Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 30 W; Maximum Collector Current (IC): 15 A; No. of Elements: 1;
Median Price
$2.930
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
DigiKey
1+ parts
100+ parts
$1.316
1k+ parts
$0.984
10k+ parts
$0.926
Microchip USA
$11.765
-
QUARKTWIN TECHNOLOGY LTD
Northwest PG Solutions
$3.273
Native Components
$3.240
Insulated Gate Bipolar Transistors (IGBT) GT15J341,S4X attributes and parameters. Explore more Insulated Gate Bipolar Transistors (IGBT) devices from Toshiba
Case Connection:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Maximum Gate-Emitter Voltage:
JEDEC-95 Code:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Turn Off Time (toff):
Nominal Turn On Time (ton):
Maximum VCEsat:
GT15J341,S4X Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
Weitron Technology
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
FF650R17IE4DB2BOSA1
Infineon Technologies
Infineon Technologies' FF650R17IE4DB2BOSA1 is a N-CHANNEL IGBT with 2 elements, diode, and thermistor. It offers VCEsat of 2.45V, IC of 930A, and Pmax of 4150W. Ideal for power control applications due to its high voltage rating (1700V) and fast switching times (ton:765ns, toff:1870ns).
CM600DU-12NFH
Mitsubishi Electric
Mitsubishi Electric's CM600DU-12NFH is a N-CHANNEL IGBT with 2 elements, each with built-in diode. It has a max VCEsat of 2.7V and can handle up to 600A collector current. Ideal for power control applications, this IGBT operates at a max temperature of 150°C and has an isolated case connection.
IRG4BC40UPBF
IRG4BC40UPBF by Infineon is an N-CHANNEL IGBT with 600V max collector-emitter voltage, 40A max collector current, and 160W max power dissipation. Ideal for power control applications, it has a single configuration in a rectangular package with through-hole terminals. Operating temperature ranges from -55 to 150°C.
IRG4BC30SPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 100 W; Maximum Collector Current (IC): 34 A; No. of Elements: 1;
FS400R07A3E3BOMA1
FS400R07A3E3BOMA1 by Infineon is an N-CHANNEL IGBT with 6 elements in a bridge configuration. It has a max VCEsat of 1.7V and can handle up to 500A of collector current. Ideal for power control applications, it offers fast turn-off time (430ns) and high power dissipation (1250W).
CM300DU-24NFH
Powerex
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 300 A; Transistor Element Material: SILICON; Terminal Position: UPPER;
IXGH10N170A
Littelfuse
IXGH10N170A by Littelfuse is an N-CHANNEL IGBT with 1700V max collector-emitter voltage, 10A max collector current, and 240ns nominal turn off time. Ideal for motor control applications due to its single configuration and through-hole terminal form.
SKM145GB066D
Semikron International
Semikron International's SKM145GB066D is an N-CHANNEL IGBT with 2 SERIES CONNECTED elements. It has a Max VCEsat of 1.9V and can handle up to 195A of Collector Current. Ideal for POWER CONTROL applications, this IGBT operates at a max temperature of 175°C with a fast Turn Off Time of 536ns.
FP50R07N2E4B11BOSA1
FP50R07N2E4B11BOSA1 by Infineon Technologies is an N-CHANNEL IGBT with 7 elements, 31 terminals, and a max IC of 70 A. It has a VCE of 650 V and toff of 265 ns. Ideal for power control applications due to its fast ton of 43 ns and UL approval.
SK15DGDL126ET
SK15DGDL126ET by Semikron International is an N-CHANNEL IGBT with 1200V VCEsat, 22A IC, and 475ns toff. Ideal for POWER CONTROL applications due to its complex configuration and SILICON material. Package style is FLANGE MOUNT with 23 terminals and operates up to 150°C.
HGTG20N60A4D
Intersil
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 290 W; Maximum Collector Current (IC): 70 A; Maximum Fall Time (tf): 73 ns;
FP75R12KE3BOSA1
FP75R12KE3BOSA1 by Infineon Technologies is an N-CHANNEL IGBT with 7 elements and a max collector-emitter voltage of 1200V. It has a nominal turn-off time of 610ns and a max collector current of 105A, making it suitable for high-power applications like industrial motor drives and renewable energy systems.
IGP50N60TXKSA1
IGP50N60TXKSA1 by Infineon Technologies is an N-CHANNEL IGBT transistor with a max collector-emitter voltage of 600V and a max collector current of 100A. It has a nominal turn-off time of 396ns and a turn-on time of 60ns, making it suitable for power control applications. The transistor comes in a rectangular package style with through-hole terminals and can operate at temperatures up to 175°C.
IXBX75N170
IXYS Corporation
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1040 W; Maximum Collector Current (IC): 200 A; JESD-30 Code: R-PSIP-T3;
IXYP20N65C3D1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Maximum Collector Current (IC): 50 A; No. of Terminals: 3;
IRG4PC50SPBF
IRG4PC50SPBF by Infineon Technologies is an N-CHANNEL IGBT with a max Collector-Emitter Voltage of 600V and Max Collector Current of 70A. It has a Nominal Turn Off Time of 1700ns, making it suitable for high-power applications like motor drives and inverters. The package style is FLANGE MOUNT with a Max Power Dissipation of 200W at an operating temperature up to 150°C.
FS100R12PT4BOSA1
FS100R12PT4BOSA1 by Infineon is a N-CHANNEL IGBT with 6 elements in BRIDGE configuration. It has a max voltage of 1200V, current of 135A, and turn off time of 600ns. Ideal for POWER CONTROL applications due to its fast switching times and high current handling capabilities.
IRG4BC40WLPBF
IRG4BC40WLPBF by Infineon Technologies is an N-CHANNEL IGBT transistor with a max collector-emitter voltage of 600V and a max collector current of 40A. It has a power dissipation of 160W, making it suitable for power control applications. With a turn-off time of 294ns and turn-on time of 48ns, it offers efficient performance in high-power systems.
FS25R12KE3GBOSA1
FS25R12KE3GBOSA1 by Infineon Technologies is an N-CHANNEL IGBT with 6 elements in a BRIDGE configuration. It has a max collector-emitter voltage of 1200V and can handle a max collector current of 40A. This IGBT is commonly used in applications requiring high power switching capabilities at temperatures up to 150°C.
IKW25T120FKSA1
IKW25T120FKSA1 by Infineon Technologies is an N-CHANNEL IGBT with a max collector-emitter voltage of 1200V and a max collector current of 50A. It has a nominal turn-off time of 790ns and is designed for power control applications. The transistor comes in a rectangular package with through-hole terminals, making it suitable for high-power switching operations at temperatures up to 150°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GT15Q301
Toshiba
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 170 W; Maximum Collector Current (IC): 15 A; Transistor Element Material: SILICON;
GT15J321
GT15Q101
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; Maximum Collector Current (IC): 15 A; No. of Elements: 1;
GT15Q102
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 170 W; Maximum Collector Current (IC): 15 A; Terminal Position: SINGLE;
GT15N101
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 15 A; Terminal Position: SINGLE; JESD-609 Code: e0;
GT15J102
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 35 W; Maximum Collector Current (IC): 15 A; Terminal Form: THROUGH-HOLE;
GT15H101
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 15 A; Transistor Element Material: SILICON; Qualification: Not Qualified;
GT15Q311
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Collector Current (IC): 15 A; Package Style (Meter): SMALL OUTLINE; Maximum Collector-Emitter Voltage: 1200 V;
GT15J103(SM)
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 70 W; Maximum Collector Current (IC): 15 A; Maximum VCEsat: 4 V;
GT15J331(2-10S1C)
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 15 A; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY;
GT15J331(2-10S2C)
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Collector Current (IC): 15 A; Terminal Finish: TIN LEAD; Qualification: Not Qualified;
GT15J311(SM)
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 70 W; Maximum Collector Current (IC): 15 A; No. of Terminals: 2;
GT15J301
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 35 W; Maximum Collector Current (IC): 15 A; Maximum Fall Time (tf): 300 ns;
GT15J341
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 30 W; Maximum Collector Current (IC): 15 A; Terminal Position: SINGLE;
GT15J331
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 70 W; Maximum Collector Current (IC): 15 A; Terminal Position: SINGLE;
GT15G101
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 2 W; Maximum Collector Current (IC): 15 A; Maximum Rise Time (tr): 500 ns;
GT15J101
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 100 W; Maximum Collector Current (IC): 15 A; Package Body Material: PLASTIC/EPOXY;
GT15J311
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 70 W; Maximum Collector Current (IC): 15 A; Nominal Turn Off Time (toff): 500 ns;
GT15M321
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 55 W; Maximum Collector Current (IC): 15 A; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved