Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SN74S1051PWR by Texas Instruments is a 12-bit diode bus termination array with a supply voltage range of 4.75V to 5.25V. It features a small outline, thin profile package style and operates b/w 0°C to 70°C. Ideal for data bus termination applications requiring up to 12 signal lines in commercial temperature grade environments.
Median Price
$4.315
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$4.130
100+ parts
$2.540
1k+ parts
$2.400
10k+ parts
$2.370
DigiKey
$4.500
$2.847
$2.786
-
Digiode
$3.050
Vyrian
$3.210
Corphita
$2.889
Parana Technologies
$12.658
$13.122
DigiPath Technology Company
$13.939
$12.823
ChromeModa Solutions
$14.223
$11.663
IDEA Electronic Components Group
$13.512
$12.801
Lixinc
iodParts Technologies Inc.
A-Z Elektronik GmbH
Perfect Parts
Kepictronics
This material provides durability and protection for the internal components of the data bus terminator.
Allows for easy and convenient mounting onto circuit boards, saving space and simplifying the assembly process.
Can handle high voltage inputs, ensuring reliable performance in various electronic systems.
Provides sufficient capacity for processing and terminating multiple data signals effectively.
Can operate in relatively high temperature environments without compromising performance.
Can operate in cold temperature conditions, making it suitable for a wide range of applications.
Ensures reliable electrical connections and corrosion resistance for long-term use.
Compact size allows for installation in tight spaces or crowded PCB layouts.
Can withstand high reflow temperatures during assembly processes without damage.
Suitable for standard commercial applications where temperature fluctuations are within normal operating ranges.
Provides compatibility with systems requiring multiple signal termination points.
Utilizes diode technology for efficient signal termination, ensuring signal integrity and reliability.
Data Bus Terminators SN74S1051PWR attributes and parameters. Explore more Data Bus Terminators devices from Texas Instruments
Differential Output:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Bits:
No. of Functions:
No. of Signal Lines:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
SN74S1051PWR Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
BSS138PS,115
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
General Instrument
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
UCC5672MWPTRG4
UCC5672MWPTRG4 by Texas Instruments is a SCSI bus terminator with 36 terminals, operating at 3.3V and supporting differential output. It features a max supply voltage of 5.25V, BICMOS technology, and operates in commercial temperature grades up to 70°C. Ideal for data bus termination applications requiring high performance in compact spaces.
UCC5614PWP
UCC5614PWP by Texas Instruments is a SCSI bus terminator with 24 terminals, operating voltage range of 2.7V to 5.25V, and BICMOS technology. It features a small outline package style, dual terminal position, and nickel palladium gold finish. Ideal for data bus termination applications in commercial temperature environments.
UCC5630AFQPTR
UCC5630AFQPTR by Texas Instruments is a SCSI bus terminator with 48 terminals, operating voltage range of 2.7V to 5.25V, and BICMOS technology. It features differential output, low profile flatpack package style, and nickel palladium gold terminal finish. Ideal for commercial applications requiring precise data bus termination in compact spaces.
MC34268D
MC34268D by Onsemi is a small outline data bus terminator with 8 terminals. It operates b/w 0-125 °C, supports 4.25V supply voltage, and has a peak reflow temperature of 235°C. Ideal for applications requiring bus terminator support circuits in compact spaces.
UC560DPTR
The Texas Instruments UC560DPTR is a data bus terminator with 8 terminals, operating voltage range of 4-6V, and small outline package. It is used in commercial applications as a bus terminator support circuit for temperature-sensitive systems.
UCC5616J
UCC5616J by Texas Instruments is a SCSI bus terminator with 16 terminals, operating voltage range of 4-5.25V, and pull-up resistance of 110 ohm. It is designed for commercial applications with temperature range of 0-70°C, featuring ceramic-metal package material and through-hole terminal form.
UC5612DPG4
UC5612DPG4 by Texas Instruments is a Data Bus Terminator with 16 terminals, operating at 3.8-5.25V. It features a small outline package style and Gull Wing terminal form, suitable for SCSI bus termination applications in commercial temperature environments up to 70°C.
SN74ACT1073NSR
SN74ACT1073NSR by Texas Instruments is a 16-bit data bus terminator with a supply voltage range of 4.5V to 5.5V, ideal for industrial applications. It features CMOS technology, GULL WING terminals, and a small outline package style for compact designs. With dual terminal position and nickel palladium gold finish, it ensures reliable signal termination in various electronic systems.
DS2105Z+
Maxim Integrated
SCSI BUS TERMINATOR; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
UCC5618N
UCC5618N by Texas Instruments is a SCSI bus terminator with 18 signal lines and 110 ohm pull-up resistance. Operating at 4-5.25V, it has a BICMOS technology and dual terminal position for commercial-grade applications. Its compact rectangular package measures 15.24mm x 31.75mm with through-hole terminals, making it ideal for data bus termination in various electronic devices.
DS2105Z/T&R+C02
Analog Devices
SCSI BUS TERMINATOR;
MC34268DTRKG
MC34268DTRKG by Onsemi is a small outline bus terminator support circuit with 2 terminals. It operates b/w 0-125 °C, with a supply voltage of 4.25V. Ideal for data bus termination applications in various electronic devices.
LP2998MAX/NOPB
LP2998MAX/NOPB by Texas Instruments is a Data Bus Terminator with 2.2-5.5V supply voltage range, -40 to 125°C operating temperature, and automotive-grade quality. It comes in a small outline package with 8 terminals, matte tin finish, and gull wing terminal form. Ideal for interface applications requiring a compact solution with high reliability in harsh environments.
UCC5672PWPR/1
UCC5672PWPR/1 by Texas Instruments is a Data Bus Terminator with 28 terminals, operating at 3.3V nominal voltage and supporting SCSI interface. It features BICMOS technology, differential output, and a max supply voltage of 5.25V. Ideal for commercial applications requiring thin profile components with dual terminal position.
LP2998MRE/NOPB
LP2998MRE/NOPB by Texas Instruments is a small outline, low profile data bus terminator with 8 terminals. It operates b/w -40 to 125 °C and supports supply voltage range of 2.2V to 5.5V. Ideal for automotive applications due to its matte tin finish and gull wing terminal form.
UCC5631AFQP
UCC5631AFQP by Texas Instruments is a Data Bus Terminator with 48 terminals, operating at 3.3V nominal voltage and supporting SCSI interface. It features BICMOS technology, differential output, and 105 ohm pull-up resistance. Ideal for commercial applications requiring low-profile flatpack design with fine pitch terminals.
SN74F1016DWE4
SN74F1016DWE4 by Texas Instruments is a 20-terminal data bus terminator with 16 signal lines. It operates at temperatures from 0 to 70°C, with a nominal voltage of 5V. This small outline package is ideal for diode bus termination arrays in commercial-grade applications.
UC5602DWP
UC5602DWP by Texas Instruments is a Data Bus Terminator with 28 terminals, operating voltage of 4-5.25V, and temperature range of 0-70°C. It features SCSI interface type, GULL WING terminal form, and 110 ohm pull up resistance. Ideal for commercial applications requiring reliable signal line termination in compact spaces.
UCC5519PWPR
UCC5519PWPR by Texas Instruments is a SCSI bus terminator with 28 terminals, operating voltage range of 2.7V to 5.25V, and differential output capability. It features a small outline package style with gull wing terminals and is designed for commercial temperature grade applications.
UCC5680PW24G4
UCC5680PW24G4 by Texas Instruments is a SCSI bus terminator with 24 terminals, operating voltage range of 2.7V to 5.25V, and peak reflow temperature of 260°C. It features a small outline package style suitable for data bus termination applications in commercial-grade environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
SN74F1056D
SN74F1056D by Texas Instruments is an 8-bit data bus terminator with a supply voltage range of 4.75V to 5.25V and operating temperature from 0°C to 70°C. It features a small outline package style, gull wing terminal form, and nickel palladium gold finish, suitable for diode bus termination arrays in commercial-grade applications.
SN74S1051PW
SN74S1051PW by Texas Instruments is a data bus terminator with 12 bits and 16 terminals. It has a small outline, thin profile package style and operates at temperatures b/w 0°C to 70°C. This IC is commonly used for diode bus termination arrays.
SN74S1051DR
SN74S1051DR by Texas Instruments is a 12-bit diode bus termination array with a supply voltage range of 4.75V to 5.25V. It features a small outline package style, gull wing terminal form, and nickel palladium gold finish. This IC is used for data bus termination applications in commercial temperature environments.
SN74S1053DWR
DIODE BUS TERMINATION ARRAY; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
SN74S1053DWRG4
SN74F1016DW
SN74ACT1073DWE4
DIODE BUS TERMINATION ARRAY; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
SN74F1016DWG4
SN74F1016DWR
SN74ACT1071D
DIODE BUS TERMINATION ARRAY; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
SN74ACT1071DR
SN74ACT1073DWR
SN74ACT1073NSRG4
SN74ACT1073DW
SN74ACT1071DG4
SN74ACT1073DWRE4
SN74ACT1071DRE4
SN74ACT1073DWRG4
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved