a supply voltage of 3.3V and supports positive edge trigger type. Ideal for industrial applications requiring fast data processing in compact spaces due to its low profile flatpack design and complementary output polarity.
MC100EP131FAG
MC100EP131FAG by Onsemi is a 4-bit latch with 0.6 ns propagation delay, ideal for industrial applications. It operates at -40 to 85 °C and supports Vsup from 3V to 5.5V. With positive edge trigger and complementary output polarity, it's suitable for high-speed data transfer in electronic systems.
MC100EP131FA
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: LQFP; Package Shape: SQUARE;
MC100EP131FAR2
MC100EP131FAR2 by Onsemi is a 4-bit latch with 0.6 ns propagation delay, operating at -40 to 85 °C. It has a supply voltage of 3.3V, peak reflow temp of 235C, and max frequency of 3GHz. Ideal for industrial applications requiring fast positive edge triggering in a compact flatpack design.
MC100EP131MNR4G
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
MC100EL51DTR2G
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
MC100EP52DG
MC100EP52DG by Onsemi is a small outline ECL latch with 8 terminals, operating at -40 to 85°C. It has a propagation delay of 0.38 ns and can handle up to 4 GHz frequency. Ideal for industrial applications requiring fast positive edge triggering in compact designs.
MC100EP31DTG
MC100EP451FAG
MC100EP451FAG by Onsemi is a 6-bit ECL latch with 0.55 ns propagation delay, operating at -40 to 85°C. It features positive edge trigger, complementary output polarity, and supports up to 3GHz frequency. Ideal for industrial applications requiring high-speed data processing in a compact square package.
MC100EP451FAR2
MC100EP451FAR2G
MC100EP451FAR2G by Onsemi is a 6-bit latch with 0.55 ns propagation delay, operating at -40 to 85 °C. It features positive edge trigger, complementary output polarity, and ECL technology. Ideal for high-speed applications requiring fast data processing and precise timing control.
MC100EP451MNR4G
MC100EP51DTG
MC100EP51DTG by Onsemi is a latches & flip-flops IC with 0.5 ns propagation delay, 3.3V nominal voltage, and 3000000000 Hz max frequency. Ideal for industrial applications requiring positive edge trigger type and complementary output polarity in a small outline package.
MC100EP31DG
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MC100EP131MNG
MC100EP131MNG by Onsemi is a 4-bit latch with 0.6 ns propagation delay, operating at -40 to 85 °C. It has a max frequency of 3 GHz and uses ECL technology. Ideal for industrial applications requiring fast positive edge triggering in a compact square package.
MC100EP52DTG
MC100EP52DTG by Onsemi is a latches & flip-flops IC with 3.3V nominal voltage, 0.38ns propagation delay, and 4000000000Hz max frequency. It is used in applications requiring positive edge trigger type, such as industrial temperature grade environments.
MC10EP51DTG
MC100EL31D
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved