Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Micron Technology's MT41K512M16VRP-107AAT:P is a DDR3L DRAM with 512MX16 organization, operating at 934.57 MHz. It features a thin profile grid array package suitable for automotive applications due to AEC-Q100 screening and common I/O type.
Median Price
$21.330
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Farnell
1+ parts
$17.800
100+ parts
$13.690
1k+ parts
-
10k+ parts
Mouser Electronics
$19.440
$15.840
$15.020
Arrow
Verical
Element14
$29.360
$24.440
Newark
$159.250
Digiode
$11.742
Nova Conductors
$19.614
Chip Stock
Cyclops Electronics Ltd
Vyrian
NAC Semi
$21.990
Sensible Micro Corp
Aztec Data Supply Inc.
$5.250
Corohmni
$5.388
Semicontronic
$9.920
$9.672
$9.622
Ampacity Inc.
$10.510
Corphita
$11.124
Continental Prestige Electronics
$18.930
$18.551
Bastille Electronics
$19.610
$18.630
$17.453
Argo Parts USA
A-Z Elektronik GmbH
GreenTree Electronics
Robosynatics
Plastic/Epoxy material ensures durability and reliability of the product, making it suitable for various applications.
Surface Mount feature allows for easy and convenient installation on circuit boards, saving time and effort during production.
Synchronous operation ensures precise timing and coordination between memory and processor, enhancing overall system performance.
Optimal supply voltage ensures efficient power consumption while maintaining stable performance levels.
High maximum operating temperature range allows for reliable performance under varying environmental conditions.
DDR3L DRAM technology provides high-speed data transfer rates, making it ideal for demanding applications such as gaming or multimedia editing.
DRAM MT41K512M16VRP-107AAT:P attributes and parameters. Explore more DRAM devices from Micron Technology
Access Mode:
Additional Features:
Maximum Clock Frequency (fCLK):
Input/Output Type:
Interleaved Burst Length:
JESD-30 Code:
Length:
Memory Density:
Memory IC Type:
Memory Width:
No. of Functions:
No. of Ports:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Refresh Cycles:
Screening Level:
Maximum Seated Height:
Self Refresh:
Sequential Burst Length:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
MT41K512M16VRP-107AAT:P Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.36
SB
8542.32.00.23
Micron Technology, Inc. is a leading provider of cutting-edge semiconductor solutions and products, based in Boise, Idaho. Founded in 1978, the company manufactures dynamic random-access memory (DRAM), flash memory, USB flash drives and other storage solutions used by a wide range of businesses and consumers around the world. With more than 35,000 employees worldwide and a $20 billion market capitalization as of 2019, Micron has remained at the forefront of technological innovation for over 40 years. The company's products are used in enterprise applications such as networking and data centers; mobile computing devices including smartphones and tablets; personal computers; automotive electronics; embedded systems; gaming consoles; imaging systems; industrial manufacturing processes; medical devices; military systems and more.
President, CEO
Sanjay Mehrotra
Executive VP, CFO
Mark J. Murphy
Executive VP, CBO
Sumit Sadana
Fab 4
Fabrication
Fab Initiation
1994
USA
Boise
Wafer Capacity
8,750
Fab 6
1997
Manassas
23,000
2006
28,000
Fab 11
2007
Taiwan
Taoyuan
34,000
Fab 16 A1
Taichung
50,000
Fab 16 A3
2021
3,000
Fab 15
2002
Japan
Hiroshima
98,000
2004
New Hiroshima DRAM Fab
2017
11,750
Fab 10W
2016
Singapore
20,000
Fab 10X
55,000
2019
18,000
Fab 10A
Fab 10N
2014
47,000
2000
32,000
2012
6,000
Fab 16 A2
2015
43,000
New Clay Fab Phase 1
2027
Clay
New Boise Fab 1
2025
Fab 16 A5
2028
Expansion Fab
2020
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Promax-johnton
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Bytesonic Electronics
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Fairchild Semiconductor
Panjit International
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
K4S561632C-TC75
Samsung
Samsung's K4S561632C-TC75 is a 16MX16 Synchronous DRAM with 3.3V supply, operating at 133MHz clock frequency. Ideal for commercial applications, it offers 16777216 words memory density and supports four bank page burst access mode.
MT48LC16M16A2P-7EIT:G
Micron Technology
Micron Technology's MT48LC16M16A2P-7EIT:G is a 16MX16 Synchronous DRAM with 3.3V supply, operating at 143MHz. It features common I/O type, self-refresh mode, and industrial temperature grade. Ideal for applications requiring fast memory access in harsh environments.
K4B1G1646G-BCH9
Samsung's K4B1G1646G-BCH9 DDR3 DRAM features 64MX16 organization, 667 MHz clock frequency, and 67108864 words capacity. Ideal for high-performance applications requiring fast memory access and data processing with a max standby current of 0.01 Amp.
MT48LC16M16A2P-7E:D
Micron Technology's MT48LC16M16A2P-7E:D is a 16MX16 Synchronous DRAM with 16777216 words. It operates at 143 MHz, has a memory density of 268435456 bit, and supports a max clock frequency of 143 MHz. Ideal for applications requiring fast data access and storage in commercial-grade environments.
MT41K128M16JT-107IT:KTR
Micron Technology's MT41K128M16JT-107IT:KTR is a DDR3L DRAM with 128MX16 organization, operating at 934.5 MHz clock frequency. It features a thin profile grid array package suitable for industrial applications requiring high memory density and common I/O type.
MT48LC4M32B2F5-7IT:GTR
Micron Technology's MT48LC4M32B2F5-7IT:GTR is a 3.3V, 4MX32 Synchronous DRAM with 85°C max temp. Ideal for industrial applications, it features self-refresh mode, very thin profile package style, and operates in synchronous mode with a memory width of 32 bits.
IS42S32400F-6BLI-TR
Integrated Silicon Solution
IS42S32400F-6BLI-TR by Integrated Silicon Solution is a 4MX32 DRAM with 3.3V supply, 166 MHz clock frequency, and -40 to 85°C operating range. Ideal for industrial applications requiring high memory density and fast access times in a grid array package.
S27KS0642GABHV020
Infineon Technologies
S27KS0642GABHV020 by Infineon Technologies is a 8MX8 DRAM with synchronous operation, self-refresh capability, and 200 MHz clock frequency. It is ideal for applications requiring high-speed memory access in compact devices due to its very thin profile package style and common I/O type.
MT53E256M16D1FW-046WT:B
LPDDR4 DRAM;
MT47H64M16NF-25E:MTR
MT47H64M16NF-25E:MTR by Micron Technology is a 1.8V DDR2 DRAM with 64M words and 16-bit memory width. It operates synchronously, has self-refresh capability, and can withstand temperatures up to 85°C. It is commonly used in applications requiring high-speed data storage and retrieval, such as computer systems and networking devices.
IS43LR16800G-6BLI-TR
IS43LR16800G-6BLI-TR by Integrated Silicon Solution is an 8MX16 DDR1 DRAM with a memory density of 134217728 bits. It operates synchronously at a max temperature of 85°C and has a self-refresh mode. This thin-profile, fine-pitch package is ideal for industrial applications requiring fast access times and low power consumption.
MT48LC16M16A2BG-75:D
Micron Technology's MT48LC16M16A2BG-75:D is a 16MX16 Synchronous DRAM with 3.3V supply, operating at 133MHz clock frequency. It features a very thin profile grid array package suitable for commercial applications requiring fast access time of 5.4ns and supports common I/O type with self-refresh capability.
MT40A512M16LY-062EAUT:ETR
MT40A512M16LY-062EAUT:ETR by Micron Technology is a DDR4 DRAM with 512MX16 organization, operating at a max clock frequency of 1600 MHz. It is commonly used in applications requiring high-speed and synchronous memory access, such as servers, workstations, and high-performance computing systems.
KM44C256AP-8
Samsung's KM44C256AP-8 is a 256Kx4 DRAM with 80ns access time, operating at 5V. It features fast page access mode and 512 refresh cycles, suitable for commercial temperature grade applications. With a memory density of 1048576 bits, it offers common I/O type and through-hole terminal form.
MT53E2G32D4DE-046WT:C
MT53E256M32D2DS-053AAT:B
Micron Technology's MT53E256M32D2DS-053AAT:B is a LPDDR4 DRAM with 256MX32 organization, operating at 1866 MHz. It features synchronous operation, self-refresh capability, and common I/O type. Ideal for applications requiring high-speed memory access in automotive electronics due to AEC-Q100 screening level.
W631GG6NB12I
Winbond Electronics
W631GG6NB12I by Winbond Electronics is a DDR3 DRAM with 64MX16 organization, operating at up to 800 MHz clock frequency. It features a 1.5V nominal voltage and offers a memory density of 1073741824 bits. This industrial-grade DRAM is suitable for applications requiring high-speed synchronous memory operations.
KM44V16100AS-5
Samsung's KM44V16100AS-5 is a 16MX4 DRAM with 3.3V supply, operating in asynchronous mode. It features 70°C max temp, 50ns access time, and 16777216 words capacity. Ideal for applications requiring fast page access and common I/O type in a compact thin profile package.
MT48LC8M16A2P-6A:L
Micron Technology's MT48LC8M16A2P-6A:L is a 3.3V Synchronous DRAM with 8MX16 organization, operating at up to 167 MHz clock frequency. It features common I/O type, self-refresh mode, and supports four-bank page burst access. Ideal for commercial applications requiring high-speed memory with low power consumption.
W631GG6NB-12
Winbond Electronics' W631GG6NB-12 is a DDR3 DRAM with 64MX16 organization, operating at up to 800 MHz. It features a 96-terminal grid array package suitable for synchronous applications. With a low standby current of 0.04 Amp and common I/O type, it's ideal for high-speed memory requirements in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MT41K256M16TW-107AIT:P
Micron Technology's MT41K256M16TW-107AIT:P is a DDR3L DRAM with 256MX16 organization, operating at 934.57 MHz. It features a low supply voltage of 1.35V and is suitable for industrial applications requiring high memory density and fast data access speeds. The package style is grid array, thin profile, fine pitch with common I/O type and self-refresh capability.
MT41K256M16TW-107IT:P
Micron Technology's MT41K256M16TW-107IT:P is a DDR3L DRAM with 256MX16 organization, operating at 1.35V. It features synchronous mode, self-refresh capability, and multi-bank page burst access. Ideal for applications requiring high memory density and fast data processing speeds.
MT41K256M16TW-107XIT:P
Micron Technology's MT41K256M16TW-107XIT:P is a DDR3L DRAM with 256MX16 organization, operating at 1.35V. It features synchronous mode, self-refresh capability, and multi-bank page burst access. Ideal for applications requiring high memory density and fast data processing in a grid array package style.
MT41K256M16TW-107:P/TR
Micron Technology's MT41K256M16TW-107:P/TR is a DDR3L DRAM with 256MX16 organization, operating at 934.5 MHz clock frequency. It features synchronous operation, self-refresh capability, and common I/O type. Ideal for applications requiring high-speed memory access in thin-profile devices.
MT41K256M16TW-107:P
Micron Technology's MT41K256M16TW-107:P is a DDR3L DRAM with 256MX16 organization, operating at 1.35V. It features synchronous operation, self-refresh capability, and a memory width of 16 bits. Ideal for applications requiring high-speed data processing in devices like computers and servers.
MT41K256M16TW-107IT:PTR
MT41K256M16TW-107IT:PTR by Micron Technology is a 256MX16 DDR3L DRAM with a memory density of 4Gb. It operates at a nominal voltage of 1.35V and has an access time of 20ns. This memory module is suitable for applications requiring high-speed synchronous operation and low power consumption.
MT41K256M16TW-107AAT:P
Micron Technology's MT41K256M16TW-107AAT:P is a DDR3L DRAM with 256MX16 organization, operating at 934.57 MHz. It features a thin profile grid array package suitable for industrial applications requiring high memory density and common I/O type. With self-refresh capability and AEC-Q100 screening level, it offers reliable performance in harsh environments.
MT41K128M16JT-125IT:KTR
Micron Technology's MT41K128M16JT-125IT:KTR is a DDR3L DRAM with 128MX16 organization, operating at 1.35V. It features synchronous mode, self-refresh capability, and industrial temperature grade. Suitable for applications requiring high memory density and multi-bank page burst access mode.
MT41K128M16JT-125IT:K
MT41K128M16JT-125IT:K by Micron Technology is a DDR3L DRAM with 128MX16 organization, operating at 800 MHz. It features a max supply voltage of 1.45V and offers a memory density of 2147483648 bits. Ideal for industrial applications requiring high-speed synchronous memory with common I/O type and self-refresh capabilities.
MT41K256M16TW-107AAT:PTR
MT41K256M16TW-107AAT:PTR by Micron Technology is a DDR3L DRAM with 256MX16 organization, operating at a max clock frequency of 934.57 MHz. It is commonly used in automotive applications due to its AEC-Q100 screening level and wide temperature range (-40°C to 105°C).
MT41K128M16JT-125AIT:KTR
Micron Technology's MT41K128M16JT-125AIT:KTR is a DDR3L DRAM with 128MX16 organization, operating at 800 MHz. It features a thin profile grid array package and operates at temperatures ranging from -40 to 85 °C. Ideal for applications requiring high-speed synchronous memory with common I/O type.
MT41K128M16JT-125XIT:K
Micron Technology's MT41K128M16JT-125XIT:K is a DDR3L DRAM with 128MX16 organization, operating at 1.35V. It features synchronous mode, self-refresh capability, and industrial temperature grade. Ideal for applications requiring high memory density and multi-bank page burst access mode in thin profile packages.
MT41K128M16JT-125:K
MT41K128M16JT-125:K by Micron Technology is a DDR3L DRAM with 128MX16 organization, operating at 800 MHz. It features a thin profile grid array package and consumes 195 mA max supply current. Ideal for applications requiring high-speed synchronous memory with common I/O type and self-refresh capability.
MT41K128M16JT-125AIT:K
Micron Technology's MT41K128M16JT-125AIT:K is a DDR3L DRAM with 128MX16 organization, operating at 800 MHz. It features a thin profile grid array package and operates in industrial temperature range. Ideal for applications requiring high-speed synchronous memory with common I/O type and self-refresh capability.
MT41K128M16JT-125XIT:KTR
Micron Technology's MT41K128M16JT-125XIT:KTR is a DDR3L DRAM with 128MX16 organization, operating at up to 800 MHz. It features synchronous operation, self-refresh capability, and common I/O type. Suitable for applications requiring high-speed memory access in devices such as servers, PCs, and networking equipment.
MT41K128M16JT-125:KTR
Micron Technology's MT41K128M16JT-125:KTR is a DDR3L DRAM with 128MX16 organization, operating at 1.35V. It features synchronous mode, self-refresh capability, and multi-bank page burst access. This thin-profile package with grid array style is suitable for applications requiring high memory density and fast data processing.
MT41K256M16TW-107AUT:P
DDR3L DRAM; Temperature Grade: AUTOMOTIVE; No. of Terminals: 96; Package Code: TFBGA; Refresh Cycles: 8192; Package Shape: RECTANGULAR;
MT41K256M16HA-125IT:E
Micron Technology's MT41K256M16HA-125IT:E is a DDR3L DRAM with 256MX16 organization, operating at 800 MHz. It features a low supply voltage of 1.35V and offers 4294967296 bits memory density. Ideal for applications requiring high-speed synchronous memory with common I/O type and self-refresh capability.
MT41K256M16HA-125IT:ETR
Micron Technology's MT41K256M16HA-125IT:ETR is a DDR3L DRAM with 256MX16 organization, operating at 1.35V. It features synchronous mode, self-refresh capability, and multi-bank page burst access. Suitable for applications requiring high memory density and fast data processing in compact devices.
MT41K128M16JT-107:K
Micron Technology's MT41K128M16JT-107:K is a DDR3L DRAM with 128MX16 organization, operating at 933 MHz. It features synchronous operation, self-refresh capability, and common I/O type. Suitable for applications requiring high-speed memory access in devices like smartphones, tablets, and networking equipment.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved