Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TLE9250SJXUMA1 by Infineon is an AEC-Q100 compliant interface circuit with 8 terminals, 5V supply voltage, and 1.27mm terminal pitch. It is designed for automotive applications requiring small outline packages and dual terminal positions. The IC's gull wing form factor, nickel gold palladium finish, and moisture sensitivity level of 2A make it suitable for network interfaces in compact electronic systems.
Median Price
$1.610
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Rochester
1+ parts
$0.420
100+ parts
$0.410
1k+ parts
$0.400
10k+ parts
-
Mouser Electronics
$0.951
$0.832
$0.766
DigiKey
$1.660
$0.979
$0.879
$0.775
Digiode
$0.399
Nova Conductors
$0.752
Vyrian
Chip Stock
Ampacity Inc.
$0.357
Corphita
$0.378
Argo Parts USA
$0.738
Netroflash
$0.737
Semicontronic
$0.780
$0.760
$0.757
Continental Prestige Electronics
$0.882
$0.586
$0.382
Component Stockers USA
$1.500
$1.100
$0.740
$0.630
Microchip USA
$3.950
$3.920
$3.910
$3.900
Advanced Electronics
$11.460
$10.887
Aztec Data Supply Inc.
$15.770
Corohmni
$16.549
Modulus Dynamics
$16.827
$16.154
$15.481
Perfect Parts
Authorized Procurement Solutions
The use of plastic/epoxy material provides durability and lightweight construction, making this product suitable for various applications.
The surface mount capability allows for easy installation on circuit boards, saving space and simplifying assembly processes.
Compliance with AEC-Q100 standards ensures high reliability and performance in automotive applications, making it a reliable choice for automotive networking needs.
The rectangular shape of the package makes it easy to integrate this network interface into existing circuit layouts, providing flexibility and ease of design.
The use of nickel gold palladium terminal finish ensures excellent conductivity and corrosion resistance, enhancing the overall reliability and longevity of the product.
The nominal supply voltage of 5V provides compatibility with a wide range of electronic devices, making this product versatile and adaptable to various power requirements.
Network Interfaces TLE9250SJXUMA1 attributes and parameters. Explore more Network Interfaces devices from Infineon Technologies
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Screening Level:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
TLE9250SJXUMA1 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Mult Dev DS Chg 8/Nov/2019
PCN Packaging - Mult Dev Cover Tape Chg 13/Jul/2022 Mult Dev Label Chgs 11/Jan/2018
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
SPC TECHNOLOGY/ MULTICOMP
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
LAN8710A-EZC
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
MAX13054ASA
Maxim Integrated
MAX13054ASA by Maxim Integrated is a Network Interface with 8 terminals, operating at -40 to 125°C. It has a data rate of 1 Mbps and supports supply voltages of 3.3V and 5V. Ideal for automotive applications due to its BICMOS technology and small outline package style.
TCAN1042HD
TCAN1042HD by Texas Instruments is an Ethernet transceiver with a data rate of 2 Mbps. It operates in a temperature range from -55 to 125°C, making it suitable for military applications. This small outline package has 8 terminals and supports a supply voltage of 5V.
KSZ8041TLI
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TFQFP; Package Shape: SQUARE;
TJA1048TK,118
TJA1048TK,118 by NXP Semiconductors is a network interface IC with 2 transceivers. It operates at a data rate of 1 Mbps and has a nominal voltage of 5V. This IC is commonly used in telecom applications as an interface circuit.
88E1111-B2-BAB2I000
Marvell Technology
Marvell Technology's 88E1111-B2-BAB2I000 is a CMOS Ethernet transceiver with 117 terminals in a low-profile grid array package. It operates at a nominal voltage of 1V and has a compact size of 10mm width and 14mm length. Ideal for network interfaces, this surface-mount device is designed for telecom applications.
NCV7351D13R2G
Onsemi
NCV7351D13R2G by Onsemi is an automotive-grade interface circuit with a 5V supply voltage and 1Mbps data rate. It features a small outline package style, matte tin terminal finish, and dual terminal position. Ideal for network interfaces in automotive applications due to AEC-Q100 screening level.
TJA1027TK/20,118
LIN TRANSCEIVER; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
NCN5121MNTWG
The Onsemi NCN5121MNTWG is a Network Interface IC with 40 terminals in a square chip carrier package. It operates b/w -40 to 105°C, suitable for industrial applications. With a nominal voltage of 3.3V and terminal pitch of 0.5mm, it is ideal for telecom interface circuits.
NTS0104BQ,115
NTS0104BQ,115 by NXP Semiconductors is a Network Interface with 4 functions. It operates in automotive grade at temperatures from -40 to 125°C. This interface circuit has a nominal voltage of 3.3V and comes in a chip carrier package style for various applications.
MAX3051ESA+
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
88E1111-B2-BAB1I000
Marvell's 88E1111-B2-BAB1I000 is a CMOS Ethernet transceiver with 117 terminals in a low-profile grid array package. It operates at 1V, measures 10mm wide by 14mm long, and has a terminal pitch of 1mm. Ideal for network interfaces requiring compact design and surface mount capability.
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
KSZ8081RNBCA-TR
Microchip's KSZ8081RNBCA-TR is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at temperatures from 0 to 70°C. It features a square chip carrier package style with matte tin finish, suitable for network interfaces in commercial-grade telecom applications.
TJA1029TK/20/1J
NXP Semiconductors' TJA1029TK/20/1J is a Network Interface IC with AEC-Q100 screening. It features 8 terminals, GULL WING form, and 5V supply voltage. The small outline package has a 3x3mm footprint, 0.65mm terminal pitch, and can withstand peak reflow at 260°C. Ideal for automotive communication systems.
MCP2542FDT-E/MF
MCP2542FDT-E/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, operating at -40 to 125°C. It has 8 terminals in a small outline package suitable for automotive applications. The device supports a nominal voltage of 5V and consumes up to 140mA during operation.
SN65HVD251DRG4
SN65HVD251DRG4 by Texas Instruments is a BICMOS interface circuit with 1Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 125°C and requires a 5V power supply. This small outline package has dual terminals and is designed for surface mount assembly.
TJA1042TK/3/1J
NXP Semiconductors' TJA1042TK/3/1J is a CAN transceiver with 5 Mbps data rate, AEC-Q100 screening level, and 8 terminals. It operates b/w -40 to 150°C, has a supply voltage of 5V, and consumes only 0.07 mA. Ideal for automotive applications due to its small outline package style and dual terminal position.
KSZ9021GNI
Microchip Technology's KSZ9021GNI is a 64-terminal Ethernet transceiver with a data rate of 1000 Mbps. Operating in industrial temperature range (-40 to 85°C), it features a square chip carrier package style and terminal pitch of 0.4 mm. Ideal for network interfaces, this surface-mount component is compact (8x8 mm) and has a low seated height (0.9 mm).
KSZ8041NLI-TR
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLE9251VSJXUMA1
Infineon Technologies
TLE9251VSJXUMA1 by Infineon Technologies is a network interface IC with 8 terminals and a small outline package style. It operates at a nominal voltage of 5V and has a max seated height of 1.73mm. This IC is commonly used in telecom applications for interface circuit purposes.
TLE9252VLCXUMA1
INTERFACE CIRCUIT; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 2A; JESD-609 Code: e3;
TLE9252VSKXUMA1
TLE9252VSKXUMA1 by Infineon is a CAN FD transceiver with 5 Mbps data rate, AEC-Q100 screening, and 5V supply voltage. Ideal for automotive applications due to its small outline package and operating temperature range of -40 to 150°C.
TLE9255WSKXUMA2
TLE9255WSKXUMA2 by Infineon Technologies is a small outline network interface IC with 14 terminals, GULL WING form, and 1.27mm pitch. It operates at 5V nominal voltage and AEC-Q100 screening level suitable for automotive applications. The package dimensions are 4mm x 8.75mm x 1.75mm, making it ideal for compact designs in the automotive industry.
TLE9251VLEXUMA1
TLE9251VLEXUMA1 by Infineon is an AEC-Q100 compliant interface circuit with 8 terminals, 5V supply voltage, and 0.65mm terminal pitch. It is designed for automotive applications requiring a small outline package with heat sink, suitable for surface mount assembly. The IC's compact size of 3x3mm and low seated height of 1.1mm make it ideal for space-constrained environments in vehicles.
TLE9255WLCXUMA1
TLE9255WLCXUMA1 by Infineon Technologies is a network interface IC with 14 terminals, AEC-Q100 screening level, and 5V nominal voltage. It is designed for automotive applications requiring a small outline package with surface mount capability and dual terminal position.
TLE9250XLEXUMA1
TLE9250XLEXUMA1 by Infineon is an AEC-Q100 compliant interface circuit with 8 terminals, 0.65mm pitch, and 5V supply voltage. Its small outline package makes it suitable for automotive applications requiring a compact design and high reliability in harsh environments. The no-lead terminal form and thin profile enhance space efficiency while ensuring robust performance.
TLE9250XSJXUMA1
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Finish: NICKEL GOLD PALLADIUM;
TLE9250VSJXUMA1
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TLE9250LEXUMA1
TLE9250LEXUMA1 by Infineon is an AEC-Q100 compliant interface circuit with 8 terminals, 5V supply voltage, and 0.65mm terminal pitch. It is a small outline package suitable for automotive applications requiring network interfaces. The IC features a square shape, tin finish, and thin profile design for space-constrained installations.
TLE9251VSJXUMA1/SAMPLE
INTERFACE CIRCUIT;
TLE9250VLEXUMA1
TLE9250VLEXUMA1 by Infineon is an AEC-Q100 compliant interface circuit with 8 terminals, small outline package style, and tin terminal finish. It operates at a nominal voltage of 5V and has a terminal pitch of 0.65mm. Ideal for automotive applications requiring network interfaces in compact spaces.
TLE92613BQXXUMA1
CAN FD TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Terminal Position: QUAD;
TLE9261BQXV33XUMA1
CAN FD TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Minimum Operating Temperature: -40 Cel;
TLE9261BQXXUMA1
CAN FD TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Maximum Supply Current: 6.5 mA;
TLE94613ESV33XUMA1
CAN FD TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HTSSOP; Package Shape: RECTANGULAR; Package Equivalence Code: TSSOP24,.25;
TLE9351VSJXTMA1
CAN FD TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G8;
TLE92613BQXV33XUMA1
CAN FD TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Terminal Pitch: .5 mm;
TLE9271QXV33XUMA1
CAN FD TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Package Equivalence Code: LCC48,.27SQ,20;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved