Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC100EP196FA by Onsemi is a 32-terminal delay line with total delay of 12.2ns, ideal for industrial applications. It operates at -40 to 85 °C temperature range and uses ECL technology. With programmable feature and complementary output polarity, it suits various timing needs in electronic circuits.
Median Price
$5.400
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$4.800
1k+ parts
$4.290
10k+ parts
$4.040
Verical
$6.000
$5.362
$5.050
Digiode
$5.082
Vyrian
R&J Components
Corohmni
$4.070
Corphita
$4.815
Component Stockers USA
$5.530
$5.190
$4.700
AZTECH Wire
$19.510
Continental Prestige Electronics
$6.420
TANS Electronics
SupplyDigital Components
Kulean Microsystems
QUARKTWIN TECHNOLOGY LTD
Problanco Electronics
Microchip USA
RC Electronics
Perfect Parts
UHIMA Technologies
Provides durability and protection for the internal components, ensuring a longer lifespan for the product.
Easy to install and saves space on the PCB, making it suitable for compact electronic devices.
Compatible with common supply voltage levels in electronic devices, ensuring seamless integration.
Can withstand high temperatures, making it suitable for industrial environments where heat can be a concern.
Ability to operate in extremely cold temperatures, making it versatile for use in various environmental conditions.
Allows for customization of delays, providing flexibility in timing applications.
Delay Lines MC100EP196FA attributes and parameters. Explore more Delay Lines devices from Onsemi
Additional Features:
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Logic IC Type:
No. of Functions:
No. of Taps/Steps:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Programmable Delay Line:
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Nominal Total Delay (td):
Width:
MC100EP196FA Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 10/Oct/2012
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
DS18B20Z/T&R
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
Baneasa S A
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
MXD1013-55ESA
Analog Devices
Analog Devices' MXD1013-55ESA is a TTL delay line with 55ns total delay, suitable for industrial applications. It features 3 functions, operates at -40 to 85 °C, and has a small outline package style. With surface mount capability and 8 terminals, it offers true output polarity and dual terminal position for precise timing control.
DS1135Z-25+T&R
Analog Devices' DS1135Z-25+T&R is a delay line with 25ns propagation delay at 5V, suitable for industrial applications. It features 3 functions, operates b/w -40 to 85 °C, and has a small outline package style. With a true output polarity and 50 ohm impedance, it is ideal for surface mount designs requiring precise signal delays.
DS1100U-250+
Analog Devices' DS1100U-250+ is a delay line with 250ns propagation delay at 5V, CMOS technology, and 50 ohm output impedance. It is used in industrial applications for signal synchronization and timing control due to its small outline package and dual terminal position.
DS1100LZ-35+T
DS1100LZ-35+T by Analog Devices is a CMOS delay line with 5 taps, 35ns total delay, and 50 ohm output impedance. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package for surface mount applications.
MXD1013-12EPA
Analog Devices' MXD1013-12EPA is a TTL delay line with 3 functions, 12ns total delay, and operates in industrial temperature range. It has 8 terminals in an in-line package style for applications requiring precise signal delays. The rectangular plastic/epoxy body makes it suitable for various electronic systems.
DS1110-100
SILICON DELAY LINE; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
MXD1013-60CSA
Analog Devices' MXD1013-60CSA is a TTL delay line with 3 functions, 60ns total delay, and operates at 5V. It comes in a small outline package suitable for commercial applications requiring precise signal delays in the temperature range of 0 to 70 °C.
MXD1013-35CPA
Analog Devices' MXD1013-35CPA is a TTL delay line with 3 functions, 35ns total delay, and 5V supply voltage. It is used in commercial applications requiring precise signal delays in a compact rectangular package.
MXD1013-55CPD
Analog Devices' MXD1013-55CPD is a TTL delay line with 3 functions, total delay of 55ns, and operates b/w 0-70 °C. It comes in an in-line package style with 14 terminals for applications requiring precise signal delays in commercial temperature environments.
SY100EP195VTG-TR
Micrel
ACTIVE DELAY LINE; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
224-4
Esc Electronics
224-4 by Esc Electronics is a Delay Line with 24 terminals, offering a Nominal Total Delay of 400ns and an Output Impedance of 200Ω. Ideal for military-grade applications, it operates b/w -55°C to 125°C, featuring a rectangular plastic/epoxy package style suitable for in-line mounting.
DS1012M-V50
DS1012M-V50 by Analog Devices is a delay line with 20ns propagation delay at 5V, suitable for commercial applications. It features 2 functions, operates b/w 0-70 °C, and has 8 terminals in an in-line package style. The technology used is CMOS with a max power supply current of 70mA.
EPA1140-175
Pca Electronics
EPA1140-175 by Pca Electronics is a delay line with 175ns propagation delay at 5V, suitable for military applications. It features 8 terminals in a small outline package, surface mountable with a max operating temperature of 125°C. The technology used is TTL with true output polarity and dual terminal position.
DS1100Z-60+
DS1100Z-60+ by Analog Devices is a delay line with 60ns propagation delay, 5 taps, and CMOS technology. Ideal for industrial applications requiring precise signal delays in a compact package. With a small outline design and surface mount capability, it operates b/w -40 to 85°C temperature range.
DS1035E-30(TAPE&REEL)
SILICON DELAY LINE; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
DS1012Z-V40
DS1012Z-V40 by Analog Devices is a delay line with 25ns propagation delay at 5V. It has 8 terminals, operates b/w 0-70 °C, and draws a max of 70mA current. Ideal for applications requiring precise signal delays in commercial-grade environments.
LTC6994MPS6-1#PBF
Linear Technology
SILICON DELAY LINE; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR;
DS1100LZ-20/T+MOT
Analog Devices' DS1100LZ-20/T+MOT is a CMOS delay line with 5 taps, offering a total delay of 20ns. Operating in industrial temperatures (-40 to 85 °C), it has a small outline package and dual terminals for surface mounting applications. With a supply voltage range of 3V to 3.6V, this delay line is ideal for precision timing in various electronic systems.
LTC6994HDCB-1#TRMPBF
LTC6994HDCB-1#TRMPBF by Analog Devices is a CMOS delay line with 6 terminals, operating from -40 to 125 °C. It has a supply voltage range of 2.25V to 5.5V and programmable delay feature. Suitable for automotive applications due to its small size, surface mount package, and wide temperature grade support.
MXD1005C/D75
Analog Devices' MXD1005C/D75 is a delay line with 8 terminals, 5 taps, and total delay of 75ns. It operates b/w 0-70 °C, suitable for commercial applications. This surface-mount chip has a supply voltage range of 4.75-5.25V, making it ideal for various timing and signal processing tasks.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC100EP196FAG
MC100EP196FAG by Onsemi is a 32-terminal delay line with 1023 taps, offering a total delay of 12.2ns. Operating at -40 to 85°C, it features ECL technology and programmable delays. Ideal for industrial applications requiring precise timing control in compact designs.
MC100EP195BMNG
ACTIVE DELAY LINE; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
MC100EP195FAG
ACTIVE DELAY LINE; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: LQFP; Package Shape: SQUARE;
MC100EP195MNG
MC100EP195BFAG
MC100EP196BMNG
MC100EP196BMNG by Onsemi is a 32-terminal delay line with 1023 taps/steps and ECL technology. It offers a total delay of 12.4ns, propagation delay of 15.25ns at 3.3V, and operates in industrial temperature range (-40 to 85°C). Ideal for applications requiring precise signal timing control.
MC100EP195FAR2G
MC100EP195FAR2G by Onsemi is a delay line with 15.8ns propagation delay at 3.3V, suitable for industrial applications. It features 1023 taps/steps, ECL technology, and programmable functionality in a compact square package with GULL WING terminals. Operating temperature range from -40 to 85°C makes it ideal for various timing applications.
MC100EP195MNR4G
MC100EP195TBD
Delay Lines; Temperature Grade: OTHER; Terminal Form: J BEND; No. of Terminals: 32; Package Code: QCCJ; Power Supplies (V): -3.3/-5;
MC100E196FN
ACTIVE DELAY LINE; Temperature Grade: OTHER; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
MC100EP195BFAR2G
MC100EP196AMNG
ACTIVE DELAY LINE; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
MC100E196FNR2G
MC100E195FNR2G
MC100EP195BMNR4G
MC100E196FNG
MC100EP195FA
MC100E195FNG
MC100E195FN
MC100E195FNR2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved