Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LB1980H-MPB-E by Onsemi is a Motion Control IC with 28 terminals, operating at -20 to 70 °C. It supports power supplies of 5V and 15V, with a max supply current of 18mA. Ideal for applications requiring precise motion control in commercial-grade environments.
Median Price
$2.755
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$2.380
1k+ parts
$2.130
10k+ parts
$2.000
DigiKey
$3.130
Digiode
$2.508
Vyrian
DigiKey Marketplace
$2.750
Corphita
$2.376
Corohmni
$2.640
Advanced Electronics
$14.647
$13.329
$12.011
SupplyDigital Components
Problanco Electronics
TANS Electronics
Kulean Microsystems
Authorized Procurement Solutions
UHIMA Technologies
Continental Prestige Electronics
$2.250
Microchip USA
The use of PLASTIC/EPOXY material makes the product lightweight and durable, ideal for applications where weight and reliability are important factors.
Surface mount capability allows for easy integration into PCB designs, saving space and simplifying assembly processes.
Support for multiple power supply voltages (5V and 15V) provides flexibility in design and compatibility with different power sources.
The high number of terminals allows for versatile connectivity options and enables the IC to interface with multiple components.
With a high maximum operating temperature of 70 °C, the IC can withstand extended use in demanding environments without overheating.
The use of TIN BISMUTH terminal finish ensures good solderability and reliability during the assembly process, reducing the risk of connection issues.
The low maximum supply current of 18 mA helps in minimizing power consumption, making the product energy efficient and suitable for battery-powered applications.
BIPOLAR technology offers high precision and accuracy in motion control applications, ensuring smooth and stable operation of connected devices.
With a MSL of 3, the IC is moderately sensitive to moisture, making it suitable for use in controlled indoor environments where moisture exposure is limited.
Motion Control ICs LB1980H-MPB-E attributes and parameters. Explore more Motion Control ICs devices from Onsemi
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Sub-Category:
Maximum Supply Current (Isup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
LB1980H-MPB-E Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
Nexperia
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
TMC236B-PA
Trinamic Motion Control & Kg
TMC236B-PA by Trinamic is a Motion Control IC with 44 terminals, operating voltage of 3-5.5V, and max output current of 7A. Ideal for automotive applications due to its HVCMOS technology, it's a stepper motor controller in a low-profile flatpack package suitable for surface mount assembly.
DRV8301DCA
Texas Instruments' DRV8301DCA is a Motion Control IC with 56 terminals, operating at -40 to 125 °C. It supports supply voltages from 6V to 60V and offers a max output current of 1.7A. Ideal for automotive applications, this IC features a small outline package with gull wing terminals and nickel palladium gold finish.
FNB41560
AC MOTOR CONTROLLER; No. of Terminals: 26; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Qualification: Not Qualified;
DRV8243HQDGQRQ1
DRV8243HQDGQRQ1 by Texas Instruments is a Motion Control IC with 28 terminals, operating voltage range of 4.5V to 35V, and max output current of 12A. It is ideal for BRUSH DC MOTOR CONTROL applications, featuring AEC-Q100 screening level and BICMOS technology for automotive use at temperatures ranging from -40°C to 125°C.
IRAMX20UP60A-2
Infineon Technologies
IRAMX20UP60A-2 by Infineon Technologies is a Motion Control IC with 23 terminals, operating at temperatures from -40 to 125 °C. It has a max output current of 30 A and supports power supplies ranging from 12V to 20V. Ideal for automotive applications requiring AC motor control in a rectangular package style.
DRV3220QPHPRQ1
Texas Instruments' DRV3220QPHPRQ1 is a motion control IC with 48 terminals, suitable for automotive applications. It operates b/w -40 to 125°C and supports a supply voltage range of 4.75V to 40V. With a max output current of 1A, it features a flatpack package style and gull wing terminal form.
LMD18245T/NOPB
LMD18245T/NOPB by Texas Instruments is a Motion Control IC with 42V supply voltage, 6A output current, and BCDMOS technology. Ideal for automotive applications, this stepper motor controller operates b/w -40°C to 125°C temperature range. With a max supply voltage of 55V, it features a flange mount package style for easy installation.
DRV8801PWP
DRV8801PWP by Texas Instruments is a Motion Control IC with 32V nominal voltage, 2.8A max output current, and -40 to 85°C operating temperature range. Ideal for brush DC motor control applications, this IC comes in a small outline package with dual terminals and gull wing form.
IKCM20L60GAXKMA1
IKCM20L60GAXKMA1 by Infineon Technologies is a Motion Control IC with 24 terminals, operating voltage range of 14.5V to 18.5V, and max output current of 40A. This AC motor controller has a temp range of -40°C to 100°C, making it suitable for industrial applications requiring precise motion control in compact spaces.
A3987SLPTR-T
Allegro MicroSystems
Allegro MicroSystems' A3987SLPTR-T is a Motion Control IC with 24 terminals, operating voltage of 3-50V, and output current up to 1.5A. Ideal for stepper motor control applications due to its compact size, NMOS technology, and dual terminal position.
DRV8833CPWPR
DRV8833CPWPR by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 2.7V to 10.8V, and max output current of 1A. Ideal for brush DC motor control applications in industrial settings due to its compact size and wide temperature range from -40°C to 85°C.
TMC2160A-TA
TMC2160A-TA by Trinamic is a Motion Control IC with 48 terminals, operating voltage range of 10-50V, and temp. range of -40 to 125°C. Ideal for automotive applications, this stepper motor controller features a flatpack package style and matte tin terminal finish.
E-L6258EXTR
STMicroelectronics
E-L6258EXTR by STMicroelectronics is a Motion Control IC with 36 terminals, operating at 5V supply voltage. It features a max output current of 1.5A and uses BCDMOS technology. Ideal for applications requiring precise control of stepper motors in compact designs.
L6207PD013TR
STMicroelectronics L6207PD013TR is a Motion Control IC with 36 terminals, operating voltage of 8-52V. It features a max output current of 5.6A and BCDMOS technology. Ideal for automotive applications due to its small outline package and dual terminal position.
DRV8424EPWPR
DRV8424EPWPR by Texas Instruments is a Motion Control IC with 28 terminals, operating at -40 to 125°C. It features a max output current of 2.5A and supports stepper motor control applications. This small outline IC has a package size of 9.7mm x 4.4mm x 1.2mm, making it suitable for automotive use with a supply voltage range of 0-5.5V.
MPQ6531GV-AEC1-Z
Monolithic Power Systems
MPQ6531GV-AEC1-Z by Monolithic Power Systems is a Motion Control IC with AEC-Q100 screening. It operates at 5-60V, ideal for Brushless DC Motor control applications. This chip carrier has 28 terminals, measures 5x4mm in size, and is suitable for surface mount assembly.
L6207PD
STMicroelectronics L6207PD is a Motion Control IC with 36 terminals, operating voltage of 8-48V. It's a Stepper Motor Controller in small outline package for automotive applications, supporting max output current of 2.8A at temp range -40 to 150°C.
STSPIN820
STSPIN820 by STMicroelectronics is a Motion Control IC with 40 terminals, Vsup range of 7-45V, and Isup up to 3mA. It's a Stepper Motor Controller in a square chip carrier package suitable for surface mount applications.
PDRV8910QPWPRQ1
PDRV8910QPWPRQ1 by Texas Instruments is a Motion Control IC with 24 terminals, operating at -40 to 125 °C. It's a Brush DC Motor Controller suitable for automotive applications, featuring a supply voltage range of 3-5.5 V and compact dimensions of 7.8mm x 4.4mm x 1.2mm for surface mount assembly.
FSB50250US
FSB50250US by Onsemi is a Motion Control IC with 23 terminals, operating at 13.5-16.5V. It offers a max output current of 2.8A and peak reflow temperature of 260°C, suitable for AC motor control applications in compact microelectronic assemblies.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LB1909MC-BH
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1938FA-BH
LB1938FA-BH by Onsemi is a motion control IC with a supply voltage range of 2.2V to 10V and a max output current of 0.8A. It is commonly used as a brushless DC motor controller in various applications.
LB1946-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 28; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1973JA-AH
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1973M-TLM-E
LB1930M-TLM-E
BRUSH DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1928
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 28; Package Code: HDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1933M
STEPPER MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 14; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1933M-MPB-E
LB1920
Motion Control Electronics; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 28; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1929
LB1930MC-BH
BRUSH DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1927-E
LB1930M-TLM-H
LB1916
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 44; Package Code: QFP; Package Shape: SQUARE; Surface Mount: YES;
LB1929-E
LB1923M
Motion Control Electronics; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 44; Package Code: QFP; Package Shape: SQUARE; Surface Mount: YES;
LB1930M
LB1930MC
LB1928-E
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved