Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LB1928-E by Onsemi is a Motion Control IC with 24V nominal voltage. It features 28 terminals, operates b/w -20 to 80 °C, and has a max supply current of 30mA. Ideal for applications requiring bipolar technology and commercial extended temperature grade.
Median Price
$1.413
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$1.260
1k+ parts
$1.130
10k+ parts
$1.060
DigiKey
$1.660
Verical
$1.325
Vyrian
$1.240
Digiode
$1.330
Corohmni
Corphita
QUARKTWIN TECHNOLOGY LTD
Continental Prestige Electronics
$1.200
Kulean Microsystems
Problanco Electronics
SupplyDigital Components
TANS Electronics
Microchip USA
UHIMA Technologies
The use of plastic/epoxy material provides durability and protection for the IC, ensuring optimal performance even in harsh environments.
The 24V supply voltage allows for compatibility with a wide range of systems and applications, making it a versatile choice for various projects.
The high number of terminals provides ample connectivity options, allowing for complex motion control configurations and enhanced functionality.
With a maximum operating temperature of 80 °C, this IC can withstand high temperatures, ensuring reliable performance under demanding conditions.
The bipolar technology used in this IC offers high-speed operation and precise control, making it suitable for applications requiring accurate motion control.
Motion Control ICs LB1928-E attributes and parameters. Explore more Motion Control ICs devices from Onsemi
JESD-30 Code:
JESD-609 Code:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Maximum Supply Current (Isup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
LB1928-E Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 19/Dec/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
Vishay Sprague
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
2N7002-7-F
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
DRV8231ADDAR
DRV8231ADDAR by Texas Instruments is a Motion Control IC with 8 terminals and a supply voltage range of 4.5V to 33V. It offers a max output current of 3.7A, suitable for brush DC motor control applications. With a small outline package style and low profile design, it operates in temperatures ranging from -40°C to 150°C.
PDRV8874QPWPRQ1
PDRV8874QPWPRQ1 by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 4.5V to 37V, and max output current of 6A. Designed for automotive applications, it has AEC-Q100 screening level and temp range from -40°C to 125°C.
TC642EOA
Microchip TC642EOA is a Motion Control IC with 8 terminals, operating voltage of 3.3/5V, and temp range of -40 to 85°C. Ideal for Brushless DC Motor control applications due to its small outline package and industrial temperature grade suitability. Features include matte tin terminal finish, dual position, and gull wing form factor.
DRV8307RHAR
Texas Instruments DRV8307RHAR is a Motion Control IC in a square chip carrier package. With 40 terminals, it operates b/w -40 to 125°C and supports brushless DC motor control. It has a supply voltage range of 8.5-32V and low supply current of 18mA, making it ideal for automotive applications.
A4984SLPTR-T
Allegro MicroSystems
A4984SLPTR-T by Allegro MicroSystems is a motion control IC with a supply voltage range of 3V to 5.5V and max output current of 2A. It is commonly used as a stepper motor controller in various applications.
TLE52062SAKSA1
Infineon Technologies
TLE52062SAKSA1 by Infineon is a BCDMOS Motion Control IC with 6A max output current. It operates at 6-40V, suitable for brush DC motor control applications. This rectangular IC has 7 terminals and a flange mount package style.
LTC1695CS5#TRMPBF
Analog Devices
LTC1695CS5#TRMPBF by Analog Devices is a Motion Control IC with 5V nominal voltage, suitable for Brushless DC Motor Controller applications. It features a small outline package style, matte tin terminal finish, and operates b/w 0°C to 70°C temperature range. Ideal for compact designs requiring precise motion control in commercial-grade environments.
DRV2605LTDGSRQ1
Texas Instruments' DRV2605LTDGSRQ1 is a Motion Control IC with 10 terminals, operating from -40 to 105°C. It supports supply voltages from 2V to 5.2V and outputs up to 5.5V for industrial applications like brush DC motor control in automotive systems.
SLA7076MPR
Sanken Electric
STEPPER MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: ZIG-ZAG;
LM629M-6
National Semiconductor
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TC647VPA
Telcom Semiconductor
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: DUAL;
DRV8835DSSR
DRV8835DSSR by Texas Instruments is a motion control IC with 12 terminals, operating voltage of 3-5V, and max output current of 1.5A. Ideal for brush DC motor control applications, it has a small outline package shape and can operate in industrial temperature range from -40 to 85°C.
STGIB10CH60TS-LZ
AC MOTOR CONTROLLER;
IRMCF188TY
Infineon's IRMCF188TY is a Motion Control IC for automotive applications. It operates at 3-3.6V with 64 terminals in a low-profile flatpack package. With a temp range of -40 to 125°C, it's ideal for brushless DC motor control systems in vehicles.
UC3625DWTR
UC3625DWTR by Texas Instruments is a motion control IC with 12V nominal voltage and 2A max output current. Ideal for brushless DC motor control, it features a small outline package, dual terminal position, and operates b/w 0-70°C.
DRV8332DKD
Texas Instruments' DRV8332DKD is a Motion Control IC with 36 terminals, suitable for BRUSH DC MOTOR CONTROL. It operates at -40 to 85°C, with Vsup ranging from 10.8V to 52.5V and max output current of 13A. The package style is SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH in RECTANGULAR shape made of PLASTIC/EPOXY material.
LV8728MR-AH
LV8728MR-AH by Onsemi is a Motion Control IC with 30 terminals, operating voltage range of 9-32V. It offers 2A output current, suitable for Stepper Motor control applications. With compact dimensions (15.2mm x 7.9mm x 2.45mm), it can operate in temperatures from -30°C to 85°C efficiently.
IRSM836-044MA
International Rectifier
AC MOTOR CONTROLLER; No. of Terminals: 36; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES; Qualification: Not Qualified;
BA6846FVE2
ROHM
ROHM's BA6846FVE2 is a Motion Control IC with 5V supply voltage, 0.5A output current, and 14 terminals. Ideal for BRUSH DC MOTOR CONTROL applications, it operates b/w -25 to 70°C with a compact rectangular package style. Suitable for surface mount assembly, this IC offers precise control in various motion control systems.
DRV8243PQDGQRQ1
Texas Instruments' DRV8243PQDGQRQ1 is a Motion Control IC with 28 terminals, suitable for BRUSH DC MOTOR CONTROL. It operates b/w -40 to 125 °C and supports a max output current of 12 A. The IC features BICMOS technology, GULL WING terminal form, and has a supply voltage range from 4.5 V to 35 V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LB1909MC-BH
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1938FA-BH
LB1938FA-BH by Onsemi is a motion control IC with a supply voltage range of 2.2V to 10V and a max output current of 0.8A. It is commonly used as a brushless DC motor controller in various applications.
LB1946-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 28; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1973JA-AH
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1973M-TLM-E
LB1930M-TLM-E
BRUSH DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1928
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 28; Package Code: HDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1933M
STEPPER MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 14; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1933M-MPB-E
LB1920
Motion Control Electronics; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 28; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1929
LB1930MC-BH
BRUSH DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1927-E
LB1930M-TLM-H
LB1916
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 44; Package Code: QFP; Package Shape: SQUARE; Surface Mount: YES;
LB1929-E
LB1923M
Motion Control Electronics; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 44; Package Code: QFP; Package Shape: SQUARE; Surface Mount: YES;
LB1930M
LB1930MC
Sanyo Electric
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 28; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved