Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 40000 MHz; Maximum Collector Current (IC): .05 A; Terminal Position: DUAL;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Native Components
$0.304
$0.292
Northwest PG Solutions
$0.334
$0.295
Modulus Dynamics
$1.681
$1.614
$1.547
Corphita
RF Small Signal Bipolar Junction Transistors (BJT) BFP640_E_L6327 attributes and parameters. Explore more RF Small Signal Bipolar Junction Transistors (BJT) devices from Infineon Technologies
Additional Features:
Case Connection:
Maximum Collector Current (IC):
Maximum Collector-Base Capacitance:
Maximum Collector-Emitter Voltage:
Configuration:
Highest Frequency Band:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
BFP640_E_L6327 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
Diodes Incorporated
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
Rectron
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Vishay Intertechnology
Hitachi
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
BFU550XRR
BFU550XRR by NXP Semiconductors is a RF BJT transistor with NPN polarity, suitable for amplifier applications in L Band frequencies. It features a max operating temperature of 150°C, collector-emitter voltage of 12V, and transition frequency of 11GHz. This small outline package with Gull Wing terminals is ideal for surface mount designs requiring high-frequency performance.
BFQ254/I
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 1300 MHz; Maximum Collector Current (IC): .3 A; JESD-30 Code: O-CRDB-F4;
BFR193E6327HTSA1
BFR193E6327HTSA1 by Infineon Technologies is an NPN RF BJT transistor with a max operating temperature of 150°C. It has a min DC current gain of 70 and operates in the ultra-high frequency band up to 8000 MHz. This transistor is commonly used as an amplifier in applications requiring high-frequency signal amplification.
MPSH10
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 650 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .04 A;
MCH4017
The Onsemi MCH4017 is an NPN RF BJT with a max. power dissipation of 0.45W, suitable for UHF applications. With a min. DC current gain of 60 and max. collector-emitter voltage of 12V, it operates at up to 150 °C, making it ideal for high-frequency circuits in small outline packages.
BFU725F/N1,115
BFU725F/N1,115 by NXP Semiconductors is an NPN RF Small Signal BJT with a max power dissipation of 0.136W and min DC current gain of 160. It features silicon germanium material and can handle a max collector current of 0.04A. Ideal for applications requiring high-frequency signal amplification in compact electronic devices.
MMBTH10LT3
MMBTH10LT3 by Onsemi is an NPN RF BJT with a max collector-emitter voltage of 25V and fT of 650MHz. Ideal for UHF applications, it comes in a small outline package with Gull Wing terminals, making it suitable for high-frequency circuit designs.
Semiconductor Technology
BFU590QX
BFU590QX by NXP Semiconductors is a RF Small Signal BJT with NPN polarity, suitable for amplifier applications. It has a max fT of 8000 MHz, Vce of 12V, and Ic of 0.2A. This transistor comes in a small outline package with flat terminals and is surface mountable.
MMBT918
MMBT918 by Onsemi is a NPN RF BJT transistor with a max fT of 600 MHz. It has a max IC of 0.05 A and hFE of 20, ideal for amplifier applications in the VHF band. This small outline package with gull wing terminals operates up to 150 °C, making it suitable for high-frequency amplification needs.
934056947115
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 7000 MHz; Maximum Collector Current (IC): .2 A; JESD-30 Code: R-PSSO-F3;
MPS918
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 600 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .05 A;
NSVF6001SB6T1G
NSVF6001SB6T1G by Onsemi is an NPN BJT transistor with 6 terminals, operating at -55 to 150 °C. It has a max collector-emitter voltage of 12V and fT of 6700 MHz, suitable for ultra-high frequency amplifier applications in AEC-Q101 standard environments.
NSVF4020SG4T1G
NSVF4020SG4T1G by Onsemi is an NPN BJT transistor for amplifier applications in KU band. With a max power dissipation of 0.4W, it offers a min hFE of 60 and fT of 16GHz. This small outline package has 4 terminals, operates b/w -55 to 150°C, and supports up to 8V collector-emitter voltage.
BFG425WT/R
NXP Semiconductors' BFG425WT/R is a NPN RF BJT transistor with 4 terminals, ideal for L Band applications. It has a max power dissipation of 0.135W, fT of 25GHz, and hFE of 50. Suitable for switching purposes with a max collector current of 0.03A and max collector-emitter voltage of 4.5V.
KSC1674R-C
Onsemi's KSC1674R-C is an NPN BJT for RF applications. It features a VCEsat of 0.3V, hFE of 40, and fT of 600MHz. Ideal for ultra-high frequency amplification in through-hole packages with 3 terminals.
BFY740B01ESB4SA1
RF Small Signal Bipolar Transistors; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
2N5109
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Maximum Collector Current (IC): .4 A; No. of Elements: 1; Maximum Collector-Emitter Voltage: 20 V; Transistor Element Material: SILICON;
2N2222
Thomson-csf Semiconductors
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Maximum Collector-Emitter Voltage: 30 V;
BFR93AW-E6327
Siemens
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 6000 MHz; Maximum Collector Current (IC): .05 A; No. of Terminals: 3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BFP650FH6327XTSA1
RF Small Signal Bipolar Transistors; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN;
BFP650H6327XTSA1
BFP650H6327XTSA1 by Infineon Technologies is a NPN RF Small Signal BJT with 4 terminals, suitable for X Band applications. It has a max fT of 42 GHz, max IC of 0.15 A, and max VCE of 4 V. Ideal for amplifier circuits in high-frequency communication systems due to its silicon germanium carbon element material.
BFP640ESDH6327XTSA1
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 45000 MHz; Maximum Collector Current (IC): .05 A; Transistor Element Material: SILICON GERMANIUM CARBON;
BFP640H6327XTSA1
BFP640H6327XTSA1 by Infineon Technologies is a NPN RF BJT transistor with 4 terminals, suitable for C band applications. It has a max fT of 40 GHz, IC of 0.05 A, and VCE of 4 V. Ideal for amplifier circuits in high-frequency communication systems due to its small outline package and silicon germanium material.
BFP620FH7764XTSA1
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 65000 MHz; Maximum Collector Current (IC): .08 A; No. of Terminals: 4;
BFP640FESDH6327XTSA1
BFP640FESDH6327XTSA1 by Infineon Technologies is a NPN RF BJT transistor with 4.1V VCE, 0.05A IC, and fT of 46GHz. It is used for X Band amplifier applications in automotive electronics, meeting AEC-Q101 standards. This surface-mount device has a small outline package with 4 terminals and silicon germanium carbon element material.
BFP640FH6327XTSA1
BFP640FH6327XTSA1 by Infineon Technologies is a NPN RF Small Signal BJT with 4 terminals, suitable for C Band applications. It has a max fT of 40 GHz, 0.05 A IC, and 4 V VCE. This transistor is designed for high-frequency amplifier circuits in automotive electronics.
BFP620H7764XTSA1
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 65000 MHz; Maximum Collector Current (IC): .08 A; Maximum Collector-Emitter Voltage: 2.3 V;
BFP620FE7764
BFP620FE7764 by Infineon Technologies is a NPN RF BJT transistor with 4 terminals, operating in the C band up to 65 GHz. It has a max collector-emitter voltage of 2.3V and collector current of 0.08A, making it suitable for high-frequency applications like wireless communication systems. The package is surface mountable with a small outline shape and matte tin finish.
BFP640F-E6327
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 30000 MHz; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .05 A;
BFP640FE6327HTSA1
RF Small Signal Bipolar Transistors;
BFP640FE6327XT
BFP640F
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 40000 MHz; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .05 A;
BFP620FE7764HTSA1
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 65000 MHz; Maximum Collector Current (IC): .08 A; Transistor Element Material: SILICON GERMANIUM;
BFP620E7764HTSA1
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 65000 MHz; Maximum Collector Current (IC): .08 A; Package Style (Meter): SMALL OUTLINE;
BFP640FESD
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 46000 MHz; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .05 A;
BFP620_E6327
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 65000 MHz; Maximum Power Dissipation (Abs): .185 W; Maximum Collector Current (IC): .08 A;
BFP620F
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 65000 MHz; Maximum Collector Current (IC): .08 A; Terminal Finish: TIN;
BFP640
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved