Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Texas Instruments' DRV8803DWR is a motion control IC with 20 terminals, supporting stepper motor control. It operates b/w -40 to 85°C, with a supply voltage range of 8.2V to 60V and max output current of 1.5A, making it ideal for industrial applications requiring precise motion control in compact spaces.
Median Price
$2.896
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$2.292
100+ parts
$1.893
1k+ parts
$1.023
10k+ parts
-
Mouser Electronics
$3.500
$2.180
$1.940
$1.830
DigiKey
$2.173
$2.035
Arrow
$1.457
Nova Conductors
$2.076
Digiode
$2.177
Maritex
$3.240
$1.616
Vyrian
Chip Stock
Sensible Micro Corp
Semicontronic
$1.090
$1.063
$1.057
Ampacity Inc.
Corphita
$2.063
Continental Prestige Electronics
$2.034
Argo Parts USA
Netroflash
Corohmni
$10.554
Parana Technologies
$12.469
$12.908
DigiPath Technology Company
$13.730
$12.631
IDEA Electronic Components Group
$14.010
$13.310
$12.609
ChromeModa Solutions
$11.488
Advanced Electronics
$21.325
$20.259
Perfect Parts
GreenTree Electronics
Kepictronics
Lixinc
A-Z Elektronik GmbH
Alle Elektronik GmbH
Futuretech Components
Robosynatics
Lucentia Tech
PLASTIC/EPOXY material is lightweight, durable, and cost-effective, making the product suitable for a wide range of applications.
Operating at 24V allows for efficient power consumption and compatibility with common industrial power systems.
The high maximum operating temperature ensures reliable performance in demanding industrial environments.
Compact width of 7.5mm allows for easy integration into space-constrained applications.
Support for a minimum supply voltage of 8.2V ensures that the product can operate effectively even in low voltage conditions.
The high maximum output current of 1.5A allows for driving a variety of loads, making the product versatile in motion control applications.
Industrial-grade temperature rating ensures reliable operation in harsh environmental conditions typically found in industrial settings.
Motion Control ICs DRV8803DWR attributes and parameters. Explore more Motion Control ICs devices from Texas Instruments
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
DRV8803DWR Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Alternative Wire Base 12/Sep/2018
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Continental Device India
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
DRV8436PPWPR
DRV8436PPWPR by Texas Instruments is a motion control IC with a supply voltage range of 4.5V to 48V. It features a small outline package style and is suitable for automotive applications. This IC is designed for brush DC motor control with a temperature range of -40°C to 125°C.
LM629M-8/NOPB
LM629M-8/NOPB by Texas Instruments is a Motion Control IC with 24 terminals, operating at 5V. It features a small outline package style and supports brush DC motor control applications. With a temperature range of -40 to 85°C, it is ideal for industrial use cases requiring precise motion control.
STGIB8CH60TS-E
STGIB8CH60TS-E by STMicroelectronics is a Motion Control IC with 26 terminals, operating voltage range of 13.5V to 18V, and temperature range of -40°C to 125°C. It is designed for AC motor control applications in automotive systems due to its compact rectangular package style and zig-zag terminal position.
SLA7078MPRT
Allegro MicroSystems
Allegro MicroSystems' SLA7078MPRT is a Motion Control IC with 23 terminals, operating voltage of 5V, and output current up to 3A. Ideal for stepper motor control applications, it has a temperature range from -20°C to 85°C and supports supply voltages from 3V to 5.5V.
DRV8434PPWPR
DRV8434PPWPR by Texas Instruments is a Motion Control IC with 28 terminals, operating voltage range of 4.5V to 24V, and max output current of 2.5A. Ideal for automotive applications due to its compact size, high temperature tolerance up to 125°C, and dual terminal position design.
LV8811G-AH
LV8811G-AH by Onsemi is a Motion Control IC with 20 terminals, operating at -40 to 105 °C. It supports Brushless DC motors, with a max output current of 2A and Vsup range from 3.6V to 16V. Ideal for industrial applications requiring precise motor control in compact spaces.
DRV10987SPWPR
DRV10987SPWPR by Texas Instruments is a Motion Control IC for BLDC motors. It operates at 6.2-28V with 3A output current, suitable for automotive applications. With a compact design of 7.8mm length and 4.4mm width, it features a temperature range of -40 to 125°C for robust performance.
LV8813G-AH
LV8813G-AH by Onsemi is a Motion Control IC with 20 terminals, operating voltage range of 6-16V. It's a Brushless DC Motor Controller suitable for industrial applications, offering max output current of 2A and low supply current of 7mA.
VNHD7008AYTR
STMicroelectronics' VNHD7008AYTR is a Motion Control IC with 36 terminals, suitable for BRUSH DC MOTOR CONTROL. It operates at 4-28V, delivering up to 51A output current. AEC-Q100 screening ensures reliability in automotive applications.
IRAMY20UP60B
International Rectifier
AC MOTOR CONTROLLER; No. of Terminals: 18; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Supply Voltage (Vsup): 15 V;
UC3625DW
UC3625DW by Texas Instruments is a motion control IC with 28 terminals, operating at 12V. It features a small outline package style, suitable for brushless DC motor controllers. With a max output current of 2A and bipolar technology, it is ideal for commercial applications requiring precise motion control.
NCV7535DBR2G
NCV7535DBR2G by Onsemi is a Motion Control IC with 20 terminals, operating at a nominal voltage of 5V. It features a small outline package style and is designed for brush DC motor control applications. The IC has a max seated height of 1.1mm and can withstand peak reflow temperatures up to 260°C.
LV8413GP-TE-L-H
LV8413GP-TE-L-H by Onsemi is a Motion Control IC in PLASTIC/EPOXY package with 16 terminals. Operates at -20 to 85°C, with 3.3/5V supplies and BICMOS technology. Ideal for motion control applications requiring low supply current and high peak reflow temperatures.
DRV8873SPWPRQ1
DRV8873SPWPRQ1 by Texas Instruments is a motion control IC with a nominal voltage of 13.5V and a max operating temperature of 125°C. It is used as a brush DC motor controller in automotive applications.
VNH3SP30
VNH3SP30 by STMicroelectronics is a Motion Control IC with 2 functions, suitable for BRUSH DC MOTOR CONTROL. It operates at 9-36 V and can handle up to 30 A output current. This small outline IC in plastic/epoxy package is surface mountable and has dual terminal position.
BD1754HFN-TR
ROHM
ROHM's BD1754HFN-TR is a motion control IC with 1 function, suitable for brush DC motor control. It operates at a nominal voltage of 3.6V and has a small outline, very thin profile package style. With a temperature range of -30 to 85°C, it offers precise control in various applications.
MC33035DWR2G
MC33035DWR2G by Onsemi is a Brushless DC Motor Controller IC with 24 terminals. It operates b/w -40 to 85°C, with Vsup ranging from 10V to 30V. This small outline package is ideal for motion control applications requiring a max output current of 0.1A.
TMC223-SI
Trinamic Motion Control & Kg
TMC223-SI by Trinamic is a small outline motion control IC for stepper motors. With 20 terminals, it operates b/w -40 to 125 °C and supports up to 0.8A output current. Ideal for automotive applications due to its matte tin finish and gull wing terminal form.
DRV8801QRTYRQ1
DRV8801QRTYRQ1 by Texas Instruments is a Motion Control IC with a supply voltage range of 8-38V and max output current of 2.8A. This NMOS technology chip carrier is suitable for automotive applications, featuring a wide operating temperature range from -40 to 125°C. With surface mount capability and quad terminals, it offers precise control for brush DC motor controllers.
STGIPQ8C60T-HZ
STMicroelectronics' STGIPQ8C60T-HZ is a Motion Control IC with 26 terminals, operating b/w -40°C to 125°C. It features a nominal voltage range of 13.5V to 18V, making it ideal for automotive applications as an AC motor controller in hybrid technology.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DRV8301DCA
Texas Instruments' DRV8301DCA is a Motion Control IC with 56 terminals, operating at -40 to 125 °C. It supports supply voltages from 6V to 60V and offers a max output current of 1.7A. Ideal for automotive applications, this IC features a small outline package with gull wing terminals and nickel palladium gold finish.
DRV8701PRGER
DRV8701PRGER by Texas Instruments is a Motion Control IC with 24 terminals in a square package. It operates b/w -40 to 125°C, suitable for automotive applications. With a supply voltage range of 5.9-45V and peak current of 9.5mA, it's ideal for stepper motor control systems.
DRV8871DDARQ1
DRV8871DDARQ1 by Texas Instruments is a Motion Control IC with 8 terminals and a supply voltage range of 6.8V to 45V. It operates in automotive-grade temperatures from -40°C to 125°C, making it suitable for brush DC motor control applications. With a max output current of 3.5A, this IC is designed for compact designs requiring high performance in harsh environments.
DRV8825PWP
DRV8825PWP by Texas Instruments is a motion control IC with 2.5A output current and 24V nominal voltage. Ideal for brush DC motor control, it operates in industrial temperature range (-40 to 85°C) and features small outline package style.
DRV8801AQRMJRQ1
DRV8801AQRMJRQ1 by Texas Instruments is a Motion Control IC with 16 terminals in a square chip carrier package. It operates b/w -40 to 125°C, suitable for automotive applications. This DMOS technology controller has a max output current of 2.8A, making it ideal for brush DC motor control in compact designs.
DRV8412DDWR
DRV8412DDWR by Texas Instruments is a Motion Control IC with 2 functions, operating at a supply voltage range of 12-50V. This IC is ideal for Stepper Motor Controllers, featuring a max output current of 15A and terminal finish of Ni/Pd/Au. With a compact package style and industrial temperature grade, it offers precise control in various applications.
DRV8711DCP
DRV8711DCP by Texas Instruments is a motion control IC with a nominal voltage of 24V. It is a stepper motor controller with a max operating temperature of 85°C, making it suitable for industrial applications. Its compact size and surface mount capability make it easy to integrate into various systems.
DRV8301DCAR
Texas Instruments' DRV8301DCAR is a Motion Control IC with 56 terminals and a supply voltage range of 6-60V. Ideal for automotive applications, it offers a max output current of 1.7A, operating temperatures from -40 to 125°C, and surface-mount compatibility in a small outline package.
DRV8833CPWPR
DRV8833CPWPR by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 2.7V to 10.8V, and max output current of 1A. Ideal for brush DC motor control applications in industrial settings due to its compact size and wide temperature range from -40°C to 85°C.
DRV8432DKDR
Texas Instruments' DRV8432DKDR is a Motion Control IC with 2 functions, suitable for Stepper Motor Controllers. It operates at -40 to 85°C, supports a max output current of 15A, and has a nominal voltage of 50V. The package style is small outline with gull wing terminals and measures 15.9mm in length.
DRV8412DDW
Texas Instruments' DRV8412DDW is a Motion Control IC with 44 terminals and 2 functions. It operates b/w -40 to 85 °C, supporting a supply voltage range of 0-50 V. Ideal for industrial applications, it offers a max output current of 15 A and peak reflow temperature of 260 C.
DRV8825PWPR
DRV8825PWPR by Texas Instruments is a Motion Control IC with 2.5A output current and 24V nominal voltage. Ideal for brush DC motor control, it operates in industrial temperature range (-40 to 85°C) and supports surface mount installation.
DRV8701ERGER
DRV8701ERGER by Texas Instruments is a Motion Control IC with 24 terminals, operating voltage of 5.9-45V, and temp range of -40 to 125°C. Ideal for automotive applications, it features a compact square package with nickel/palladium/gold finish and no-lead terminals for precise stepper motor control.
DRV8711DCPR
DRV8711DCPR by Texas Instruments is a motion control IC with a nominal voltage of 24V. It features a small outline package style, dual terminal position, and can operate in industrial temperature grades. This stepper motor controller has a max supply voltage of 52V and is suitable for applications requiring precise motion control in various industries.
DRV8873HPWPRQ1
Texas Instruments' DRV8873HPWPRQ1 is a Motion Control IC with 24 terminals, operating voltage range of 4.5V to 38V, and temp grade for automotive applications. It features a small outline package with heat sink, suitable for brush DC motor control in harsh environments up to 125°C. The IC's nickel palladium gold finish ensures reliable performance in various conditions.
DRV8872DDARQ1
DRV8872DDARQ1 by Texas Instruments is a Motion Control IC with 24V nominal voltage and 3.5A max output current. Ideal for automotive applications, it features AEC-Q100 screening level, -40 to 125°C operating temperature range, and GULL WING terminal form.
DRV8302DCAR
DRV8302DCAR by Texas Instruments is a Motion Control IC with 56 terminals, operating voltage of 6-60V, and max output current of 1.7A. Ideal for automotive applications, it features a temp range of -40 to 125°C and terminal finish in NiPdAu.
DRV8870DDAR
DRV8870DDAR by Texas Instruments is a motion control IC with 8 terminals and a supply voltage range of 6.5V to 45V. It offers a max output current of 3.6A, making it suitable for brush DC motor control applications in automotive environments. With a compact rectangular package style and low profile design, it can operate in temperatures ranging from -40°C to 125°C.
DRV8701ERGET
Texas Instruments DRV8701ERGET is a Motion Control IC with 24 terminals, operating voltage of 5.9-45V, and temp range -40 to 125°C. Ideal for automotive applications as a stepper motor controller due to its compact square package and low supply current of 9.5mA.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved