Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DTA6C-N by Onsemi is a TRIAC with 1.5V max on-state voltage, 50mA max DC gate trigger current, and 2mA max leakage current. It operates b/w -40 °C to 125°C, ideal for AC power control applications like dimmers and motor speed controllers.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Native Components
$0.379
$0.364
Northwest PG Solutions
$0.417
$0.368
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
Corphita
UHIMA Technologies
Corohmni
TANS Electronics
Low on-state voltage helps in reducing power losses and increases efficiency of the device.
The high gate trigger current ensures reliable and quick switching of the device.
Low leakage current improves the overall performance and reliability of the product.
Wide operating temperature range allows the product to function in various environments without overheating.
Having a TRIAC trigger device type ensures precise control over switching and operation of the product.
High RMS on-state current capability makes the product suitable for high-power applications.
Low gate trigger voltage allows for efficient triggering and control of the device.
High peak off-state voltage ensures safe operation and protection against voltage spikes.
Having a high rate of rise of commutation voltage helps in reducing switching losses and improving efficiency.
The maximum holding current ensures stable operation and prevents false triggering of the device.
Triode For Alternating Current (TRIAC) DTA6C-N attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Onsemi
Minimum Critical Rate of Rise of Commutation Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
Maximum Leakage Current:
Maximum On-state Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Trigger Device Type:
DTA6C-N Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
Vishay Intertechnology
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510K0FKEA
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
Formosa Microsemi
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DTC12C-N
DTC12C-N by Onsemi is a TRIAC with 1.5V max on-state voltage, 30mA max DC gate trigger current, and 2mA max leakage current. It operates b/w -40 °C to 125°C and has a max RMS on-state current of 12A. Ideal for applications requiring reliable switching in AC circuits.
BTA140-600,127
NXP Semiconductors
NXP Semiconductors' BTA140-600,127 is a TRIAC with 25A RMS current, 600V off-state voltage, and 35mA gate trigger current. Ideal for AC power control applications due to its 4-quadrant logic level triac design. Package: PLASTIC/EPOXY, Terminals: THROUGH-HOLE, Operating Temp: 125°C.
BTA10-600GPRG
STMicroelectronics
STMicroelectronics' BTA10-600GPRG is a TRIAC with 600V repetitive peak off-state voltage, 10A max RMS on-state current, and 50mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
MAC228A10G
MAC228A10G by Onsemi is a TRIAC with 800V repetitive peak off-state voltage, 8A max RMS on-state current, and 10mA max DC gate trigger current. Ideal for applications requiring precise AC power control in various electronic devices.
MAC4DCMT4G
Littelfuse
TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
SYAL114
SYAL114 by Onsemi is a TRIAC with 1.8V max on-state voltage, 40mA max DC gate trigger current, and 1mA max leakage current. It is used as a trigger device in applications requiring up to 200V repetitive peak off-state voltage and 5 V/us min critical rate of rise of commutation voltage.
MAC4DSM-1
MAC4DSM-1 by Onsemi is a TRIAC with 600V repetitive peak off-state voltage and 4A max RMS on-state current. It has a 10mA max DC gate trigger current and operates b/w -40 to 125 °C. Ideal for AC power control applications requiring reliable switching capabilities.
T2500DG
T2500DG by Onsemi is a single TRIAC with 3 terminals, featuring a max RMS on-state current of 6A and a repetitive peak off-state voltage of 400V. Ideal for applications requiring a trigger device with 4 quadrant logic level TRIAC configuration, such as in AC power control systems.
MAC12SMG
MAC12SMG by Onsemi is a single TRIAC with 3 terminals, featuring a max RMS on-state current of 12A and repetitive peak off-state voltage of 600V. Ideal for applications requiring a trigger device with 4 quadrant logic level TRIAC configuration, operating b/w -40 to 110°C.
MAC97A6RLRP
MAC97A6RLRP by Onsemi is a TRIAC with 3 terminals, max. DC gate trigger current of 5mA, and max. RMS on-state current of 0.6A. It is used in applications requiring a 4 quadrant logic level TRIAC for AC switching operations up to 400V and operating temperatures from -40 °C to 110°C.
Z0107MN0,135
Ween Semiconductors
TRIAC; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Minimum Critical Rate of Rise of Off-state Voltage: 100 V/us; Maximum Leakage Current: .5 mA; Maximum DC Gate Trigger Voltage: 1.3 V;
Z0107MARLRFG
Z0107MARLRFG by Onsemi is a single TRIAC with 1A RMS on-state current, 600V repetitive peak off-state voltage, and 5mA max DC gate trigger current. It is used in applications requiring 4-quadrant logic level TRIACs for AC power control.
2N6073AG
2N6073AG by Onsemi is a TRIAC with max DC gate trigger current of 20mA, RMS on-state current of 4A, and repetitive peak off-state voltage of 400V. It is used in applications requiring a single quadrant logic level TRIAC for AC switching tasks.
ACST435-8BTR
ACST435-8BTR by STMicroelectronics is a TRIAC with 4A RMS on-state current, 800V repetitive peak off-state voltage, and 35mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
BTA40-800B
Continental Device India
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ISOLATED;
T1635H-6I
T1635H-6I by STMicroelectronics is a snubberless TRIAC with 600V repetitive peak off-state voltage, 16A max RMS on-state current, and 35mA max DC gate trigger current. It is used in applications requiring AC switching such as dimmers, motor speed control, and heating regulation.
BTA40-800B by STMicroelectronics is a TRIAC with 315A peak current, 40A RMS current, and 1.5V gate trigger voltage. Ideal for AC power control applications, it operates b/w -40 to 125°C temperature range in a plastic package with solder lug terminals.
BTA16-800SW3G
BTA16-800SW3G by Onsemi is a single TRIAC with 16A max RMS on-state current, 800V repetitive peak off-state voltage, and 10mA max DC gate trigger current. Ideal for applications requiring precise AC power control in various electronic devices.
MAC997A8RLRP
MAC997A8RLRP by Onsemi is a single TRIAC with 600V repetitive peak off-state voltage, 0.8A max RMS on-state current, and 5mA max DC gate trigger current. Ideal for applications requiring precise AC power control in industrial equipment, lighting systems, and home appliances.
TIC206D
Texas Instruments
TIC206D by Texas Instruments is a TRIAC with 3 terminals, max. RMS on-state current of 3A, and max. DC gate trigger voltage of 2V. It operates b/w -40 to 110°C, ideal for AC power control in various applications like dimmers and motor speed controllers.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DTA6C
TRIAC; Surface Mount: NO; Minimum Operating Temperature: -40 Cel; Maximum Leakage Current: 2 mA; Repetitive Peak Off-state Voltage: 200 V; Maximum Operating Temperature: 125 Cel;
DTA6E
TRIAC; Surface Mount: NO; Maximum Holding Current: 50 mA; Maximum On-state Voltage: 1.5 V; Maximum RMS On-state Current: 6 A; Maximum Operating Temperature: 125 Cel;
DTA6E-N
TRIAC; Surface Mount: NO; Maximum Operating Temperature: 125 Cel; Maximum On-state Voltage: 1.5 V; Maximum Leakage Current: 2 mA; Repetitive Peak Off-state Voltage: 400 V;
DTA6G
TRIAC; Surface Mount: NO; Maximum Holding Current: 50 mA; Maximum DC Gate Trigger Voltage: 2 V; Repetitive Peak Off-state Voltage: 600 V; Minimum Operating Temperature: -40 Cel;
DTA6G-N
TRIAC; Surface Mount: NO; Maximum Operating Temperature: 125 Cel; Minimum Critical Rate of Rise of Commutation Voltage: 10 V/us; Maximum RMS On-state Current: 6 A; Maximum DC Gate Trigger Current: 50 mA;
DTA6-N
TRIAC; Surface Mount: NO; Repetitive Peak Off-state Voltage: 200 V; Maximum RMS On-state Current: 6 A; Maximum DC Gate Trigger Voltage: 2 V; Maximum On-state Voltage: 1.5 V;
Sanyo Electric
TRIAC; Surface Mount: NO; JESD-609 Code: e0; Maximum On-state Voltage: 1.5 V; Minimum Critical Rate of Rise of Commutation Voltage: 10 V/us; Maximum DC Gate Trigger Current: 50 mA;
TRIAC; Surface Mount: NO; Maximum Leakage Current: 2 mA; Repetitive Peak Off-state Voltage: 400 V; Maximum DC Gate Trigger Voltage: 2 V; Terminal Finish: Tin/Lead (Sn/Pb);
TRIAC; Surface Mount: NO; Minimum Critical Rate of Rise of Commutation Voltage: 10 V/us; Maximum DC Gate Trigger Voltage: 2 V; Minimum Operating Temperature: -40 Cel; Terminal Finish: Tin/Lead (Sn/Pb);
DTA6C-N
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; No. of Terminals: 3;
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel;
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved