Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Infineon's SPD04N60C3 is a N-CHANNEL FET with 600V DS breakdown voltage, ideal for SWITCHING applications. Features include 13.5A pulsed drain current, 130mJ avalanche energy rating, and 0.95ohm max on resistance. Its small outline package and 150°C operating temp make it suitable for various power management needs.
Median Price
$0.586
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
EXC GmbH
1+ parts
$0.436
100+ parts
-
1k+ parts
10k+ parts
Maritex
$0.779
Vyrian
Rutronik
Digiode
ComSIT Distribution GmbH
Goldney Electronics S.L.
Bristol Electronics
Nova Conductors
Aztec Data Supply Inc.
$1.350
Modulus Dynamics
$1.895
$1.819
$1.743
AZTECH Wire
$5.390
$5.180
$5.070
$4.970
Andel Nordic
$40.390
$28.271
Ampacity Inc.
$48.050
Kepictronics
Perfect Parts
Lixinc
Continental Prestige Electronics
A-Z Elektronik GmbH
Microchip USA
Bastille Electronics
Futuretech Components
Corphita
Argo Parts USA
The plastic/epoxy package body material provides durability and protection for the FET, ensuring reliable performance in various operating conditions.
N-channel FETs typically have lower ON-resistance and higher electron mobility, making them more efficient for many applications.
The built-in diode simplifies circuit design and protects against reverse polarity, enhancing the functionality and reliability of the FET.
Designed for switching applications, this FET offers fast switching speeds and high efficiency, making it suitable for power management and control.
Surface mount compatibility makes it easy to integrate this FET into compact circuit designs, saving space and simplifying assembly.
With a high maximum operating temperature of 150°C, this FET can withstand harsh environments and high-temperature conditions without compromising performance.
Power Field Effect Transistors (FET) SPD04N60C3 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Infineon Technologies
Additional Features:
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
SPD04N60C3 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
Onsemi
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
New England Semiconductor
FDS4559
FDS4559 by Onsemi is a Power FET with N-Channel and P-Channel types, ideal for switching applications. It features a 60V min DS breakdown voltage, 20A max pulsed drain current, and 0.055 ohm max drain-source resistance. With a small outline package style and matte tin terminal finish, it operates in enhancement mode up to 175°C.
BS170
Topaz Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e0; Maximum Operating Temperature: 150 Cel;
FDMS86300DC
FDMS86300DC by Onsemi is a N-CHANNEL Power FET with 80V DS Breakdown Voltage, ideal for SWITCHING applications. It features 260A IDM Pulsed Drain Current, 0.0031 ohm RDS(ON), and 240mJ EAS Avalanche Energy Rating. With a max power dissipation of 125W and operating temperature up to 150°C, it is suitable for high-power switching circuits in various electronic devices.
SI2319CDS-T1-BE3
Vishay Intertechnology
SI2319CDS-T1-BE3 by Vishay Intertechnology is a P-CHANNEL FET for SWITCHING applications. It features 40V DS Breakdown Voltage, 20A IDM, and 0.077 ohm Drain-Source On Resistance. With ENHANCEMENT MODE operation, this MOSFET has a max power dissipation of 2.5W in a SMALL OUTLINE package suitable for surface mount assemblies.
SUD50P06-15L-E3
Vishay Intertechnology's SUD50P06-15L-E3 is a P-channel power FET with 60V DS breakdown voltage and 50A max drain current. Ideal for switching applications, it features a built-in diode, 0.015 ohm max on-resistance, and operates in enhancement mode. Suitable for surface mount with Gull Wing terminals, it has a max power dissipation of 136W and can withstand up to 175°C operating temperature.
2N7002BKMB,315
NXP Semiconductors
2N7002BKMB,315 by NXP Semiconductors is a single N-channel power FET with an operating mode of enhancement. It has a max drain current of 0.45A and a max power dissipation of 0.715W. This MOSFET is suitable for applications requiring high efficiency and temperature resistance up to 150°C.
AUIRF4905STRL
Infineon Technologies
AUIRF4905STRL by Infineon is a P-CHANNEL FET for SWITCHING applications. It features 55V DS Breakdown Voltage, 280A IDM, and 0.02 ohm RDS(on). With a max power dissipation of 170W and operating temperature up to 150°C, it's ideal for high-power switching circuits in automotive and industrial electronics.
IRF540PBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; Avalanche Energy Rating (EAS): 230 mJ; JESD-609 Code: e3;
SIA456DJ-T1-GE3
Vishay Intertechnology's SIA456DJ-T1-GE3 is a N-channel Power FET with 200V DS breakdown voltage and 2.6A max drain current. Ideal for switching applications, it operates in enhancement mode with 55ns turn on time and 75ns turn off time. Suitable for surface mount, this transistor has a max power dissipation of 19W in a small outline package.
MSCSM170AM11CT3AG
Microchip Technology
MSCSM170AM11CT3AG by Microchip Technology is a N-CHANNEL FET with 1700V DS Breakdown Voltage, 480A IDM, and 0.0113 ohm RDS(on). It is used for SWITCHING applications in SERIES CONNECTED configuration. Operating from -40 to 175 °C, it features METAL-OXIDE SEMICONDUCTOR technology and SILICON CARBIDE material.
PSMN4R8-100BSE
PSMN4R8-100BSE by NXP is an N-channel Power FET with 100V DS breakdown voltage and 120A max drain current. Ideal for switching applications, it features a built-in diode, 0.0048 ohm RDS(on), and 707A pulsed drain current.
SIR422DP-T1-GE3
Vishay Intertechnology's SIR422DP-T1-GE3 is an N-channel power FET with a built-in diode, ideal for switching applications. It features a min DS breakdown voltage of 40V, max pulsed drain current of 70A, and max operating temperature of 150°C. This MOSFET has a package style of small outline and offers low drain-source on resistance at 0.0066 ohm.
IRLR2908TRPBF
Infineon's IRLR2908TRPBF is a N-CHANNEL FET with 80V DS Breakdown Voltage and 150A IDM. Ideal for SWITCHING applications, it features 0.028 ohm RDS(ON) and 120W Pdiss. With ENHANCEMENT MODE operation and METAL-OXIDE SEMICONDUCTOR tech, it operates up to 175°C making it suitable for high-power electronics.
IRFP460
Intersil
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Transistor Element Material: SILICON; Avalanche Energy Rating (EAS): 960 mJ;
IPD50P04P4L11ATMA2
Infineon's IPD50P04P4L11ATMA2 is a P-CHANNEL FET with 40V DS Breakdown Voltage, 200A IDM, and 0.0106 ohm RDS(on). Ideal for power applications in automotive electronics due to AEC-Q101 standard compliance and 58W power dissipation.
STD12NF06LT4
STD12NF06LT4 by STMicroelectronics is an N-channel power FET with a 60V DS breakdown voltage and 48A max pulsed drain current. It is used for switching applications, operates in enhancement mode, and has a built-in diode. The transistor features a 0.12 ohm max drain-source resistance and can handle up to 30W of power dissipation.
SUD50P04-09L-E3
Vishay Intertechnology's SUD50P04-09L-E3 is a P-channel Power FET with 40V DS breakdown voltage and 100A IDM. Ideal for applications requiring high power dissipation, such as automotive systems or industrial equipment due to its 136W max power dissipation and -55 to 175°C operating temperature range.
IPB020N10N5ATMA1
Infineon's IPB020N10N5ATMA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.002 ohm RDS(on), and 120A ID. Ideal for switching applications due to its 480A IDM and built-in diode. Features GULL WING terminals in a SMALL OUTLINE package style.
FQD7P20TM
FQD7P20TM by Onsemi is a P-CHANNEL Power FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 22.8A and EAS of 570mJ, operating in ENHANCEMENT MODE at up to 150°C.
JANTX2N6796
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 25 W; Operating Mode: ENHANCEMENT MODE; JESD-609 Code: e0;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FCD900N60Z
FCD900N60Z by Onsemi is a N-CHANNEL Power FET with 600V DS Breakdown Voltage. It features a built-in diode, 13.5A IDM, and 0.9 ohm RDS(on). Ideal for switching applications, this MOSFET operates in enhancement mode with 52W power dissipation and -55 to +150°C temperature range.
SPD06N80C3ATMA1
Infineon's SPD06N80C3ATMA1 is a N-CHANNEL FET with 800V DS breakdown voltage, ideal for switching applications. Features include 18A IDM, 230mJ EAS, and 0.9ohm RDS(on). Its small outline package and built-in diode make it suitable for enhancement mode operation in various power electronics designs.
SPD02N80C3ATMA1
Infineon's SPD02N80C3ATMA1 is a N-CHANNEL FET with 800V DS breakdown voltage, ideal for switching applications. Featuring a single configuration with built-in diode, it has 2A max drain current and 2.7ohm max on resistance. This MOSFET operates in enhancement mode and is surface mountable, making it suitable for various power control needs.
SPD04N80C3ATMA1
Infineon's SPD04N80C3ATMA1 is a N-CHANNEL FET with 800V DS breakdown voltage, ideal for switching applications. Features include 12A IDM, 170mJ EAS, and 1.3Ω RDS(on). Its small outline package and gull wing terminals make it suitable for surface mount designs.
SPD06N80C3
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 83 W; Maximum Drain Current (ID): 6 A; Qualification: Not Qualified;
SPD02N80C3BTMA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-609 Code: e3; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
SPD02N80C3BT
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; No. of Elements: 1; Maximum Operating Temperature: 150 Cel;
SPD02N80C3
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Maximum Drain-Source On Resistance: 2.7 ohm; Operating Mode: ENHANCEMENT MODE;
SPD06N80C3BTMA1
Infineon Technologies' SPD06N80C3BTMA1 is a power FET with N-channel configuration and built-in diode. It has a min DS breakdown voltage of 800V, making it suitable for switching applications. With a max pulsed drain current of 18A and low on-resistance of 0.9 ohm, it offers efficient performance in various electronic devices.
SPD04N60C3ATMA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Additional Features: AVALANCHE RATED; Terminal Form: GULL WING;
SPD07N60C3ATMA1
Infineon's SPD07N60C3ATMA1 is a N-CHANNEL FET with 600V DS breakdown voltage, ideal for switching applications. Features include 21.9A IDM, 0.6 ohm RDS(on), and 230mJ EAS rating. Its GULL WING terminals and ENHANCEMENT MODE operation make it suitable for surface mount designs.
SPD06N60C3ATMA1
SPD06N60C3ATMA1 by Infineon Technologies is a power FET with a min DS breakdown voltage of 600V. It is an N-channel transistor used for switching applications, with a max pulsed drain current of 18.6A and a max drain-source on resistance of 0.75 ohm.
SPD04P10PLGBTMA1
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Shape: RECTANGULAR; Operating Mode: ENHANCEMENT MODE; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
SPD08P06PGBTMA1
Infineon's SPD08P06PGBTMA1 is a P-CHANNEL FET with 60V DS Breakdown Voltage, 35.2A IDM, and 0.3 ohm RDS(ON). Ideal for power management applications due to its small outline package and high operating temperature of 175°C.
SPD06N80C3XT
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Package Style (Meter): SMALL OUTLINE; Package Body Material: PLASTIC/EPOXY;
SPD04P10PGBTMA1
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Qualification: Not Qualified; Maximum Pulsed Drain Current (IDM): 16 A; JESD-609 Code: e3;
SPD06N60C3
Infineon's SPD06N60C3 is a N-CHANNEL FET with 600V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 18.6A IDM, 200mJ EAS, and 0.75 ohm RDS(on). With a max power dissipation of 74W and operating temp up to 150°C, it offers reliable performance in various electronic systems.
SPD03N60C3ATMA1
Infineon's SPD03N60C3ATMA1 is a N-CHANNEL FET with 600V DS breakdown voltage, ideal for switching applications. Features include 9.6A max pulsed drain current and 1.4 ohm max drain-source resistance. Its small outline package and built-in diode make it suitable for enhancement mode operation in various electronic devices.
SPD09P06PLGBTMA1
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): 9.7 A; JESD-609 Code: e3; Maximum Pulsed Drain Current (IDM): 38.8 A;
SPD02N50C3XT
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Drain-Source On Resistance: 3 ohm; No. of Elements: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved