Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TLE9255WSKXUMA2 by Infineon Technologies is a small outline network interface IC with 14 terminals, GULL WING form, and 1.27mm pitch. It operates at 5V nominal voltage and AEC-Q100 screening level suitable for automotive applications. The package dimensions are 4mm x 8.75mm x 1.75mm, making it ideal for compact designs in the automotive industry.
Median Price
$2.190
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Chip1Stop
1+ parts
100+ parts
$1.240
1k+ parts
$1.190
10k+ parts
-
Mouser Electronics
$2.410
$1.460
$1.310
$1.200
Newark
$2.480
$1.500
$1.330
DigiKey
$2.830
$1.713
$1.512
Rochester
$1.490
$1.100
Verical
$1.501
$1.336
$1.261
RS (Exports)
$2.910
$2.623
Arrow
$1.329
Element14
$2.060
$1.810
$1.740
Digiode
$1.244
Nova Conductors
$1.670
Semtec, LLC
NAC Semi
$1.770
Vyrian
Ampacity Inc.
$1.110
Semicontronic
$1.082
$1.077
Corphita
$1.179
Argo Parts USA
Continental Prestige Electronics
$1.637
Component Stockers USA
$2.880
$1.800
$1.420
Corohmni
$6.563
Aztec Data Supply Inc.
$8.150
Modulus Dynamics
$10.641
$10.215
$9.790
Advanced Electronics
$10.943
$10.396
RC Electronics
$1.700
$1.560
$1.510
Perfect Parts
iodParts Technologies Inc.
$2.339
$2.005
Bastille Electronics
The use of plastic/epoxy material makes the product lightweight and durable, ideal for portable devices.
Being surface mountable, this product is easy to install and saves space on the PCB.
AEC-Q100 screening ensures high reliability and quality standards, making this product suitable for automotive applications.
Having 14 terminals allows for multiple connections and versatility in usage.
Operating at a nominal supply voltage of 5V makes it compatible with standard power sources.
Network Interfaces TLE9255WSKXUMA2 attributes and parameters. Explore more Network Interfaces devices from Infineon Technologies
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Screening Level:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
TLE9255WSKXUMA2 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - Mult Dev Cover Tape Chg 13/Jul/2022 Mult Dev Label Chgs 11/Jan/2018
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Surge Components
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
TLK110PT
TLK110PT by Texas Instruments is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a 48-terminal quad package style, suitable for network interfaces in industrial applications. The IC has a nominal voltage of 3.3V and terminal pitch of 0.5mm, making it ideal for surface mount assembly.
KSZ8041TL
Microchip Technology
Microchip Technology's KSZ8041TL is a Network Interface with 100 Mbps data rate, 3.3V supply voltage, and 58.3mA supply current. It is an Ethernet transceiver suitable for commercial temperature grade applications in various electronic devices requiring network connectivity.
DP83867ERGZR
DP83867ERGZR by Texas Instruments is an Ethernet transceiver IC with 1V supply voltage, supporting data rate of 1000000 Mbps. It operates in industrial temperature range (-40 to 105 °C) and comes in a square chip carrier package with 48 terminals for surface mount applications.
TJA1051T/E,118
NXP Semiconductors' TJA1051T/E,118 is a CAN transceiver with 1 Mbps data rate and 5V nominal voltage. It operates in automotive-grade temperatures (-40 to 125°C) and has AEC-Q100 screening level. This small outline package with gull wing terminals is ideal for automotive network interfaces.
MCP251863T-H/SS
CAN FD TRANSCEIVER;
TCAN332GDR
TCAN332GDR by Texas Instruments is an 8-terminal interface circuit with a data rate of 5 Mbps. Operating temperature ranges from -40 to 125°C, suitable for automotive applications. It features a small outline package style and nickel palladium gold terminal finish, making it ideal for network interfaces in compact designs.
KSZ8462HLI
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE;
TJA1028TK/3V3/20/X
NXP Semiconductors' TJA1028TK/3V3/20/X is a LIN transceiver with 8 terminals, operating at -40 to 150°C. It has a supply voltage of 3.3V and max current of 4.5mA, suitable for automotive applications meeting AEC-Q100 standards. This small outline package with heat sink is surface mountable and ideal for telecom networks.
KSZ9031RNXCA
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
TJA1044GT/1Z
INTERFACE CIRCUIT; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
ADM3053BRWZ-REEL7
Analog Devices
ADM3053BRWZ-REEL7 by Analog Devices is a Network Interface with 20 terminals, operating at -40 to 85°C. It has a supply voltage of 5V and data rate of 1 Mbps, suitable for industrial telecom applications. The package is small outline, rectangular in shape, with matte tin finish and Gull Wing terminal form.
LAN8720AI-CP-TR-ABC
LAN8720AI-CP-TR-ABC by Microchip is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a low supply current of 54 mA at 3.3V, suitable for industrial applications requiring reliable network interfaces in compact square chip carrier packages.
SN65HVD232QD
SN65HVD232QD by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate. It operates at 3.3V, suitable for automotive applications. This small outline package has 8 terminals and can withstand temperatures from -40 to 125°C.
KSZ9031RNXVA-TR
Microchip Technology's KSZ9031RNXVA-TR is an Ethernet transceiver with 48 terminals in a square chip carrier package. Operating temperature ranges from -40 to 105°C, suitable for industrial applications. It has a nominal voltage of 1.2V and meets AEC-Q100 and TS 16949 standards.
KSZ9031MNXCC
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HVQCCN; Package Shape: SQUARE;
DP83849CVS/NOPB
DP83849CVS/NOPB by Texas Instruments is a Network Interface with 3.3V power supply, 2 transceivers, and 100000 Mbps data rate. It is an Ethernet transceiver suitable for commercial temperature grade applications. The package style is flatpack with thin profile and fine pitch, making it ideal for surface mount designs.
DP83620SQX/NOPB
Texas Instruments DP83620SQX/NOPB is a 48-terminal Ethernet transceiver with data rate of 100000 Mbps. Operating temperature range from -40 to 85 °C, suitable for industrial applications. Package style includes chip carrier and very thin profile, making it ideal for surface mount designs.
PTCAN1057AVDRQ1
Texas Instruments PTCAN1057AVDRQ1 is an AEC-Q100 compliant CAN FD transceiver with 8 Mbps data rate. Operating temperature range from -40 to 150°C makes it ideal for automotive applications. With a small outline package and gull wing terminals, it offers high reliability in harsh environments.
TJA1042T/3/CM,118
NXP Semiconductors' TJA1042T/3/CM,118 is a network interface with 8 terminals and 5V supply voltage. It operates at 1Mbps data rate, suitable for interface circuits in automotive applications. The small outline package with matte tin finish and gull wing terminals makes it ideal for surface mount designs.
SN65HVD1040DR
SN65HVD1040DR by Texas Instruments is a network interface IC with 1Mbps data rate, operating at -40 to 125°C. It has 8 terminals, Gull Wing form, and requires 5V supply voltage. Ideal for automotive applications due to its small outline package and low supply current of 0.07mA.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLE9251VSJXUMA1
Infineon Technologies
TLE9251VSJXUMA1 by Infineon Technologies is a network interface IC with 8 terminals and a small outline package style. It operates at a nominal voltage of 5V and has a max seated height of 1.73mm. This IC is commonly used in telecom applications for interface circuit purposes.
TLE9252VLCXUMA1
INTERFACE CIRCUIT; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 2A; JESD-609 Code: e3;
TLE9252VSKXUMA1
TLE9252VSKXUMA1 by Infineon is a CAN FD transceiver with 5 Mbps data rate, AEC-Q100 screening, and 5V supply voltage. Ideal for automotive applications due to its small outline package and operating temperature range of -40 to 150°C.
TLE9251VLEXUMA1
TLE9251VLEXUMA1 by Infineon is an AEC-Q100 compliant interface circuit with 8 terminals, 5V supply voltage, and 0.65mm terminal pitch. It is designed for automotive applications requiring a small outline package with heat sink, suitable for surface mount assembly. The IC's compact size of 3x3mm and low seated height of 1.1mm make it ideal for space-constrained environments in vehicles.
TLE9255WLCXUMA1
TLE9255WLCXUMA1 by Infineon Technologies is a network interface IC with 14 terminals, AEC-Q100 screening level, and 5V nominal voltage. It is designed for automotive applications requiring a small outline package with surface mount capability and dual terminal position.
TLE9250XLEXUMA1
TLE9250XLEXUMA1 by Infineon is an AEC-Q100 compliant interface circuit with 8 terminals, 0.65mm pitch, and 5V supply voltage. Its small outline package makes it suitable for automotive applications requiring a compact design and high reliability in harsh environments. The no-lead terminal form and thin profile enhance space efficiency while ensuring robust performance.
TLE9250XSJXUMA1
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Finish: NICKEL GOLD PALLADIUM;
TLE9250VSJXUMA1
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TLE9250SJXUMA1
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
TLE9250LEXUMA1
TLE9250LEXUMA1 by Infineon is an AEC-Q100 compliant interface circuit with 8 terminals, 5V supply voltage, and 0.65mm terminal pitch. It is a small outline package suitable for automotive applications requiring network interfaces. The IC features a square shape, tin finish, and thin profile design for space-constrained installations.
TLE9251VSJXUMA1/SAMPLE
INTERFACE CIRCUIT;
TLE9250VLEXUMA1
TLE9250VLEXUMA1 by Infineon is an AEC-Q100 compliant interface circuit with 8 terminals, small outline package style, and tin terminal finish. It operates at a nominal voltage of 5V and has a terminal pitch of 0.65mm. Ideal for automotive applications requiring network interfaces in compact spaces.
TLE92613BQXXUMA1
CAN FD TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Terminal Position: QUAD;
TLE9261BQXV33XUMA1
CAN FD TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Minimum Operating Temperature: -40 Cel;
TLE9261BQXXUMA1
CAN FD TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Maximum Supply Current: 6.5 mA;
TLE94613ESV33XUMA1
CAN FD TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HTSSOP; Package Shape: RECTANGULAR; Package Equivalence Code: TSSOP24,.25;
TLE9351VSJXTMA1
CAN FD TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G8;
TLE92613BQXV33XUMA1
CAN FD TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Terminal Pitch: .5 mm;
TLE9271QXV33XUMA1
CAN FD TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Package Equivalence Code: LCC48,.27SQ,20;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved