Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LB1916 by Onsemi is a Motion Control IC in a PLASTIC/EPOXY package with 44 terminals. It operates b/w -20 to 70 °C, suitable for commercial applications. With power supplies of 5V and 12V, it is ideal for motion control systems requiring precise bipolar technology.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Problanco Electronics
SupplyDigital Components
TANS Electronics
Corphita
Kulean Microsystems
UHIMA Technologies
Metaverse IC Inc.
Corohmni
Kepictronics
Assy Fe
PLASTIC/EPOXY material provides durability and protection for the components inside the package.
Surface mount capability enables easy and efficient integration onto circuit boards.
Square package shape allows for efficient use of space on the circuit board.
Support for multiple power supply options (5V and 12V) provides flexibility for different application requirements.
Having 44 terminals allows for a greater number of connections and functionality in the circuit.
Flatpack package style offers a compact form factor for space-constrained applications.
With a maximum operating temperature of 70 °C, this product can withstand high temperature environments.
Operating down to -20 °C ensures reliable performance even in colder conditions.
Quad terminal position allows for optimal connectivity and signal transmission.
Commercial temperature grade ensures compatibility with standard operating conditions in various industries.
Bipolar technology offers high performance and precision in motion control applications.
Gull wing terminal form provides secure and reliable connections on the circuit board.
With a terminal pitch of 0.8mm, this product allows for fine pitch connections in compact designs.
Motion Control ICs LB1916 attributes and parameters. Explore more Motion Control ICs devices from Onsemi
JESD-30 Code:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
LB1916 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
Comchip Technology
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
EMC2301-1-ACZL-TR
Microchip Technology
Microchip Technology's EMC2301-1-ACZL-TR is a Motion Control IC with 3.3V supply voltage, suitable for automotive applications. It features a small outline package, matte tin terminal finish, and operates b/w -40 to 125°C. Ideal for brush DC motor control with dual terminals and gull wing form factor.
SLA7076MPRT
Sanken Electric
STEPPER MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: ZIG-ZAG; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
MC33035DW
MC33035DW by Onsemi is a small outline motion control IC for brushless DC motor control. It operates at 10-20V with max output current of 0.01A. With industrial temperature grade, it's ideal for applications requiring precise motor control in compact spaces.
STK984-091A-E
STK984-091A-E by Onsemi is a Motion Control IC with 23 terminals, operating b/w -40 to 125 °C. It has a supply voltage range of 8-18 V and max current of 15 mA. Ideal for automotive applications as a Brushless DC Motor Controller in hybrid technology.
L6207D
STMicroelectronics
L6207D by STMicroelectronics is a Motion Control IC with 24 terminals, operating voltage of 8-52V, and max output current of 2.8A. Ideal for automotive applications, this BCDMOS technology-based Stepper Motor Controller offers dual terminal position in a small outline package.
A3988SJPTR-T
Allegro MicroSystems
Allegro MicroSystems' A3988SJPTR-T is a Motion Control IC with 4 functions, suitable for Stepper Motor Controller applications. It operates at 3.3V nominal voltage and supports power supplies of 3.3/5,36V. The package style includes flatpack, heat sink/slug, low profile, fine pitch design for compact integration in various electronic devices.
TMC262C-LA
Trinamic Motion Control & Kg
STEPPER MOTOR CONTROLLER; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Maximum Operating Temperature: 125 Cel;
LV8498CT-TE-L-H
LV8498CT-TE-L-H by Onsemi is a Motion Control IC with 6 terminals, operating voltage of 2.2V to 5V, and BICMOS technology. It has a thin profile package shape suitable for Voice Coil Motor Controllers. With a peak reflow temperature of 260°C, it is ideal for applications requiring precise motion control in compact spaces.
TMC223-SI
TMC223-SI by Trinamic is a small outline motion control IC for stepper motors. With 20 terminals, it operates b/w -40 to 125 °C and supports up to 0.8A output current. Ideal for automotive applications due to its matte tin finish and gull wing terminal form.
MAX14871EUE+T
Maxim Integrated
BRUSH DC MOTOR CONTROLLER; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
LB1830MC-AH
LB1830MC-AH by Onsemi is a Motion Control IC with 10 terminals, operating voltage of 3-9V. It features a max output current of 0.5A and operates b/w -20 to 80°C. Ideal for brush DC motor control applications due to its small outline package and bipolar technology.
BD6220F-E2
ROHM
ROHM's BD6220F-E2 is a Motion Control IC with 12V supply voltage, 0.5A output current, and 8 terminals. Ideal for BRUSH DC MOTOR CONTROL applications in industrial settings. Features small outline package style, dual terminal position, and peak reflow temp of 260°C.
A3967SLB-T
Allegro MicroSystems' A3967SLB-T is a Motion Control IC with 2 functions, suitable for Stepper Motor Controllers. It operates at 3-5V, has a max output current of 0.85A, and measures 15.4mm in length. The IC features bipolar technology, Gull Wing terminals, and can withstand temperatures from -20 to 85°C.
L6506D013TR
L6506D013TR by STMicroelectronics is a Motion Control IC with 20 terminals, operating at 4.5-7V. It features a small outline package, Gull Wing terminal form, and is ideal for stepper motor control applications. With dimensions of 12.8mm x 7.5mm x 2.65mm, it can withstand peak reflow temperatures up to 260°C.
STGIB8CH60TS-E
STGIB8CH60TS-E by STMicroelectronics is a Motion Control IC with 26 terminals, operating voltage range of 13.5V to 18V, and temperature range of -40°C to 125°C. It is designed for AC motor control applications in automotive systems due to its compact rectangular package style and zig-zag terminal position.
DRV8243SQDGQRQ1
DRV8243SQDGQRQ1 by Texas Instruments is a Motion Control IC with 28 terminals, operating voltage range of 4.5V to 35V, and max output current of 12A. It is ideal for BRUSH DC MOTOR CONTROL applications, featuring BICMOS technology and AEC-Q100 screening level for automotive use. The IC operates in temperatures from -40°C to 125°C, making it suitable for various industrial environments.
DRV8244HQDGQRQ1
Texas Instruments' DRV8244HQDGQRQ1 is a Motion Control IC with 28 terminals, operating from -40 to 125 °C. It features a peak output current of 21A, BICMOS technology, and AEC-Q100 screening level. Ideal for half-bridge brush DC motor control applications with Vsup ranging from 4.5V to 35V.
DRV8308RHAT
Texas Instruments' DRV8308RHAT is a Motion Control IC with 40 terminals in a square package. It operates b/w -40 to 85°C, suitable for industrial applications. With a supply voltage range of 8.5-32V and output current up to 0.13A, it serves as a Brushless DC Motor Controller in various electronic systems.
LM629M-6/NOPB
LM629M-6/NOPB by Texas Instruments is a Motion Control IC with 24 terminals, operating at 5V. It features a small outline package style and supports brush DC motor control applications. With a temperature range of -40 to 85°C, it is ideal for industrial use.
TLE5205-2GP
Infineon Technologies
TLE5205-2GP by Infineon: 6A max output current, 40V max supply voltage, BCDMOS technology. Ideal for brush DC motor control applications due to small outline package and dual terminal position. Supports supply voltages from 6V to 18V with matte tin finish and gull wing terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LB1909MC-BH
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1938FA-BH
LB1938FA-BH by Onsemi is a motion control IC with a supply voltage range of 2.2V to 10V and a max output current of 0.8A. It is commonly used as a brushless DC motor controller in various applications.
LB1946-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 28; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1973JA-AH
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1973M-TLM-E
LB1930M-TLM-E
BRUSH DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1928
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 28; Package Code: HDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1933M
STEPPER MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 14; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1933M-MPB-E
LB1920
Motion Control Electronics; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 28; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1929
LB1930MC-BH
BRUSH DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1927-E
LB1930M-TLM-H
LB1929-E
LB1923M
Motion Control Electronics; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 44; Package Code: QFP; Package Shape: SQUARE; Surface Mount: YES;
LB1930M
LB1930MC
LB1928-E
LB1916
Sanyo Electric
DISK DRIVE MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 34; Package Code: HQFP; Package Shape: SQUARE; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved