Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
MX877RTR
IXYS Corporation
MX877RTR by IXYS Corp is a peripheral driver with 28 terminals, operating voltage range of 2.7V to 60V, and max output current of 0.08A. It is ideal for industrial applications requiring register-based interface ICs in compact spaces due to its small size (5x5mm) and quad terminal position.
8
REGISTER BASED PERIPHERAL DRIVER
S-PQCC-N28
5 mm
3
1
28
85 Cel
-40 Cel
.08 A
PLASTIC/EPOXY
HVQCCN
LCC28,.2SQ,20
SQUARE
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
260
5,42
Not Qualified
1 mm
Peripheral Drivers
5.5 V
2.7 V
5 V
60 V
6 V
42 V
YES
INDUSTRIAL
NO LEAD
.5 mm
QUAD
30
MIC2026-1BMTR
Micrel
MIC2026-1BMTR by Micrel is a small outline peripheral driver with 8 terminals in a rectangular package. It features tin/lead terminal finish, industrial temperature grade, and Gull Wing terminal form. Ideal for buffer or inverter-based interface ICs, it has a peak reflow temp of 240°C and max seated height of 1.73mm.
BUFFER OR INVERTER BASED PERIPHERAL DRIVER
R-PDSO-G8
e0
4.93 mm
SOP
RECTANGULAR
SMALL OUTLINE
240
1.73 mm
Tin/Lead (Sn85Pb15)
GULL WING
1.27 mm
DUAL
3.94 mm
AMIS39101PNPB4G
Onsemi
AMIS39101PNPB4G by Onsemi is a Peripheral Driver with 8-bit driver, operating at -40 to 85°C. It has built-in protections for transient, over current, and thermal issues. Suitable for industrial applications requiring a max supply voltage of 5.5V and power supplies of 3.3/5V.
TRANSIENT; OVER CURRENT; THERMAL
R-PDSO-G28
e3
17.8816 mm
2
SOURCE
SOP28,.4
3.3/5
2.6416 mm
3.1 V
3.3 V
28 V
3.5 V
4.6 V
TIN
7.5184 mm
AMIS39101PNPB4RG
AMIS39101PNPB4RG by Onsemi is an 8-bit BUFFER OR INVERTER BASED PERIPHERAL DRIVER with a max supply voltage of 5.5V and built-in protections for TRANSIENT, OVER CURRENT, THERMAL. It is ideal for industrial applications requiring SOURCE output current flow direction and operates in a temperature range from -40 to 85 °C.
BD2045AFJ-E2
ROHM
ROHM's BD2045AFJ-E2 is a peripheral driver with 8 terminals, operating voltage of 2.7-5.5V, and output current limit of 0.5A. It offers overcurrent, thermal, and undervoltage protection, suitable for industrial applications requiring sink current flow control in a compact small outline package design.
OVER CURRENT; THERMAL; UNDER VOLTAGE
4.9 mm
SINK
.25 A
.5 A
SOP8,.25
NOT SPECIFIED
5
1.65 mm
40 us
20000 us
3.9 mm
A6832SEPTR-T
Allegro MicroSystems
Allegro MicroSystems' A6832SEPTR-T is a SIPO-based peripheral driver with 44 terminals, operating at -40 to 85°C. It supports a max supply voltage of 5.5V and output current up to 0.1A, making it ideal for industrial applications requiring sink current flow direction in a compact chip carrier package.
SIPO BASED PERIPHERAL DRIVER
S-PQCC-J44
16.59 mm
44
.1 A
125 A
QCCJ
LDCC44,.7SQ
CHIP CARRIER
4.57 mm
3 V
BIMOS
Matte Tin (Sn)
J BEND
40
AD5750BCPZ
Analog Devices
AD5750BCPZ by Analog Devices is a peripheral driver with 32 terminals, operating voltage of 12-24V, and built-in transient & over current protections. It has a compact square package shape suitable for industrial applications requiring source/sink output current flow control. With a max supply current of 6.2mA and peak reflow temperature of 260°C, it offers reliable performance in harsh environments.
TRANSIENT; OVER CURRENT
S-XQCC-N32
32
105 Cel
SOURCE AND SINK
.015 A
UNSPECIFIED
LCC32,.2SQ,20
3/5,+-12/+-24
6.2 mA
24 V
12 V
MATTE TIN
AD5751BCPZ
AD5751BCPZ by Analog Devices is a peripheral driver with 32 terminals, operating voltage range of 2.7-5.5 V, and built-in over current protection. It features a square package shape, matte tin terminal finish, and industrial temperature grade suitability. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
OVER CURRENT
3/5,12/55
DRV101FKTWTG3
Texas Instruments
DRV101FKTWTG3 by Texas Instruments is a peripheral driver with a max supply voltage of 60V and built-in protections for over current and thermal issues. With a nominal output peak current limit of 2.3A, it is ideal for industrial applications requiring sink output current flow direction in small outline packages.
OVER CURRENT; THERMAL
R-PSSO-G7
10.095 mm
7
1 A
2.3 A
SMSIP7H,.55,50TB
245
24
4.955 mm
9 V
BIPOLAR
SINGLE
8.89 mm
CS4192XDWF16
CS4192XDWF16 by Onsemi is a peripheral driver with max supply voltage of 5.5V, built-in protections for over current and thermal issues. It operates in industrial temperature range and is ideal for applications requiring half bridge based peripheral drivers with source and sink output current flow direction.
HALF BRIDGE BASED PERIPHERAL DRIVER
R-PDSO-G16
10.3 mm
16
SOP16,.4
235
5,7.5/14
2.65 mm
4.5 V
14 V
7.5 V
BICMOS
Tin/Lead (Sn/Pb)
7.5 mm
CS4192XDWFR16
CS4192XDWFR16 by Onsemi is a half bridge peripheral driver with 16 terminals. It operates b/w -40 to 105 °C, with a supply voltage range of 4.5-14 V. Suitable for industrial applications, it offers built-in protections against over current and thermal issues.
DRV590DWP
Texas Instruments DRV590DWP is a 20-terminal peripheral driver with built-in protections for over current and thermal issues. It operates at supply voltages of 2.7-5.5V, making it suitable for industrial applications requiring a nominal output peak current limit of 1.22A and an interface IC type of HB based peripheral driver with PWM control.
HB BASED PERIPHERAL DRIVER WITH PWM
R-PDSO-G20
e4
12.825 mm
20
1.22 A
HSOP
SOP20,.4
SMALL OUTLINE, HEAT SINK/SLUG
3/5
NICKEL PALLADIUM GOLD
7.52 mm
DRV591VFP
DRV591VFP by Texas Instruments is a peripheral driver with 2 functions, operating at 3/5V. It offers built-in protections for over current, thermal, and under voltage. With a package style of flatpack and low profile, it is ideal for industrial applications requiring differential input characteristics.
DIFFERENTIAL
S-PQFP-G32
7 mm
3 A
HLQFP
QFP32,.35SQ,32
FLATPACK, HEAT SINK/SLUG, LOW PROFILE
1.6 mm
2.8 V
.8 mm
STA505
STMicroelectronics
STA505 by STMicroelectronics is a half-bridge peripheral driver with a max supply voltage of 36V and operates in -40 °C to 90 °C. It features built-in protections against overcurrent, thermal issues, and undervoltage. Ideal for industrial applications, it supports up to 6A output current.
R-PDSO-G36
15.9 mm
4
36
90 Cel
6 A
HSSOP
SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH
3.43 mm
36 V
10 V
30 V
BCD
.65 mm
.1 us
11 mm
ST890BD
ST890BD by STMicroelectronics is a versatile peripheral driver with a max supply voltage of 5.5V and operates in industrial temperatures from -40 °C to 85 °C. It features built-in overcurrent and thermal protections, ensuring reliability. Ideal for buffer or inverter applications, it supports output currents up to 1.2A.
1.2 A
1.75 mm
10 us
50 us
DRV594VFPR
DRV594VFPR by Texas Instruments is a 32-terminal peripheral driver with built-in protections for over current, thermal, and under voltage. It operates at supply voltages of 2.8-5.5V and can handle a max output current of 3A. Ideal for industrial applications requiring PWM-based interface ICs in compact spaces due to its low profile flatpack package style.
MAX4821EUP
Maxim Integrated
MAX4821EUP by Maxim Integrated is a Peripheral Driver with 8-bit driver, 0.15A output current, and 5.5V max supply voltage. It is used in industrial applications for buffer or inverter-based peripheral driving tasks due to its BICMOS technology and transient protection features.
TRANSIENT
6.5 mm
.15 A
.07 A
TSSOP
LCC20,.16SQ,20
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
1.1 mm
2.3 V
TIN LEAD
1 us
4.4 mm
L9820D013TR
L9820D013TR from STMicroelectronics is a robust peripheral driver designed for industrial applications, operating b/w 6V and 25V. It features built-in protections against overcurrent, overvoltage, and thermal issues. With an operating temp range of -40 °C to 85°C, it ensures reliability in harsh environments.
OVER CURRENT; OVER VOLTAGE; THERMAL
14.4
25 V
14.4 V
NUD3112LT1
NUD3112LT1 by Onsemi is a small outline, thin profile peripheral driver with built-in transient protection. It operates in industrial temperature range (-40 to 85°C) and has a max output current of 0.5A. Ideal for applications requiring sink output current flow direction at 12V nominal voltage.
R-PDSO-G3
2.9 mm
TO-236
1.11 mm
.95 mm
1.3 mm
NUD3112DMT1
NUD3112DMT1 by Onsemi is a peripheral driver with 2 functions, built-in transient protection, and can handle up to 0.5A output current. It is designed for industrial applications requiring a 12V nominal voltage and operates in temperatures ranging from -40°C to 85°C. The package style is small outline with gull wing terminals, making it suitable for surface mount installations.
R-PDSO-G6
3 mm
6
TSOP6,.11,37
1.5 mm
STA508
STA508 by STMicroelectronics is a half-bridge peripheral driver with a max supply voltage of 36V and supports up to 6A output current. It operates in extreme temps from -40 °C to 90 °C, ensuring reliability in industrial applications. Built-in thermal and under-voltage protections enhance safety.
THERMAL; UNDER VOLTAGE
SSOP
SMALL OUTLINE, SHRINK PITCH
Matte Tin (Sn) - annealed
DRV101FKTWT
Texas Instruments' DRV101FKTWT is a peripheral driver with 1A output current, 24V nominal voltage, and overcurrent protection. Ideal for industrial applications requiring sink output current flow direction and operating temperatures from -40 to 85°C.
DS2482S-800
DS2482S-800 by Maxim Integrated is a peripheral driver with 8 functions, operating voltage range of 2.9V to 5.5V, and industrial temperature grade. It is used as a buffer or inverter based peripheral driver in various applications requiring source current flow direction control.
ALSO OPERATES AT 5V SUPPLY
9.9 mm
2.9 V
NUD3112LT1G
NUD3112LT1G by Onsemi is a CMOS technology-based peripheral driver with a max output current of 0.5A. It features built-in transient protection and operates in industrial temperature grade range (-40 to 85°C). This small outline, thin profile device is ideal for applications requiring sink output current flow direction.
CMOS
MDC3105LT1G
MDC3105LT1G by Onsemi is a Peripheral Driver with 3 terminals, operating voltage range of 3-6V, and max output current of 0.25A. It is a small outline IC suitable for industrial applications requiring transient protection and sink output current flow. The package style is thin profile with matte tin finish, making it ideal for surface mount designs in various electronic systems.
DS2482S-100
DS2482S-100 by Maxim Integrated is a peripheral driver with 8 terminals, operating at -40 to 85°C. It has a supply voltage range of 2.9V to 5.5V and is ideal for industrial applications requiring buffer or inverter-based interface ICs with a source current flow direction.
MAX1558HETB
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE;
S-XDSO-N10
10
2 A
HVSON
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
2.75 V
1000 us
4000 us
AD8511ARUZ-REEL
AD8511ARUZ-REEL by Analog Devices is a CMOS technology-based peripheral driver with 11 functions. It operates b/w -40 to 85 °C, with supply voltage range of 3.3V to 6.5V. This small outline, thin profile IC is ideal for industrial applications requiring buffer or inverter based interface ICs.
R-PDSO-G48
12.5 mm
11
48
.35 A
1.2 mm
6.5 V
6.1 mm
MDC3105DMT1
MDC3105DMT1 by Onsemi is a Peripheral Driver with 6 terminals, operating at 5V. It offers built-in transient protection and can handle a max output current of 0.25A. Ideal for industrial applications requiring a compact, surface-mount solution with sink flow direction.
SI9986DY-E3
Vishay Intertechnology
Vishay Intertechnology's SI9986DY-E3 is a half bridge based peripheral driver with 8 terminals. It operates in industrial temperature range (-40 to 85°C) and supports a supply voltage range of 3.8V to 13.2V. The device offers built-in transient protection and is suitable for various applications requiring source and sink output current flow control.
250
13.2 V
3.8 V
STA50513TR
STA50513TR by STMicroelectronics is a half-bridge peripheral driver with a max supply voltage of 36V and operates in -40 °C to 90 °C. It features built-in protections against overcurrent, thermal issues, and undervoltage. Ideal for industrial applications, it supports up to 6A output current.
DRV591VFPG4
DRV591VFPG4 by Texas Instruments is a peripheral driver with 2 functions, operating at supply voltages of 3-5V. It offers built-in protections for over current, thermal, and under voltage conditions. With a package style of flatpack and gull wing terminals, it is ideal for industrial applications requiring PWM-based peripheral drivers.
DRV591VFPRG4
DRV591VFPRG4 by Texas Instruments is a peripheral driver with 2 functions, operating at 3/5V. It offers built-in protections against over current, thermal issues, and under voltage. With a package style of flatpack and low profile, it is ideal for industrial applications requiring differential input characteristics.
AD5749ACPZ-RL7
AD5749ACPZ-RL7 by Analog Devices is a Peripheral Driver with 32 terminals, operating voltage range of 2.7V to 5.5V, and max supply current of 6.2mA. It is used in industrial applications requiring a buffer or inverter based peripheral driver with source output current flow direction.
55 V
10.8 V
TPS2034DRG4
TPS2034DRG4 by Texas Instruments is a MOS technology-based peripheral driver with a max output current of 2A. It operates b/w -40 to 85°C, suitable for industrial applications. With built-in protections against overcurrent, thermal issues, and undervoltage, it has a small outline package style ideal for space-constrained designs.
STANDARD
.1 mA
MOS
40000 us
UDQ2982LW-T
Allegro MicroSystems' UDQ2982LW-T is a peripheral driver with 8 functions, operating at -40 to 85°C. It has a max output current of 0.35A and built-in transient protection. Ideal for industrial applications requiring a small outline package with source flow direction and turn-on time of 2µs.
R-PDSO-G18
11.55 mm
18
SOP18,.4
50 V
35 V
2 us
CS4122XDWF24G
CS4122XDWF24G by Onsemi is a 24-terminal peripheral driver with max supply voltage of 5.5V and built-in protections for over current and thermal issues. It operates in industrial temperature range, suitable for applications requiring buffer or inverter based interface ICs with source and sink output current flow direction.
R-PDSO-G24
15.395 mm
SOP24,.4
5,12
CS8190EDWF20G
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
OVER VOLTAGE
12.8 mm
.01 A
16 V
8.5 V
13.1 V
Tin (Sn)
CS8190ENF16G
CS8190ENF16G by Onsemi is a 16-terminal peripheral driver with a supply voltage range of 8.5V to 16V. It offers overvoltage protection, operates in industrial temperatures (-40 °C to 85°C), and has a nominal output peak current limit of 0.01A. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink output current flow direction.
R-PDIP-T16
19.175 mm
DIP
IN-LINE
4.44 mm
NO
THROUGH-HOLE
2.54 mm
7.62 mm
NCP3712ASNT1G
NCP3712ASNT1G by Onsemi is a Peripheral Driver with 12.5V power supply, 0.3A max output current, and built-in overvoltage protection. It is used in industrial applications requiring a compact design and reliable performance for driving peripherals like buffers or inverters.
OVER VOLTAGE; TRANSIENT
.3 A
12.5
12.5 V
SN754410NEE4
SN754410NEE4 by Texas Instruments is a 16-terminal peripheral driver with 2 functions. It operates b/w -40 to 85 °C, supporting a max supply voltage of 36 V and output current up to 1 A. Ideal for industrial applications requiring true output polarity and built-in transient/thermal protections.
TRANSIENT; THERMAL
19.177 mm
3-STATE
TRUE
5.08 mm
70 mA
.8 us
.4 us
TPS2021DG4
TPS2021DG4 by Texas Instruments is a MOS technology-based peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates at supply voltages of 2.7V to 5.5V and has a max output current of 0.6A. Ideal for industrial applications requiring a compact small outline package with source flow direction.
TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
.6 A
.9 A
TPS2022DG4
TPS2022DG4 by Texas Instruments is a MOS technology-based peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates b/w -40 to 125°C with a supply voltage range of 2.7-5.5V and can handle a max output current of 1A. Ideal for industrial applications requiring buffer or inverter based peripheral drivers.
125 Cel
1.5 A
TPS2030DRG4
TPS2030DRG4 by Texas Instruments is a MOS technology-based peripheral driver with a max supply voltage of 5.5V and built-in protections for over current, thermal, and under voltage. This small outline package driver has a nominal output peak current limit of 0.3A and is ideal for industrial applications requiring buffer or inverter based interface ICs with a turn-on time of 20ms and turn-off time of 40ms.
.2 A
Nickel/Palladium/Gold (Ni/Pd/Au)
TPS2031DG4
TPS2031DG4 by Texas Instruments is a MOS technology-based peripheral driver with a max supply voltage of 5.5V and built-in protections for over current, thermal, and under voltage. It has a max output current of 0.6A and is ideal for industrial applications requiring a small outline package with gull wing terminal form.
TPS2031DRG4
TPS2031DRG4 by Texas Instruments is a MOS technology-based peripheral driver with 8 terminals. It operates b/w -40 to 85°C, with a supply voltage range of 2.7-5.5V and max output current of 0.6A. Ideal for industrial applications requiring overcurrent, thermal, and undervoltage protection mechanisms.
TPS2032DG4
TPS2032DG4 by Texas Instruments is a MOS technology-based peripheral driver with 8 terminals. It operates b/w -40 to 85°C, with a supply voltage range of 2.7-5.5V and max output current of 1A. Ideal for industrial applications requiring overcurrent, thermal, and undervoltage protection mechanisms.
TPS2033DRG4
TPS2033DRG4 by Texas Instruments is a MOS technology-based peripheral driver with 1.5A output current and 3.3V nominal voltage. It offers built-in protections for overcurrent, thermal, and undervoltage conditions, making it ideal for industrial applications requiring a compact small outline package design.
2.2 A
© 2023 All rights reserved
