Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Small Signal Bipolar Junction Transistors (BJT) are electronic devices used in low-power applications to amplify and switch small signals. They are commonly used in applications such as audio amplifiers, signal processing, and low-power digital circuits.Small Signal BJTs are designed to handle low-power levels and operate at low to medium frequencies, typically in the range of a few Hz to several MHz. They have a high gain and low noise figure, making them suitable for small signal amplification.The Small Signal BJT consists of an emitter, base, and collector region, and works by controlling the flow of majority charge carriers (electrons or holes) between the emitter and collector through the base region. When a voltage is applied to the base-emitter junction, a small current flows through the base, allowing a larger current to flow from the emitter to the collector.Proper use of Small Signal BJTs is important to ensure optimal performance, reliability, and compatibility with other components in the circuit. Small Signal BJTs are often used in conjunction with other components, such as capacitors and resistors, to form complete low-power electronic circuits.B395
Add filters
All
Selected
BCP49H6359XTMA1
Infineon Technologies
NPN; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .5 A; Terminal Form: GULL WING;
COLLECTOR
.5 A
60 V
DARLINGTON
2000
R-PDSO-G4
1
4
PLASTIC/EPOXY
RECTANGULAR
SMALL OUTLINE
NOT SPECIFIED
NPN
YES
GULL WING
DUAL
AMPLIFIER
SILICON
200 MHz
BCR08PNH6727XTSA1
BCR08PNH6727XTSA1 by Infineon Technologies is a Small Signal BJT with NPN and PNP channels. It features 2 elements with built-in resistor for switching applications. This transistor has a max collector-emitter voltage of 50V, DC current gain of 70, and can handle a collector current of 0.07A.
BUILT-IN BIAS RESISTOR RATIO 1
.07 A
50 V
SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR
70
R-PDSO-G6
2
6
NPN AND PNP
SWITCHING
100 MHz
BCR10PNH6727XTSA1
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): .1 A; No. of Elements: 2;
BUILT-IN BIAS RESISTOR RATIO IS 1
.1 A
30
130 MHz
BCR10PNH6730XTMA1
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): .1 A; Maximum Collector-Emitter Voltage: 50 V;
BCR133B6327
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): .1 A; JESD-30 Code: R-PDSO-G3;
SINGLE WITH BUILT-IN RESISTOR
R-PDSO-G3
3
150 Cel
260
BCR133SE6327BTSA1
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): .1 A; No. of Terminals: 6;
ISOLATED
BCR142B6327HTLA1
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 150 MHz; Maximum Collector Current (IC): .1 A; No. of Elements: 1;
BUILT-IN BIAS RESISTOR RATIO IS 2.14
150 MHz
BCR48PNH6727
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .07 A; Package Style (Meter): SMALL OUTLINE;
BFN18H6327XTSA1
Infineon's BFN18H6327XTSA1 is a NPN BJT transistor for switching applications. With max. VCE of 300V, IC of 0.2A, and hFE of 30, it operates at up to 150°C. This surface-mount device in a small outline package is ideal for high-frequency switching circuits.
.2 A
300 V
SINGLE
R-PSSO-F3
e3
TIN
FLAT
70 MHz
BCW66KG-E6433
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 170 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
.8 A
45 V
40
.5 W
AEC-Q101
Other Transistors
170 MHz
BCR119SH6433XTMA1
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 150 MHz; Maximum Collector Current (IC): .1 A; Maximum Collector-Emitter Voltage: 50 V;
BUILT-IN BIAS RESISTOR
120
BFN26E6433HTMA1
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 70 MHz; Maximum Collector Current (IC): .2 A; Transistor Application: SWITCHING;
DTC114YU3T106
ROHM
ROHM DTC114YU3T106 is a NPN BJT with built-in resistor for switching applications. It has hFE of 68, VCE of 50V, and fT of 250MHz. The transistor comes in a small outline package with Gull Wing terminals made of silicon material.
BUILT IN BIAS RESISTANCE RATIO IS 4.7
68
250 MHz
BCX5316H6433XTMA1
BCX5316H6433XTMA1 by Infineon is a PNP BJT transistor with hFE of 100, VCE of 80V, and IC of 1A. Ideal for amplifier applications, it operates up to 150°C with a transition frequency of 125MHz. Suitable for surface mount designs in automotive electronics per AEC-Q101 standard.
1 A
80 V
100
PNP
125 MHz
BCW66KHB6327HTLA1
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 170 MHz; Maximum Collector Current (IC): .8 A; Peak Reflow Temperature (C): NOT SPECIFIED;
AC857CWQ-7
Diodes Incorporated
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .1 A; No. of Terminals: 3;
HIGH RELIABILITY
420
MATTE TIN
ADTA143XUAQ-13
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; Additional Features: HIGH RELIABILITY, BUILT IN BIAS RESISTANCE RATIO IS 2.13;
HIGH RELIABILITY, BUILT IN BIAS RESISTANCE RATIO IS 2.13
ADTA143ZUAQ-13
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 80;
HIGH RELIABILITY, BUILT IN BIAS RESISTANCE RATIO IS 10
80
Matte Tin (Sn)
ADTC114YUAQ-13
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; Additional Features: HIGH RELIABILITY, BUILT IN BIAS RESISTANCE RATIO IS 4.7;
HIGH RELIABILITY, BUILT IN BIAS RESISTANCE RATIO IS 4.7
ADTC143TUAQ-13
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; Additional Features: HIGH RELIABILITY, BUILT IN BIAS RESISTOR;
HIGH RELIABILITY, BUILT IN BIAS RESISTOR
ADTC143ZUAQ-13
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; No. of Elements: 1;
BC846BPN-AU_R1_000A1
Panjit International
BC846BPN-AU_R1_000A1 by Panjit Int. is a Small Signal BJT with NPN/PNP polarity, 2 elements, and Gull Wing terminals. Ideal for amplifier applications, it has hFE of 200, VCE of 65V, and fT of 100MHz. AEC-Q101 compliant with temp range -55 to 150°C, it's a versatile choice for compact designs needing high gain and frequency performance.
65 V
SEPARATE, 2 ELEMENTS
200
-55 Cel
EMH25FHAT2R
ROHM's EMH25FHAT2R is a NPN BJT with 2 elements, built-in resistor, and hFE of 80. Ideal for switching applications with max VCE of 50V and IC of 0.1A. Features include PLASTIC/EPOXY body, surface mount compatibility, and AEC-Q101 standard compliance.
BUILT IN BIAS RESISTANCE RATIO IS 10
R-PDSO-F6
BCR08PNE6327BTSA1
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 170 MHz; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .1 A;
BUILT-IN BIAS RESISTOR RATIO IS 21.36
2 pF
.25 W
.3 V
BCR08PNE6433HTMA1
BCR22PNE6433HTMA1
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 130 MHz; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .1 A;
BUILT IN BIAS RESISTANCE RATIO IS 1
3 pF
50
AC847BWQ-13
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .1 A; Moisture Sensitivity Level (MSL): 1;
300 MHz
ACX114EUQ-13R
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; Package Body Material: PLASTIC/EPOXY;
HIGH RELIABILITY, BUILT IN BIAS RESISTANCE RATIO IS 1
ACX143ZUQ-13R
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; JESD-609 Code: e3;
ADC143TUQ-13
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; Package Style (Meter): SMALL OUTLINE;
ADC143ZUQ-13
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; Package Shape: RECTANGULAR;
MMDT4401Q-7-F
NPN; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Additional Features: HIGH RELIABILITY;
.6 A
40 V
255 ns
35 ns
BC857BW-G
Comchip Technology
BC857BW-G by Comchip Technology is a PNP BJT with max power dissipation of 0.15W, hFE of 220, and fT of 100MHz. Ideal for applications requiring a single configuration, surface mount capability, and operating temperatures up to 150°C.
220
.15 W
10
BCV27-TP
Micro Commercial Components
BCV27-TP by Micro Commercial Components is a Small Signal BJT with hFE of 4000, VCEO of 30V, and IC of 0.5A. It is commonly used in applications requiring high DC current gain and low collector-emitter voltage.
30 V
4000
ADTA114ECAQ-13
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; Additional Features: BUILT IN BIAS RESISTANCE RATIO IS 1; HIGH RELIABILITY;
BUILT IN BIAS RESISTANCE RATIO IS 1; HIGH RELIABILITY
ADTC143TCAQ-7
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; Maximum Time At Peak Reflow Temperature (s): 30;
SDBN500B01-7
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .5 A;
60
.2 W
BA12003DF-ZE2
ROHM's BA12003DF-ZE2 is a NPN BJT transistor with 1000 min hFE, 60V max VCE, and 0.5A max IC. Ideal for switching applications in small outline packages, featuring GULL WING terminals and SILICON material.
COMPLEX
1000
R-PDSO-G16
7
16
-40 Cel
ZXTP2009ZQTA
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 152 MHz; Maximum Power Dissipation (Abs): 2.1 W; Maximum Collector Current (IC): 5.5 A;
5.5 A
53 pF
110
2.1 W
152 MHz
.185 V
ADTA113ZCAQ-7
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; Reference Standard: AEC-Q101;
33
ADTA113ZUAQ-13
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; Terminal Form: GULL WING;
ADTA113ZUAQ-7
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; JESD-609 Code: e3;
ACX115EUQ-13R
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 82;
82
ACX115EUQ-7R
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; No. of Elements: 2;
ADA123JUQ-13
PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; Package Style (Meter): SMALL OUTLINE;
HIGH RELIABILITY, BUILT IN BIAS RESISTANCE RATIO IS 21.36
ADA123JUQ-7
PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; Peak Reflow Temperature (C): 260;
ADC113TUQ-13
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; Terminal Finish: MATTE TIN;
ADC113TUQ-7
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; Terminal Form: GULL WING;
© 2023 All rights reserved
