Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DRV8847PWR by Texas Instruments is a motion control IC with a nominal voltage of 12V, suitable for automotive applications. It features a small outline package with dual terminals and can operate in temperatures ranging from -40 to 125°C. With a min supply voltage of 2.7V, this stepper motor controller is ideal for compact designs requiring precise motion control.
Median Price
$1.530
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Texas Instruments
1+ parts
100+ parts
$1.264
1k+ parts
$0.683
10k+ parts
-
Mouser Electronics
$2.760
$1.690
$1.520
$1.410
DigiKey
$1.411
Nova Conductors
$1.154
Digiode
$1.454
Chip Stock
Vyrian
Cyclops Electronics Ltd
Argo Parts USA
Continental Prestige Electronics
$1.131
Semicontronic
$1.300
$1.268
$1.261
Ampacity Inc.
Corphita
$1.377
Parana Technologies
$8.858
$9.542
DigiPath Technology Company
$9.754
$8.974
ChromeModa Solutions
$9.953
$8.161
IDEA Electronic Components Group
$9.455
$8.958
Corohmni
$15.870
GreenTree Electronics
ChipstoGo Electronic ltd
QUARKTWIN TECHNOLOGY LTD
Kepictronics
Lixinc
A-Z Elektronik GmbH
Alle Elektronik GmbH
Authorized Procurement Solutions
Netroflash
$1.097
$1.073
PLASTIC/EPOXY material makes the package durable and resistant to shocks, making it suitable for various applications.
Surface mount capability allows for easy and convenient installation on PCBs, saving space and facilitating automated assembly processes.
Operates at a standard voltage level of 12V, making it compatible with a wide range of power supply setups.
High maximum operating temperature of 125°C ensures reliable performance even in harsh operating conditions.
Low minimum operating temperature of -40°C allows for operation in cold environments without compromising performance.
Nickel/Palladium/Gold terminal finish provides excellent conductivity and corrosion resistance, ensuring stable connections over time.
Compact width of 4.4mm allows for space-efficient PCB layout and integration into tight spaces.
Supports a low minimum supply voltage of 2.7V, enabling operation in low-power scenarios and conserving energy.
High peak reflow temperature of 260°C ensures reliable solder connections during manufacturing processes.
Designed for automotive applications, meeting specific requirements and standards for reliability and performance in automotive environments.
Motion Control ICs DRV8847PWR attributes and parameters. Explore more Motion Control ICs devices from Texas Instruments
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
DRV8847PWR Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - DRV8847 Datasheet Chg 9/Sep/2019 Design 22/Feb/2022
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
Bkc Semiconductors
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
Silicon Standard
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
Nexperia
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
POWERSTEP01
POWERSTEP01 by STMicroelectronics is a Motion Control IC with 89 terminals, operating at temperatures from -25°C to 125°C. It features a nominal voltage of 3.3V and comes in a rectangular chip carrier package style. Ideal for stepper motor control applications due to its surface mount capability and matte tin terminal finish.
BD6231F-E2
ROHM
ROHM's BD6231F-E2 is a Motion Control IC with 24V supply voltage, 1A output current, and -40 to 85°C operating temperature range. Ideal for industrial applications requiring brush DC motor control in compact spaces due to its small outline package and dual terminal position.
STGIPS10K60T
STGIPS10K60T by STMicroelectronics is a Motion Control IC with 25 terminals, operating voltage range of 13.5V to 18V, and temperature grade suitable for automotive applications. It features a rectangular package style made of plastic/epoxy material, ideal for AC motor control in microelectronic assemblies with dimensions of 44.4mm x 22mm x 7.5mm (LxWxH).
DRV8424PPWPR
Texas Instruments DRV8424PPWPR is a Motion Control IC with 28 terminals, operating at -40 to 125 °C. It's a Stepper Motor Controller with max output current of 2.5 A, suitable for automotive applications due to its compact size and high temp tolerance.
TLE94112ELXUMA1
TLE94112ELXUMA1 by Infineon is a Motion Control IC with 24 terminals, operating voltage of 3-5.5V, and max output current of 2A. Ideal for industrial applications like brush DC motor control due to its small size (8.65mm x 3.9mm), low profile design, and temp range of -40 to 85°C.
TMC262C-LA
Analog Devices
Analog Devices' TMC262C-LA is a Motion Control IC with 32 terminals, operating voltage range of 5-60 V, and max output current of 10 A. Ideal for stepper motor control applications, it features a compact square package shape, low profile design (0.9 mm), and high temp tolerance (-40 to 125°C).
MC33035DW
Motorola
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DRV8312DDWR
DRV8312DDWR by Texas Instruments is a Motion Control IC with 44 terminals, operating at -40 to 85 °C. It supports supply voltages of 10.8-52.5 V and output current up to 6.5 A, making it ideal for industrial brush DC motor control applications. The package is small outline with heat sink/slug, suitable for surface mount assembly in various electronic systems.
DRV8462DDWR
DRV8462DDWR by Texas Instruments is a Motion Control IC with 44 terminals and a supply voltage range of 4.5V to 65V. It features a max output current of 5A, operating temperature from -40°C to 125°C, and is ideal for stepper motor control applications.
A4984SLPTR-T
A4984SLPTR-T by Allegro MicroSystems is a motion control IC with a supply voltage range of 3V to 5.5V and max output current of 2A. It is commonly used as a stepper motor controller in various applications.
L6219DS
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DRV8906QPWPRQ1
DRV8906QPWPRQ1 by Texas Instruments is a Motion Control IC with 24 terminals, operating at -40 to 125 °C. It is an AEC-Q100 grade IC for automotive applications, supporting a supply voltage range of 3-5.5 V. This BRUSH DC MOTOR CONTROLLER features a small outline package with gull wing terminals and thin profile design.
DRV2605YZFR
DRV2605YZFR by Texas Instruments is a Motion Control IC with 9 terminals and a supply voltage range of 2.5V to 5.5V. It features a max output voltage of 5.5V, operates in industrial temperature grades (-40°C to 85°C), and is suitable for brush DC motor control applications due to its thin profile grid array package style.
DRV8821DCAR
DRV8821DCAR by Texas Instruments is a Motion Control IC with 2 functions, suitable for Stepper Motor Controllers. It operates at a supply voltage range of 8-32V and can handle a max output current of 1.5A. This industrial-grade IC comes in a small outline package with gull wing terminals.
A4954ELPTR-T
Allegro MicroSystems' A4954ELPTR-T is a Motion Control IC with 16 terminals, operating voltage range of 8-40V, and max output current of 2A. Ideal for industrial applications requiring precise control over brush DC motors. Package style: Small Outline, Heat Sink/Slug, Thin Profile.
AMT49413GEVATR
Allegro MicroSystems' AMT49413GEVATR is a Motion Control IC with 48 terminals, suitable for Brushless DC Motor Controllers. It operates b/w -40°C to 105°C, with Vsup ranging from 7V to 45V. The chip carrier package style has a very thin profile and matte tin finish, making it ideal for industrial applications.
TMC262C-LA-T
Trinamic Motion Control & Kg
STEPPER MOTOR CONTROLLER; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Length: 5 mm;
FSB50450A
Fairchild Semiconductor
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Length: 29 mm; Nominal Supply Voltage (Vsup): 15 V;
IRAMY20UP60B
International Rectifier
AC MOTOR CONTROLLER; No. of Terminals: 18; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Supply Voltage (Vsup): 15 V;
BA6845FSE2
ROHM's BA6845FSE2 is a motion control IC with 1 function. It operates at a nominal voltage of 5V and has a max output current of 1A. This IC, with its small outline package and low profile, is suitable for brush DC motor control applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV8301DCA
Texas Instruments' DRV8301DCA is a Motion Control IC with 56 terminals, operating at -40 to 125 °C. It supports supply voltages from 6V to 60V and offers a max output current of 1.7A. Ideal for automotive applications, this IC features a small outline package with gull wing terminals and nickel palladium gold finish.
DRV8701PRGER
DRV8701PRGER by Texas Instruments is a Motion Control IC with 24 terminals in a square package. It operates b/w -40 to 125°C, suitable for automotive applications. With a supply voltage range of 5.9-45V and peak current of 9.5mA, it's ideal for stepper motor control systems.
DRV8871DDARQ1
DRV8871DDARQ1 by Texas Instruments is a Motion Control IC with 8 terminals and a supply voltage range of 6.8V to 45V. It operates in automotive-grade temperatures from -40°C to 125°C, making it suitable for brush DC motor control applications. With a max output current of 3.5A, this IC is designed for compact designs requiring high performance in harsh environments.
DRV8825PWP
DRV8825PWP by Texas Instruments is a motion control IC with 2.5A output current and 24V nominal voltage. Ideal for brush DC motor control, it operates in industrial temperature range (-40 to 85°C) and features small outline package style.
DRV8801AQRMJRQ1
DRV8801AQRMJRQ1 by Texas Instruments is a Motion Control IC with 16 terminals in a square chip carrier package. It operates b/w -40 to 125°C, suitable for automotive applications. This DMOS technology controller has a max output current of 2.8A, making it ideal for brush DC motor control in compact designs.
DRV8412DDWR
DRV8412DDWR by Texas Instruments is a Motion Control IC with 2 functions, operating at a supply voltage range of 12-50V. This IC is ideal for Stepper Motor Controllers, featuring a max output current of 15A and terminal finish of Ni/Pd/Au. With a compact package style and industrial temperature grade, it offers precise control in various applications.
DRV8711DCP
DRV8711DCP by Texas Instruments is a motion control IC with a nominal voltage of 24V. It is a stepper motor controller with a max operating temperature of 85°C, making it suitable for industrial applications. Its compact size and surface mount capability make it easy to integrate into various systems.
DRV8301DCAR
Texas Instruments' DRV8301DCAR is a Motion Control IC with 56 terminals and a supply voltage range of 6-60V. Ideal for automotive applications, it offers a max output current of 1.7A, operating temperatures from -40 to 125°C, and surface-mount compatibility in a small outline package.
DRV8833CPWPR
DRV8833CPWPR by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 2.7V to 10.8V, and max output current of 1A. Ideal for brush DC motor control applications in industrial settings due to its compact size and wide temperature range from -40°C to 85°C.
DRV8432DKDR
Texas Instruments' DRV8432DKDR is a Motion Control IC with 2 functions, suitable for Stepper Motor Controllers. It operates at -40 to 85°C, supports a max output current of 15A, and has a nominal voltage of 50V. The package style is small outline with gull wing terminals and measures 15.9mm in length.
DRV8412DDW
Texas Instruments' DRV8412DDW is a Motion Control IC with 44 terminals and 2 functions. It operates b/w -40 to 85 °C, supporting a supply voltage range of 0-50 V. Ideal for industrial applications, it offers a max output current of 15 A and peak reflow temperature of 260 C.
DRV8825PWPR
DRV8825PWPR by Texas Instruments is a Motion Control IC with 2.5A output current and 24V nominal voltage. Ideal for brush DC motor control, it operates in industrial temperature range (-40 to 85°C) and supports surface mount installation.
DRV8701ERGER
DRV8701ERGER by Texas Instruments is a Motion Control IC with 24 terminals, operating voltage of 5.9-45V, and temp range of -40 to 125°C. Ideal for automotive applications, it features a compact square package with nickel/palladium/gold finish and no-lead terminals for precise stepper motor control.
DRV8711DCPR
DRV8711DCPR by Texas Instruments is a motion control IC with a nominal voltage of 24V. It features a small outline package style, dual terminal position, and can operate in industrial temperature grades. This stepper motor controller has a max supply voltage of 52V and is suitable for applications requiring precise motion control in various industries.
DRV8873HPWPRQ1
Texas Instruments' DRV8873HPWPRQ1 is a Motion Control IC with 24 terminals, operating voltage range of 4.5V to 38V, and temp grade for automotive applications. It features a small outline package with heat sink, suitable for brush DC motor control in harsh environments up to 125°C. The IC's nickel palladium gold finish ensures reliable performance in various conditions.
DRV8872DDARQ1
DRV8872DDARQ1 by Texas Instruments is a Motion Control IC with 24V nominal voltage and 3.5A max output current. Ideal for automotive applications, it features AEC-Q100 screening level, -40 to 125°C operating temperature range, and GULL WING terminal form.
DRV8302DCAR
DRV8302DCAR by Texas Instruments is a Motion Control IC with 56 terminals, operating voltage of 6-60V, and max output current of 1.7A. Ideal for automotive applications, it features a temp range of -40 to 125°C and terminal finish in NiPdAu.
DRV8870DDAR
DRV8870DDAR by Texas Instruments is a motion control IC with 8 terminals and a supply voltage range of 6.5V to 45V. It offers a max output current of 3.6A, making it suitable for brush DC motor control applications in automotive environments. With a compact rectangular package style and low profile design, it can operate in temperatures ranging from -40°C to 125°C.
DRV8701ERGET
Texas Instruments DRV8701ERGET is a Motion Control IC with 24 terminals, operating voltage of 5.9-45V, and temp range -40 to 125°C. Ideal for automotive applications as a stepper motor controller due to its compact square package and low supply current of 9.5mA.
DRV8873SPWPRQ1
DRV8873SPWPRQ1 by Texas Instruments is a motion control IC with a nominal voltage of 13.5V and a max operating temperature of 125°C. It is used as a brush DC motor controller in automotive applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved