Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CAT64LC10SI-TE13 by Onsemi is a 1024-bit EEPROM with 64x16 organization, operating at 3.3V. It features SPI serial bus type, 1MHz clock frequency, and hardware/software write protection. Ideal for industrial applications requiring small outline packages and low power consumption.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Native Components
$10.780
Northwest PG Solutions
$11.858
$10.672
SupplyDigital Components
Kulean Microsystems
Problanco Electronics
TANS Electronics
UHIMA Technologies
Corohmni
Corphita
This material provides durability and protects the internal components of the EEPROM, ensuring a longer lifespan.
Allows for easy installation on circuit boards, saving space and improving the overall design.
Synchronous operation ensures efficient data transfer and communication with other components in the system.
Operates at a common voltage level, making it compatible with a wide range of systems and devices.
Can withstand high temperatures, suitable for industrial applications where heat dissipation is important.
Offers a high memory density in a compact package, ideal for storing important data in a small footprint.
Withstands a significant number of write/erase cycles, ensuring reliability and longevity of the EEPROM.
EEPROM CAT64LC10SI-TE13 attributes and parameters. Explore more EEPROM devices from Onsemi
Additional Features:
Maximum Clock Frequency (fCLK):
Minimum Data Retention Time:
Endurance:
JESD-30 Code:
JESD-609 Code:
Length:
Memory Density:
Memory IC Type:
Memory Width:
No. of Functions:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Output Characteristics:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Parallel or Serial:
Power Supplies (V):
Qualification:
Maximum Seated Height:
Serial Bus Type:
Maximum Standby Current:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Maximum Write Cycle Time (tWC):
Write Protection:
CAT64LC10SI-TE13 Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.51
SB
8542.32.00.50
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
LIS2DH12TR
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
SS14
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
24FC64FT-I/OT
The Microchip Technology 24FC64FT-I/OT is an EEPROM with 8KX8 organization, operating at 1 MHz clock frequency. It features I2C control byte 1010DDDR and offers a memory density of 65536 bit. Ideal for industrial applications requiring reliable data storage with up to 1000000 write/erase cycles.
AT28C256-15SU
Atmel
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP28,.4;
AT24C512C-XHD-T
AT24C512C-XHD-T by Microchip Technology is a 64KX8 EEPROM with I2C control byte. It operates at 5V, has 524288 bit memory density, and supports up to 1MHz clock frequency. Ideal for industrial applications requiring reliable data storage with 1000000 write/erase cycles endurance.
24FC1026-I/SN
24FC1026-I/SN by Microchip Technology is an EEPROM with 128KX8 organization, 1 MHz clock frequency, and 1000000 Write/Erase cycles. It operates in industrial temperature range and uses I2C serial bus for applications requiring reliable non-volatile memory storage.
24LC64-I/SNRVA
24LC64-I/SNRVA by Microchip Technology is an EEPROM with 8KX8 organization, operating at 5V. It has a memory density of 65536 bit and operates on I2C serial bus. With a max clock frequency of 0.4 MHz, it is ideal for industrial applications requiring reliable non-volatile memory storage.
AT24C64B-10TU-2.7
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Organization: 8KX8;
DS2433S/T&R
Maxim Integrated
DS2433S/T&R by Maxim Integrated is a 1-WIRE EEPROM with 4Kx1 organization, operating at 5V. It offers 50,000 write/erase cycles and operates in industrial temperature range (-40 to 85 °C). Ideal for applications requiring reliable non-volatile memory storage in compact designs.
24AA1025-I/SM
24AA1025-I/SM by Microchip Technology is an EEPROM with 128KX8 organization, 1048576 bit memory density, and 1000000 Write/Erase Cycles endurance. It operates in synchronous mode at a max clock frequency of 0.4 MHz. Ideal for industrial applications requiring reliable non-volatile memory storage.
24LC512-I/P
24LC512-I/P by Microchip Technology is an EEPROM with 64KX8 organization, operating at 0.4 MHz clock frequency. It features a hardware write protection and can endure 1000000 Write/Erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage.
25LC512-I/SN
25LC512-I/SN by Microchip Technology is a serial EEPROM with 64KX8 organization, SPI interface, and 20 MHz clock frequency. It operates at -40 to 85 °C with 5V programming voltage. Ideal for industrial applications requiring high endurance of 1000000 cycles and small outline package style.
24C01C-I/P
24C01C-I/P by Microchip Technology is a 1024-bit EEPROM with 128x8 organization, operating at 5V. It features I2C control byte 1010DDDR and offers endurance of 1M write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact rectangular package.
24LC32A/SN
24LC32A/SN by Microchip Technology is a small outline EEPROM with 4Kx8 organization, I2C control byte 1010DDDR, and hardware write protection. It operates at 3.3V, has a max clock frequency of 0.1 MHz, and offers 1000000 write/erase cycles. Ideal for applications requiring low power consumption and secure data storage in commercial temperature environments.
AT25320B-SSHL-T
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Write Cycle Time (tWC): 5 ms;
24LC128T-E/ST
24LC128T-E/ST by Microchip is an EEPROM with 16KX8 organization, 131072 bit memory density, and 1000000 Write/Erase Cycles endurance. Operating in the automotive temperature grade range of -40 to 125 °C, it features I2C serial bus type for applications requiring reliable non-volatile memory storage. With a compact form factor of 4.4mm x 3mm and low standby current of 0.000005A, it's ideal for space-constrained automotive electronics.
M24512-DRDW3TP/K
STMicroelectronics M24512-DRDW3TP/K is an EEPROM with 64KX8 organization, operating at 2.5V, and AEC-Q100 screening for automotive applications. It features I2C serial bus type, 1MHz clock frequency, and 4000000 write/erase cycles endurance. Ideal for automotive systems requiring reliable non-volatile memory in a small outline package.
DS1990A-F5+
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 2; Package Shape: ROUND; Maximum Operating Temperature: 85 Cel; Maximum Supply Voltage (Vsup): 6 V;
DS2431P/T&R
DS2431P/T&R by Maxim Integrated is a 1024-bit EEPROM with 1-WIRE serial bus, offering 50k write/erase cycles. Operating at -40 to 85°C, it has a supply voltage range of 2.8-5.25V and is ideal for industrial applications requiring reliable non-volatile memory storage.
24AA025E48-E/SN
24AA025E48-E/SN by Microchip Technology is an EEPROM with 256x8 organization, operating at 5V. It has a max clock frequency of 0.4 MHz and endurance of 1M write/erase cycles. Ideal for automotive applications due to its TS16949 screening level and small outline package style.
DS2430AP+
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: SOC; Package Shape: RECTANGULAR; Package Equivalence Code: SOC6,.17;
AT24CS01-STUM-T
Microchip Technology's AT24CS01-STUM-T is a 2048x8 EEPROM with I2C control byte. Operating at 1 MHz, it offers 1000000 write/erase cycles and -40 to 85°C temperature range. Ideal for industrial applications requiring reliable non-volatile memory storage in compact form factor.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CAT64LC10U
EEPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Memory Width: 16;
CAT64LC10PA
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Maximum Standby Current: .000003 Amp;
CAT64LC10JI-TE13
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Form: GULL WING;
CAT64LC10S
EEPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G8;
CAT64LC10LI
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Terminal Pitch: 2.54 mm;
CAT64LC10UA
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Technology: CMOS;
CAT64LC10JA
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CAT64LC10PI
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Memory Width: 16;
CAT64LC10J-TE13
EEPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Clock Frequency (fCLK): 1 MHz;
CAT64LC10SI
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; No. of Words Code: 64;
CAT64LC10SA
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
CAT64LC10LA
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Terminal Form: THROUGH-HOLE;
CAT64LC10S-TE13
EEPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CAT64LC10JI
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Width: 3.9 mm;
CAT64LC10P
EEPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
CAT64LC10J
EEPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Data Retention Time: 100;
CAT64LC10JA-TE13
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;
CAT64LC10L
EEPROM; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
CAT64LC10SA-TE13
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
CAT64LC10SI-2.5TE13
Catalyst Semiconductor
EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Technology: CMOS;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved