Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BTA30H-600CW3G by Onsemi is a single TRIAC with 30A max RMS on-state current and 600V repetitive peak off-state voltage. Ideal for applications requiring isolated case connection, such as motor control systems or lighting dimmers. Operating temperature range from -40 to 150 °C ensures reliable performance in various environments.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Component Stockers USA
$99.990
SupplyDigital Components
Kulean Microsystems
TANS Electronics
Northwest PG Solutions
Corphita
Native Components
UHIMA Technologies
Corohmni
Perfect Parts
Microchip USA
Problanco Electronics
Provides durability and protection for the internal components of the TRIAC.
Allows for efficient and reliable triggering of the TRIAC.
Simplifies the installation and use of the TRIAC in electronic circuits.
Facilitates easy and secure mounting on PCBs without the need for special tools.
Ensures minimal power loss and helps in maintaining high efficiency.
Provides essential connection points for the TRIAC in the circuit.
Enables convenient mounting in various electronic devices and equipment.
Ensures reliable operation even in high-temperature environments.
Offers efficient and precise control over the switching of the TRIAC.
Ensures functionality even in extreme cold conditions.
Provides a good conductive surface for secure electrical connections.
Handles high current loads with ease, making it suitable for various applications.
Requires low trigger voltage, improving energy efficiency.
Ensures safety by isolating the external case from the internal circuit.
Handles high voltage levels, making it suitable for industrial applications.
Provides reliable and fast switching performance.
Helps in maintaining the ON state of the TRIAC, enhancing stability in the circuit.
Triode For Alternating Current (TRIAC) BTA30H-600CW3G attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Onsemi
Case Connection:
Configuration:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Maximum Leakage Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
BTA30H-600CW3G Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DTM12G-N
DTM12G-N by Onsemi is a TRIAC with 1.5V max on-state voltage, 30mA max DC gate trigger current, and 2mA max leakage current. It operates b/w -40 °C to 125°C, ideal for AC power control applications requiring up to 12A RMS on-state current and 600V repetitive peak off-state voltage.
2N6073A
Central Semiconductor
TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; JESD-30 Code: R-PSFM-T3;
BT136S-600D
BT136S-600D by NXP Semiconductors is a single TRIAC with a max RMS on-state current of 4A and repetitive peak off-state voltage of 600V. It is designed for applications requiring a trigger device with a max DC gate trigger current of 5mA, such as in AC power control circuits.
SC265M2
Powerex
TRIAC; Surface Mount: NO; Repetitive Peak Off-state Voltage: 800 V; Maximum DC Gate Trigger Voltage: 2.5 V; Maximum Leakage Current: 1 mA; Minimum Critical Rate of Rise of Off-state Voltage: 20 V/us;
MAC15A8
MAC15A8 by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 15A max RMS on-state current, and 50mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
BT136S-600F,118
BT136S-600F,118 by NXP Semiconductors is a TRIAC with a max RMS On-state Current of 4A and a Repetitive Peak Off-state Voltage of 600V. It is used in applications requiring 4-quadrant logic level triggering and can handle high operating temperatures up to 125°C.
MAC223A10
MAC223A10 by Onsemi is a single TRIAC with 25A RMS on-state current and 800V repetitive peak off-state voltage. It operates b/w -40 to 125 °C, ideal for 4 quadrant logic level TRIAC applications. The device has a max DC gate trigger current of 50mA and trigger voltage of 2V, making it suitable for various AC control systems.
MAC218A10FP
MAC218A10FP by Onsemi is a single TRIAC with 800V repetitive peak off-state voltage and 8A max RMS on-state current. It operates b/w -40 to 125 °C, suitable for 4 quadrant logic level applications. The package style is flange mount with through-hole terminals, UL recognized for various AC control systems.
MAC97A8RLRPG
MAC97A8RLRPG by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 0.6A max RMS on-state current, and 5mA max DC gate trigger current. Ideal for applications requiring precise AC power control such as dimmer switches, motor speed controls, and heating regulation.
TIC225S
TIC225S by Texas Instruments is a TRIAC with 15mA DC Gate Trigger Current, 8A RMS On-state Current, and 700V Repetitive Peak Off-state Voltage. It operates b/w -40°C to 110°C, ideal for AC power control in various applications like lighting dimmers and motor speed controllers.
TIC236B
TIC236B by Texas Instruments is a TRIAC with 12A RMS current, 200V repetitive peak off-state voltage, and 50mA DC gate trigger current. It is used in applications requiring 4-quadrant logic level TRIACs for AC switching tasks. Operating temperature ranges from -40 to 110°C, making it suitable for various industrial and consumer electronics.
MAC97-8RLRM
MAC97-8RLRM by Onsemi is a TRIAC with 1.9V max on-state voltage, 0.6A max RMS current, and 600V repetitive peak off-state voltage. It operates b/w -40 to 110 °C and is ideal for AC power control applications due to its high gate trigger current of 10mA.
2N6071
Semitronics
TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Maximum DC Gate Trigger Voltage: 2.5 V;
BTA16-600BW3G
Littelfuse
SNUBBERLESS TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
T810-600G-TR
T810-600G-TR by STMicroelectronics is a single TRIAC with 10mA DC gate trigger current, 8A RMS on-state current, and 600V repetitive peak off-state voltage. It is used in applications requiring 4-quadrant logic level TRIACs for AC switching at temperatures ranging from -40°C to 125°C.
BTA316-800B,127
BTA316-800B,127 by NXP Semiconductors is a TRIAC with a max RMS on-state current of 16A and a repetitive peak off-state voltage of 800V. It is commonly used in applications requiring 4 quadrant logic level TRIACs, such as motor control and lighting systems.
TIC263M
TIC263M by Texas Instruments is a TRIAC with 600V repetitive peak off-state voltage, 25A max RMS on-state current, and 2.5V max DC gate trigger voltage. Ideal for AC power control applications due to its 4-quadrant logic level TRIAC configuration and -40°C to 110°C operating temperature range in a plastic/epoxy package style.
MAC9NG
MAC9NG by Onsemi is a TRIAC with 3 terminals, max. RMS on-state current of 8A, and max. DC gate trigger voltage of 1.5V. It operates b/w -40 to 125 °C and is ideal for AC power control applications due to its high repetitive peak off-state voltage of 800V and low leakage current of 2mA.
BT138-600E
Ween Semiconductors
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
BTA16-600CW3G
BTA16-600CW3G by Onsemi is a single TRIAC with 16A RMS on-state current and 600V repetitive peak off-state voltage. Ideal for AC power control applications, it features a max operating temperature of 125°C and snubberless trigger device type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BTA316-800B0,127
BTA316-800B0,127 by NXP Semiconductors is a TRIAC with 800V repetitive peak off-state voltage and 16A max RMS on-state current. It operates b/w -40 to 150°C, with a max gate trigger current of 50mA. Ideal for AC power control applications.
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Current: 50 mA; Minimum Operating Temperature: -40 Cel; Repetitive Peak Off-state Voltage: 800 V; Maximum DC Gate Trigger Voltage: 1.5 V;
BTA316-800B
BTA316-800B0
SNUBBERLESS TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
BTA312X-600B,127
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
BTA30-600CW3G
BTA30-800CW3G
BTA30H-800CW3G
BTA310-600E,127
TRIAC; Surface Mount: NO; Minimum Critical Rate of Rise of Off-state Voltage: 50 V/us; Minimum Operating Temperature: -40 Cel; Maximum On-state Voltage: 1.5 V; Maximum DC Gate Trigger Voltage: 1.5 V;
BTA310-800C
4 QUADRANT LOGIC LEVEL TRIAC; JESD-609 Code: e3; Terminal Finish: TIN;
BTA310-800E
4 QUADRANT LOGIC LEVEL TRIAC; Terminal Finish: TIN; JESD-609 Code: e3;
BTA310-800C,127
TRIAC; Surface Mount: NO; JESD-609 Code: e3; Maximum DC Gate Trigger Current: 35 mA; Maximum Leakage Current: .5 mA; Terminal Finish: Tin (Sn);
BTA310-800D
BTA310-800D,127
TRIAC; Surface Mount: NO; Minimum Critical Rate of Rise of Off-state Voltage: 20 V/us; JESD-609 Code: e3; Repetitive Peak Off-state Voltage: 800 V; Maximum RMS On-state Current: 10 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved