Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
A bus driver is an electronic component that manages communication between different components or devices in a computer system. It serves as an intermediary between the CPU and other components, such as memory, input/output devices, and expansion cards. The bus driver receives signals from the CPU and routes them to the appropriate component based on the address and control signals provided.The bus driver also manages the timing of data transfer between components and ensures that the data is transferred at the correct speed and in the correct format. It may also perform error checking and correction to ensure that the data is transferred accurately.Transceivers, on the other hand, are electronic devices that transmit and receive data signals over a communication channel. They are commonly used in telecommunications, networking, and computer systems. Transceivers can be either analog or digital and may transmit data using various modulation schemes, such as amplitude modulation (AM), frequency modulation (FM), or phase modulation (PM).In computer systems, transceivers are commonly used to transmit and receive data over network cables, such as Ethernet cables or fiber optic cables. They may also be used to transmit and receive data over wireless networks, such as Wi-Fi or Bluetooth.Transceivers typically include a transmitter, a receiver, and a signal processing unit that modulates and demodulates the data signals. They may also include error correction and signal amplification circuitry to improve the quality of the transmitted data.
Add filters
All
Selected
NL17SG126P5T5G
Onsemi
NL17SG126P5T5G by Onsemi is a 3-STATE bus driver with 17.5ns propagation delay, suitable for military applications. It operates at a supply voltage range of 1.2V to 3.6V and has a small outline package with dual terminals, making it ideal for compact designs requiring fast signal transmission in harsh environments.
ENABLE HIGH
17SG
R-PDSO-F5
e3
1 mm
BUS DRIVER
.3 Amp
1
2
5
125 Cel
-55 Cel
3-STATE
TRUE
PLASTIC/EPOXY
VSOF
FL6,.03,14
RECTANGULAR
SMALL OUTLINE, VERY THIN PROFILE
TR
260
1.2/3.3
19.6 ns
Not Qualified
.4 mm
Bus Driver/Transceivers
3.6 V
.9 V
3
YES
CMOS
MILITARY
MATTE TIN
FLAT
.35 mm
DUAL
30
.8 mm
NLVVHC1G125DFT1G
NLVVHC1G125DFT1G by Onsemi is a CMOS bus driver with 5V nominal voltage, 80A max I (ol), and 16ns propagation delay. It is used in military applications due to its AEC-Q100 screening level, -55 to 125 °C operating temperature range, and TRUE output polarity.
ENABLE LOW
UNIDIRECTIONAL
AHC/VHC/H/U/V
R-PDSO-G5
2 mm
50 pF
80 Amp
TSSOP
TSSOP5,.08
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
NOT SPECIFIED
2/5.5
50 mA
16 ns
AEC-Q100
1.1 mm
5.5 V
2 V
Matte Tin (Sn) - annealed
GULL WING
.65 mm
1.25 mm
NLVSX4373DR2G
NLVSX4373DR2G by Onsemi is a bus driver with 20ns propagation delay, suitable for industrial applications. It operates at a nominal voltage of 2.8V and has 8 terminals in a small outline package style. With AEC-Q100 screening level, it offers bidirectional control with low enable input.
BIDIRECTIONAL
4000/14000/40000
R-PDSO-G8
4.9 mm
15 pF
8
85 Cel
-40 Cel
OPEN-DRAIN
SOP
SOP8,.24
SMALL OUTLINE
.02 mA
1000 ns
1.75 mm
1.5 V
2.8
INDUSTRIAL
1.27 mm
3.9 mm
NL17SG125DFT2G
NL17SG125DFT2G by Onsemi is a 3-STATE bus driver with 4.8ns propagation delay, operating at -55 to 125 °C. It has a load capacitance of 30pF and supports supply voltages of 1.2/3.3V, making it ideal for military-grade applications requiring fast signal transmission in compact spaces.
30 pF
8 Amp
TSSOP5/6,.08
20 mA
N/A
MC74HC367ADTG
MC74HC367ADTG by Onsemi is a 16-terminal bus driver with 4-bit capacity, operating b/w -55 to 125 °C. It features TRUE output polarity and 3-STATE characteristics, suitable for military-grade applications requiring CMOS technology and a supply voltage range of 2-6V.
HC/UH
R-PDSO-G16
e4
5 mm
4
16
1.2 mm
6 V
NICKEL PALLADIUM GOLD
4.4 mm
NLV74HC245ADTG
NLV74HC245ADTG by Onsemi is an 8-bit bus driver with a propagation delay of 22ns. It operates at a nominal voltage of 5V and supports common control. Ideal for bidirectional applications, it features a MILITARY-grade temperature range and AEC-Q100 screening level.
COMMON CONTROL
R-PDSO-G20
6.5 mm
BUS TRANSCEIVER
6 Amp
20
TSSOP20,.25
RAIL
2/6
NLV74HC245ADTR2G
NLV74HC245ADTR2G by Onsemi is an 8-bit bus driver with a propagation delay of 22ns at 5V. It features a small outline package, operates b/w -55 to 125 °C, and has dual terminal positions. Ideal for bidirectional control applications in military-grade environments.
NLV74HC374ADWG
NLV74HC374ADWG by Onsemi is an 8-bit bus driver with 3-STATE output, operating at a max frequency of 20MHz. It has a supply voltage range of 2-6V and can handle load capacitance up to 50pF. Ideal for applications requiring positive edge triggering in military-grade environments.
12.8 mm
20000000 Hz
SOP20,.4
2.65 mm
FF/Latches
POSITIVE EDGE
7.5 mm
NLV74HC374ADWR2G
NLV74HC374ADWR2G by Onsemi is an 8-bit bus driver with a supply voltage of 5V, operating b/w -55 to 125 °C. It features a max frequency of 20MHz and is ideal for applications requiring true output polarity and positive edge triggering in small outline packages.
NLV74HC541ADWR2G
NLV74HC541ADWR2G by Onsemi is an 8-bit bus driver with 28ns propagation delay, operating at a nominal voltage of 5V. It features a small outline package and is AEC-Q100 screened, suitable for military-grade applications requiring true output polarity and 3-STATE output characteristics.
74AUP1G125FX4-7
Diodes Incorporated
BUS DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: BALL; No. of Terminals: 6; Package Code: VFBGA; Package Shape: RECTANGULAR;
AUP/ULP/V
R-PBGA-B6
1.4 mm
1.7 Amp
6
VFBGA
BGA6,2X3,20
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
24 ns
.8 V
AUTOMOTIVE
BALL
.5 mm
BOTTOM
.9 mm
74AUP1G126FS3-7
BUS DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 4; Package Code: HVSON; Package Shape: SQUARE;
S-PDSO-N4
HVSON
LCC5(UNSPEC)
SQUARE
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
NO LEAD
.48 mm
74AUP1G126FX4-7
FST3126DTR2G
FST3126DTR2G by Onsemi is a 4-function bus driver with a supply voltage of 5V, operating temperature range of -55 to 125 °C, and propagation delay of 0.25ns. It is ideal for military-grade applications requiring true output polarity and 3-state output characteristics in a compact package style.
CBT/FST/QS/5C/B
R-PDSO-G14
14
TSSOP14,.25
.25 ns
4 V
74ALVT16245DGG,118
NXP Semiconductors
74ALVT16245DGG,118 by NXP Semiconductors is a dual 8-bit bus driver with a propagation delay of just 3.5 ns. It operates within a supply voltage range of 2.3V to 2.7V and supports industrial temperature grades from -40 °C to 85 °C. Ideal for high-speed data transmission in compact electronic designs, it features a plastic/epoxy package and surface mount design.
WITH DIRECTION CONTROL; CAN ALSO OPERATE AT 3.3V VCC
ALVT
R-PDSO-G48
48
3.5 ns
2.7 V
2.3 V
2.5
BICMOS
SN74BCT541ADBR
Texas Instruments
SN74BCT541ADBR by Texas Instruments is an 8-bit bus driver with a propagation delay of 8.2 ns at 5V, suitable for commercial applications. It features a small outline package with dual terminals and true output polarity, making it ideal for systems requiring fast signal transmission and low power consumption.
BCT/FBT
R-PDSO-G28
10.2 mm
64 Amp
28
70 Cel
0 Cel
SSOP
SMALL OUTLINE, SHRINK PITCH
72 mA
8.2 ns
4.5 V
COMMERCIAL
5.3 mm
74LVC240AQ20-13
BUS DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: RECTANGULAR;
LVC/LCX/Z
R-XQCC-N20
4.5 mm
INVERTED
UNSPECIFIED
HVQCCN
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
16.9 ns
.85 mm
1.65 V
1.8
QUAD
2.5 mm
NL7SB3257CMX1TCG
NL7SB3257CMX1TCG by Onsemi is a 6-terminal bus driver with 3-STATE output, operating b/w -55 to 125 °C. With 0.25 ns propagation delay, it supports dual ports and has a small outline package suitable for military-grade applications.
CBT/FST/Q
S-PDSO-N6
BUS EXCHANGER
VSON
4.5
NLV74LCX374DTR2G
NLV74LCX374DTR2G by Onsemi is an 8-bit bus driver with 3.3V supply, 9.5ns propagation delay, and 24A max I (ol). Ideal for industrial applications requiring a true output polarity and positive edge trigger type in a small outline package.
150000000 Hz
24 Amp
3.3
9.5 ns
NLVU1GT125AMUTCG
NLVU1GT125AMUTCG by Onsemi is a 3-STATE bus driver with 6 terminals, operating at -55 to 125 °C. It has a supply voltage range of 1.65V to 5.5V and can handle up to 8A output current with a propagation delay of 16ns. Ideal for military applications requiring compact, low-power transceivers in harsh environments.
1G
R-PDSO-N6
1.45 mm
SOLCC6,.04,20
25 mA
.55 mm
Gate
74AC16623DL
74AC16623DL by Texas Instruments is a bus driver & transceiver with 8 bits, 3-STATE output, and propagation delay of 8.6 ns. It operates at a supply voltage of 3.3/5V and has a max operating temperature of 85°C. Ideal for bidirectional data transmission in industrial applications due to its independent control feature and compact design.
WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION
INDEPENDENT CONTROL
AC
15.875 mm
SSOP48,.4
3.3/5
8.6 ns
2.79 mm
3 V
.635 mm
74ACT11245PW
74ACT11245PW by Texas Instruments is an 8-bit bus driver with a propagation delay of 10ns at 5V. It features a small outline package and operates in industrial temperature range. Ideal for bidirectional control applications requiring fast signal transmission.
WITH DIRECTION CONTROL
ACT
R-PDSO-G24
7.8 mm
24
TSSOP24,.25
10 ns
74ACT11543DW
74ACT11543DW by Texas Instruments is an 8-bit bus driver with a propagation delay of 12.1 ns and output current of 24 Amp. It operates at a supply voltage of 5V, suitable for industrial applications requiring bidirectional control in a small outline package.
INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH
17.9 mm
REGISTERED BUS TRANSCEIVER
SOP28,.4
13.2 ns
74ACT11640DW
74ACT11640DW by Texas Instruments is an 8-bit bus driver with a propagation delay of 10.5 ns at 5V, suitable for industrial applications. It features a max I (ol) of 24A, operates b/w -40 to 85°C, and has a package style of small outline. This CMOS technology device offers bidirectional control with inverted output polarity in a compact rectangular package.
WITH COMMON OUTPUT ENABLE AND DIRECTION CONTROL
15.4 mm
SOP24,.4
74ACT11821DW
74ACT11821DW by Texas Instruments is a 10-bit bus driver with a propagation delay of 12.1 ns at 5V, suitable for industrial applications. It features a max I (ol) of 24A, operates b/w -40 to 85°C, and has a surface-mount rectangular package style.
10
12.1 ns
SN74ABT162244DGG
SN74ABT162244DGG by Texas Instruments is a 4-bit bus driver with 4.8 ns propagation delay, suitable for industrial applications. It operates at a nominal voltage of 5V and features a max operating temperature of 85°C. This surface-mount device has a small outline package with dual terminal position and Gull Wing form factor.
TYP VOLP < 1V @ VCC = 5V, TA = 25 DEG C; 25 OHM OUTPUT SERIES RESISTOR
ABT
12.5 mm
12 Amp
3-STATE WITH SERIES RESISTOR
TSSOP48,.3,20
30 mA
4.8 ns
6.1 mm
SN74ABT162245DGG
SN74ABT162245DGG by Texas Instruments is an 8-bit bus driver with 3-state output and a propagation delay of 5.1 ns. It operates at a supply voltage range of 4.5V to 5.5V, making it suitable for industrial applications requiring fast signal transmission in compact spaces. This dual-function transceiver comes in a small outline package with surface-mount capability, ideal for high-speed data communication systems.
32 mA
5.1 ns
SN74ABT16373ADGG
SN74ABT16373ADGG by Texas Instruments is an 8-bit bus driver with 3-STATE output characteristics. It operates at a supply voltage range of 4.5V to 5.5V and has a propagation delay of 6.1ns, making it suitable for industrial applications requiring fast data transmission in compact spaces.
TYP VOLP < 0.8V @ VCC = 5V, TA = 25 DEG C
85 mA
6.1 ns
SN74ABT16543DGG
SN74ABT16543DGG by Texas Instruments is an 8-bit bus driver with a propagation delay of 5.1 ns and operates at a nominal voltage of 5V. It features a small outline package style, suitable for industrial applications requiring bidirectional control with independent control type.
INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION
R-PDSO-G56
14 mm
56
TSSOP56,.3,20
35 mA
5.6 ns
SN74ABT540DB
SN74ABT540DB by Texas Instruments is an 8-bit bus driver with a propagation delay of 4.8 ns at 5V, suitable for industrial applications. It features a small outline package with surface mount capability and operates within a temperature range of -40 to 85°C.
7.2 mm
SSOP20,.3
SN54F240J
SN54F240J by Texas Instruments is a TTL technology bus driver with 2 functions, 4 bits, and 20 terminals. It has a propagation delay of 6 ns at nominal voltage of 5V. Ideal for military applications due to its inverted output polarity and enable low control type.
F/FAST
R-GDIP-T20
e0
24.195 mm
CERAMIC, GLASS-SEALED
DIP
DIP20,.3
IN-LINE
TUBE
75 mA
6 ns
5.08 mm
NO
TTL
Tin/Lead (Sn/Pb)
THROUGH-HOLE
2.54 mm
7.62 mm
SN54F244J
SN54F244J by Texas Instruments is a TTL bus driver with 2 functions, 4 bits, and 20 terminals. It has a propagation delay of 7 ns at nominal voltage of 5V. Ideal for applications requiring true output polarity and enable low control type in military-grade environments.
90 mA
7 ns
SN54F373J
SN54F373J by Texas Instruments is an 8-bit bus driver with 3-STATE output, operating at a max temperature of 125°C. It features a propagation delay of 8.5 ns and supports a load capacitance of 50 pF. Ideal for military-grade applications requiring TTL technology and low enable control type.
20 Amp
55 mA
8.5 ns
SN54F374J
SN54F374J by Texas Instruments is an 8-bit bus driver with a propagation delay of 11ns at 5V. It features a 3-STATE output and operates b/w -55°C to 125°C, making it suitable for military-grade applications. With a max frequency of 60MHz, this TTL technology device is ideal for unidirectional data transmission in harsh environments.
60000000 Hz
86 mA
11 ns
SN54F623J
SN54F623J by Texas Instruments is an 8-bit bus driver with a propagation delay of 12.4 ns at 5V, ideal for military-grade applications. It features a max operating temperature of 125°C, output polarity TRUE, and independent control for bidirectional data transmission.
IOL = 20MA @ VOL = 0.5V & IOH = 3MA @ VOH = 2.4V FOR PORT A
48 Amp
140 mA
8 ns
SN74AS240N
SN74AS240N by Texas Instruments is a TTL technology bus driver with 2 functions, 4 bits, and 20 terminals. It operates at a nominal voltage of 5V with a propagation delay of 6.5ns. Ideal for applications requiring inverted output polarity and enable low control type in commercial temperature grade environments.
IOL @ VCC = 4.75V
AS
R-PDIP-T20
24.325 mm
6.5 ns
SN74F543DW
SN74F543DW by Texas Instruments is an 8-bit bus driver with a propagation delay of 8.5ns, operating at a nominal voltage of 5V. It features 3-STATE output characteristics and is designed for bidirectional control applications in commercial-grade environments. The package style is small outline, making it suitable for surface mount installations with a compact form factor.
IOL = 24MA @ VOL = 0.5V FOR PORT A; IOH = 3MA @ VOH = 2.4V FOR PORT A
125 mA
12.5 ns
Bus Driver/Transceiver
SN74F543NT
SN74F543NT by Texas Instruments is an 8-bit bus driver with a propagation delay of 8.5 ns at 5V, featuring 3-STATE output characteristics. It operates within a temperature range of 0 to 70°C and has a max power supply current of 125mA. Ideal for bidirectional data transmission in commercial-grade applications.
R-PDIP-T24
31.64 mm
DIP24,.3
SN74CBT3384DW
SN74CBT3384DW by Texas Instruments is a 10-bit bus driver with 3-STATE output, operating at a supply voltage of 5V. With a propagation delay of 0.25ns, it is ideal for industrial applications requiring fast signal transmission over dual ports. This small outline package features surface mount technology and operates within a wide temperature range from -40 to 85°C.
TTL COMPATIBLE BUS SWITCH; MAX RON = 12 OHM @ VIN = 2.4V & ION = 15MA
5.25 V
4.75 V
SN54AS821JT
SN54AS821JT by Texas Instruments is a 10-bit bus driver with 3-STATE output, operating at a supply voltage of 5V. It features a propagation delay of 11.5ns and can handle load capacitance up to 50pF. Ideal for military-grade applications requiring reliable TTL technology in an in-line package style.
POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION
R-GDIP-T24
32.005 mm
109 mA
11.5 ns
SN54AS873JT
SN54AS873JT by Texas Instruments is a 4-bit bus driver with 2 functions, featuring a propagation delay of 14 ns at 5V. With a package style of IN-LINE and through-hole terminal form, it operates in military-grade temperatures from -55 to 125°C. Ideal for applications requiring high-speed signal transmission in harsh environments.
WITH CLEAR
32 Amp
110 mA
14 ns
SN74ALS1245A-1DW
SN74ALS1245A-1DW by Texas Instruments is an 8-bit bus driver with a propagation delay of 25ns at 5V. It features a small outline package, 3-state output characteristics, and operates within a temperature range of 0 to 70°C. Ideal for bidirectional control applications requiring common control with a load capacitance of 50pF.
ALS
33 mA
13 ns
SN74ALS1645A-1DW
SN74ALS1645A-1DW by Texas Instruments is an 8-bit bus driver with a propagation delay of 25ns at 5V. It features a small outline package, operates b/w 0 to 70°C, and has a max power supply current of 36mA. Ideal for bidirectional control applications requiring true output polarity in commercial temperature grades.
WITH DIRECTION CONTROL; IOL @ VCC = 4.75V
36 mA
SN74ALS646FN
SN74ALS646FN by Texas Instruments is an 8-bit bus driver with a 5V supply voltage, 50 pF load capacitance, and 17 ns propagation delay. It features a chip carrier package style and operates in commercial temperature grade. Ideal for bidirectional data transmission in various electronic applications.
DIRECTION CONTROL; SELECT INPUT FOR MULTIPLEXED TRANSMISSION OF REGISTERED OR REAL TIME DATA
S-PQCC-J28
11.5062 mm
QCCJ
LDCC28,.5SQ
CHIP CARRIER
88 mA
17 ns
4.57 mm
J BEND
SN74ALS841FN
SN74ALS841FN by Texas Instruments is a 10-bit bus driver with 3-STATE output, operating at 5V. It features a propagation delay of 9ns and can handle a max I (ol) of 24A. This chip carrier package is suitable for applications requiring high-speed data transmission in commercial temperature environments.
R-PQCC-J28
62 mA
9 ns
SN74ALS992FN
SN74ALS992FN by Texas Instruments is a 9-bit bus driver with 3-STATE output characteristics. It operates at a nominal voltage of 5V and has a propagation delay of 25ns. This chip carrier package is suitable for applications requiring TTL technology in commercial temperature grades.
WITH READ-BACK
9
80 mA
25 ns
SN54BCT126AJ
SN54BCT126AJ by Texas Instruments is a 4-function bus driver with 7.7 ns propagation delay at 5V, ideal for military applications. Featuring 3-STATE output characteristics, it operates b/w -55 to 125 °C and has a max power supply current of 51 mA. With a package style of IN-LINE, it offers true output polarity and Tin/Lead terminal finish.
R-GDIP-T14
19.56 mm
DIP14,.3
51 mA
7.7 ns
SN64BCT240N
SN64BCT240N by Texas Instruments is a 20-terminal bus driver with 4 bits, featuring a propagation delay of 6.4 ns and max I (ol) of 64 Amp. It operates at a nominal voltage of 5V and is ideal for industrial applications requiring fast signal transmission in electronic circuits.
71 mA
4.5 ns
© 2023 All rights reserved
