Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF AND BASEBAND CIRCUIT;
Median Price
$35.890
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Aztec Data Supply Inc.
$12.710
Corohmni
$15.217
Netroflash
$34.095
$33.377
Continental Prestige Electronics
$35.172
Advanced Electronics
$36.607
Argo Parts USA
Cellphone ICs SARA-R500S-00B attributes and parameters. Explore more Cellphone ICs devices from U-blox Ag
Telecom IC Type:
SARA-R500S-00B Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Our world is moving fast, soon your car will drive itself and you will carry your doctor in your pocket. Your home will power the grid and you will be connected like never before. At u-blox we are setting the beat delivering the core technology to locate and wirelessly connect people, machines and everything else making us the agile and reliable partner that will take you beyond expectations. With our innovative products and services, we empower customers to locate their devices and connect them from silicon to cloud. Ever since three bright ETH doctorate students and their professor founded u-blox in 1997, two things have driven everything we do: a desire to innovate and a constant focus on giving our customers a real competitive edge.
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
EU2B-YS3303C
Idec
ROTARY SWITCH;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LL4148
Transys Electronics
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
1N4148W-7-F
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
1N4148WS
Changzhou Galaxy Century Microelectronics
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CC113LRTKT
The Texas Instruments CC113LRTKT is a cellphone IC with 20 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 3V, making it ideal for telecom applications.
LMH2120UMX/NOPB
LMH2120UMX/NOPB by Texas Instruments is a Cellphone IC with 6 terminals in a very thin profile grid array package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit requires 4mA supply current at 4.5V, making it ideal for cellphone applications.
HMC682LP6CTR
Analog Devices
Analog Devices' HMC682LP6CTR is a 40-terminal cellphone IC with a package style of chip carrier, heat sink/slug, and very thin profile. Operating temperature ranges from -40 to 85 °C, making it suitable for industrial telecom applications requiring RF and baseband circuit integration at a nominal voltage of 5V.
HMC377QS16G
Analog Devices' HMC377QS16G is a cellphone IC with 16 terminals in a small outline package. It operates b/w -40°C to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 5V, making it ideal for telecom applications.
ADRF5545ABCPZN
Analog Devices' ADRF5545ABCPZN is a 40-terminal cellphone IC with a square package shape and nickel palladium gold finish. It operates b/w -40 to 105 °C, suitable for industrial telecom applications requiring RF and baseband circuit integration. The chip carrier has a very thin profile, measures 6x6 mm, and supports a nominal voltage of 5V.
SKY13522-644LF
Skyworks Solutions
SKY13522-644LF by Skyworks Solutions is a cellphone IC with 8 terminals in a square package. It operates b/w -30°C to 90°C, suitable for RF and baseband circuits. With a compact size of 1.1mm x 1.1mm and terminal pitch of 0.4mm, it's ideal for telecom applications requiring low-profile components.
TLV321AC36CN
TLV321AC36CN by Texas Instruments is a Cellphone IC with 20 terminals, CMOS technology, and 3V supply voltage. It has a rectangular package style, suitable for baseband circuits in commercial temperature grades. Dimensions are 7.62mm width, 24.325mm length, and 5.08mm seated height for through-hole mounting at temperatures ranging from 0 to 70°C.
SARA-R510AWS-01B
U-blox Ag
TELECOM CIRCUIT;
CC2400-STB1
CC2400-STB1 by Texas Instruments is a cellphone IC with 48 terminals in a square chip carrier package. It operates at temperatures from -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 1.8V, making it ideal for telecom applications.
LMH6522SQ/NOPB
LMH6522SQ/NOPB by Texas Instruments is a 54-terminal cellphone IC with a package style of CHIP CARRIER. It operates b/w -40 to 85°C, has 4 channels, and a gain tolerance of 25.74 dB. This RF and baseband circuit is ideal for industrial telecom applications due to its low supply current of 485 mA at 5V.
CC1000-RWP2
CC1000-RWP2 by Texas Instruments is a Cellphone IC with 28 terminals in a rectangular package. It operates at temperatures from -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a supply voltage of 3V, making it ideal for cellphone applications.
AD607ARS
AD607ARS by Analog Devices is a cellphone IC with 20 terminals in a small outline package. It operates b/w -25°C to 85°C, with a supply voltage of 3V. Ideal for baseband circuits, it features gull wing terminals and tin lead finish for surface mounting applications.
HPA00420RGVR
Texas Instruments' HPA00420RGVR is a cellphone IC with 16 terminals in a square chip carrier package. Operating from -40 to 85°C, it's ideal for RF and baseband circuits. With nickel palladium gold finish, it offers a nominal voltage of 3V and terminal pitch of 0.65mm.
AD6655ABCPZRL7-150
AD6655ABCPZRL7-150 by Analog Devices is a cellphone IC with 64 terminals, operating at -40 to 85 °C. It has a supply voltage of 1.8V and consumes 0.805mA current. This BASEBAND CIRCUIT IC comes in a SQUARE package style, suitable for telecom applications.
LT5575EUF#TRPBF
Analog Devices' LT5575EUF#TRPBF is a cellphone IC with 16 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 5V, making it ideal for telecom applications.
MPCI-L200-03S-03
TRF3702IRHCG4
TRF3702IRHCG4 by Texas Instruments is a cellphone IC with 16 terminals, operating at -40 to 85°C. It features a supply voltage of 5V, RF and baseband circuit for telecom applications, and a compact square chip carrier package suitable for surface mounting.
NRF9160-SICA-B1A-R
Nordic Semiconductor Asa
Nordic Semiconductor's NRF9160-SICA-B1A-R is a rectangular GRID ARRAY cellphone IC with 127 terminals, operating from -40 to 85°C. It features RF and baseband circuits for telecom applications, with a supply voltage of 3.8V and terminal pitch of 0.5mm, suitable for industrial-grade usage.
TCM320AC56N
TCM320AC56N by Texas Instruments is a BASEBAND CIRCUIT for cellphones. It operates b/w -40 to 85°C with 5V supply voltage. The IC has 20 terminals in an IN-LINE package measuring 7.62mm x 24.325mm x 5.08mm (WxLxH).
MAX4003EBL+
Maxim Integrated
MAX4003EBL+ by Maxim Integrated is a CELLPHONE IC with 8 terminals in a GRID ARRAY package. Operating temp range -40 to 85°C, suitable for RF and baseband circuits. Features very thin profile, fine pitch, and terminal finish of TIN SILVER COPPER.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SARA-R510M8S-00B
SARA-R410M-02B
SARA-R410M-02B by U-blox Ag is a CELL IC with RECTANGULAR package, 96 terminals, and operates b/w -20 to 65 °C. It is used for RF and baseband circuits in telecom applications due to its 3.8V supply voltage and compact size of 16x26mm.
SARA-R410M-02B-01
SARA-R410M-02B-01 by U-blox Ag is a CELLPHONE IC with 96 terminals in a RECTANGULAR GRID ARRAY package. It operates b/w -20°C to 65°C, ideal for RF and baseband circuits. With a supply voltage of 3.8V, it's suitable for commercial telecom applications.
SARA-R422S-00B
SARA-R422S-01B
SARA-R422M8S-00B
SARA-R422-00B
SARA-R422M10S-01B
SARA-R410M-02B-04
RF AND BASEBAND CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 96; Package Code: LGA; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 4;
SARA-R510S-01B
SARA-U201-04B-00
TELECOM CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: BUTT; No. of Terminals: 96; Package Code: BCC; Package Shape: RECTANGULAR;
SARA-R410M-02B-03
RF AND BASEBAND CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 96; Package Code: LGA; Package Shape: RECTANGULAR;
SARA-U201-03B-00
SARA-R500S-01B
SARA-R412M-02B
SARA-R412M-02B by U-blox Ag is a Cellphone IC with 96 terminals in a rectangular grid array package. Operating b/w -20°C to 65°C, it integrates RF and baseband circuits for telecom applications. With a nominal voltage of 3.8V, this surface-mount IC measures 16mm x 26mm and has a low seated height of 2.78mm suitable for compact devices.
SARA-R422-01B
SARA-R510M8S-61B
SARA-R412M-02B-03
SARA-R500S-61B-00
RF AND BASEBAND CIRCUIT; Terminal Form: NO LEAD; No. of Terminals: 96; Package Code: LGA; Package Shape: RECTANGULAR; JESD-30 Code: R-XLGA-N96;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved