Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LB1933M by Onsemi is a Motion Control IC with 14 terminals, operating voltage of 1.8-7.5V, and output current up to 1A. It is a Stepper Motor Controller in a small outline package suitable for commercial extended temperature applications. With surface mount capability and dual terminal position, it offers precise control for various motion control systems.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Problanco Electronics
Kulean Microsystems
TANS Electronics
SupplyDigital Components
UHIMA Technologies
Corphita
Corohmni
This material provides durability and protection for the IC, ensuring a longer lifespan for the product.
Allows for easy and efficient mounting on circuit boards, saving time and effort during assembly.
Compatible with a wide range of applications that require a 3V supply voltage.
Can operate in higher temperature environments without overheating, increasing the versatility of the product.
Capable of delivering a high output current, making it suitable for driving motors or other high-power devices.
Motion Control ICs LB1933M attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
LB1933M Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
LAN8720A-CP-TR
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
M24308/2-1F
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
DRV8353SRTAR
DRV8353SRTAR by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage range of 9-75V. It features a max output current of 1A, suitable for automotive applications. The IC has a compact square package shape and can withstand temperatures from -40 to 125°C.
PDRV8847SPWR
STEPPER MOTOR CONTROLLER;
IRMCK311TY
International Rectifier
Motion Control Electronics; Temperature Grade: INDUSTRIAL; No. of Terminals: 64; Package Code: QFP; Package Shape: SQUARE; Surface Mount: YES;
E-L6219DSA
STMicroelectronics E-L6219DSA is a Motion Control IC with 24 terminals, operating at -40 to 125 °C. It has a supply voltage range of 4.75-5.25 V and can handle up to 1A output current. Ideal for automotive applications due to its small outline package and bipolar technology.
L6202
Sprague Electric
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
DRV8434PWPR
DRV8434PWPR by Texas Instruments is a Motion Control IC with 28 terminals and a supply voltage range of 4.5V to 48V. It features a max output current of 2.5A, operating temperature from -40°C to 125°C, and is ideal for stepper motor control applications due to its bipolar technology and compact rectangular package design.
PSS15S92F6-AG
Mitsubishi Electric
AC MOTOR CONTROLLER;
STGIB15CH60TS-L
STGIB15CH60TS-L by STMicroelectronics is a Motion Control IC with 26 terminals, operating voltage range of 13.5V to 18V, and max output current of 40A. Ideal for automotive applications due to its temperature grade and AC motor controller type, this rectangular package IC offers precise control in compact microelectronic assembly designs.
DRV8305NQPHPRQ1
Texas Instruments' DRV8305NQPHPRQ1 is a Motion Control IC with 48 terminals in a square package. It operates b/w -40 to 125°C, suitable for automotive applications. With a max output current of 1A and support for brushless DC motor control, it's ideal for compact designs requiring precise motion control.
DRV8880PWPR
DRV8880PWPR by Texas Instruments is a motion control IC with a supply voltage range of 6.5-45V and max output current of 2.5A. It features a small outline package, suitable for automotive applications, with operating temperatures from -40 to 125°C. This stepper motor controller has 28 terminals and is surface mountable, making it ideal for compact designs requiring precise motion control.
FSBB20CH60CL
Fairchild Semiconductor
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): FLANGE MOUNT;
L293B
Sgs-ates Componenti Electronici S P A
Motion Control Electronics; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Pitch: 2.54 mm;
DRV8834RGET
DRV8834RGET by Texas Instruments is a Motion Control IC with 2.5-10.8V supply, 2.2A output current, and -40 to 85°C operating temp. Ideal for brush DC motor control applications due to its compact square package and quad terminal position.
A3950SEUTR-T
Allegro MicroSystems
Allegro MicroSystems' A3950SEUTR-T is a Motion Control IC with 8-36V power supplies, 2.8A output current, and -20 to 85°C operating temperature range. Ideal for Brushless DC Motor control applications due to its compact square package and quad terminal position.
FSB50450BS
FSB50450BS by Onsemi is a Motion Control IC with 23 terminals, operating b/w -40 to 150 °C. It has a max output current of 5 A and supports AC motor control applications. The IC is surface mountable, with a rectangular package style and nominal voltage range of 13.5-16.5 V.
AMT49413KEVSR-J
AMT49413KEVSR-J by Allegro MicroSystems is a Motion Control IC with a Nominal Voltage of 7.4V, suitable for Brushless DC Motor Controllers. It features a Square Package Shape, 48 Terminals in a Chip Carrier style, and operates within temperatures ranging from -40 to 150°C. Ideal for applications requiring precise motion control in compact spaces.
DRV10983ZPWPR
DRV10983ZPWPR by Texas Instruments is a Motion Control IC for BLDC motors with 24V nominal voltage and 3A max output current. It features a small outline package, dual terminal position, and automotive temperature grade suitability. Ideal for applications requiring precise motor control in compact spaces.
STSPIN32F0601Q
BRUSHLESS DC MOTOR CONTROLLER;
PSS35S92F6-AG
Mitsubishi Electric's PSS35S92F6-AG is a Motion Control IC with 24 terminals in RECTANGULAR package. It features AC MOTOR CONTROLLER type, 6mm max seated height, and 38x24 mm dimensions. Ideal for applications requiring precise motor control in compact spaces.
L6207D013TR
STMicroelectronics L6207D013TR is a Motion Control IC with 48V supply voltage, 5.6A output current, and BCDMOS technology. Ideal for automotive applications, it features a small outline package, dual terminals, and operates b/w -40 to 150°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LB1838M-TRM-E
STEPPER MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 14; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1909MC-BH
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1938FA-BH
LB1938FA-BH by Onsemi is a motion control IC with a supply voltage range of 2.2V to 10V and a max output current of 0.8A. It is commonly used as a brushless DC motor controller in various applications.
LB1946-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 28; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1973JA-AH
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1973M-TLM-E
LB1930M-TLM-E
BRUSH DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1928
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 28; Package Code: HDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1933M-MPB-E
LB1920
Motion Control Electronics; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 28; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB1929
LB1930MC-BH
BRUSH DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1927-E
LB1930M-TLM-H
LB1916
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 44; Package Code: QFP; Package Shape: SQUARE; Surface Mount: YES;
LB1929-E
LB1923M
Motion Control Electronics; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 44; Package Code: QFP; Package Shape: SQUARE; Surface Mount: YES;
LB1930M
LB1930MC
LB1928-E
LB1933M
Sanyo Electric
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved