Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Texas Instruments 5962-01-354-8213 FIFO operates asynchronously at 5V, with a 16x4 organization and memory width of 4. It is designed for commercial applications requiring reliable data storage and retrieval in a rectangular plastic/epoxy package.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Native Components
$1.630
Northwest PG Solutions
$1.793
Parana Technologies
$2.936
$3.436
IDEA Electronic Components Group
$3.299
$2.969
ChromeModa Solutions
$2.705
AZTECH Wire
$6.568
One Stop Electronics
$7.000
Corphita
DigiPath Technology Company
$2.974
PLASTIC/EPOXY provides durability and protection for the internal components of the FIFO, ensuring reliable operation.
The rectangular shape allows for easy integration and placement within existing electronic systems or circuits.
Asynchronous operation allows for independent and flexible data transfer, making the FIFO suitable for a variety of applications.
A nominal supply voltage of 5V ensures compatibility with standard power sources, making the FIFO easy to incorporate into existing systems.
With a maximum operating temperature of 70°C, this FIFO can perform reliably even in demanding environments.
The 16X4 organization allows for efficient data storage and retrieval, making the FIFO suitable for high-speed applications.
TTL technology ensures fast and reliable data transfer, making the FIFO ideal for applications requiring high performance.
A terminal pitch of 2.54mm makes it easy to connect the FIFO to external components or circuits, simplifying the integration process.
FIFO 5962-01-354-8213 attributes and parameters. Explore more FIFO devices from Texas Instruments
JESD-30 Code:
Memory IC Type:
Memory Width:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Sub-Category:
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
5962-01-354-8213 Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.71
SB
8542.32.00.70
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vishay Semiconductors
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
5962-8952305EA
Cypress Semiconductor
FIFOs; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Cycle Time: 100 ns;
SN74ACT7205L-15DV
Texas Instruments
SN74ACT7205L-15DV by Texas Instruments is a FIFO with 8Kx9 organization, 25ns cycle time, and 40MHz clock frequency. Ideal for parallel applications requiring fast data transfer at temperatures b/w 0-70°C.
SN74ACT3622-20PCB
SN74ACT3622-20PCB by Texas Instruments is a FIFO memory IC with 256x36 organization, operating at 20ns cycle time and 50MHz clock frequency. It features a parallel interface, synchronous operation, and 3-state output characteristics. Ideal for applications requiring fast data storage and retrieval in commercial temperature environments.
SN74ACT7204-50N
SN74ACT7204-50N by Texas Instruments is a 4Kx9 FIFO with 36864-bit memory density and 15 MHz clock frequency. It operates asynchronously at 5V, ideal for commercial applications requiring fast data access within a temperature range of 0 to 70°C.
IDT72V273L7-5BCGI8
Integrated Device Technology
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 100; Package Code: LBGA; Package Shape: SQUARE; Additional Features: IT CAN ALSO BE CONFIGURED AS 32K X 9; RETRANSMIT; ASYNCHRONOUS MODE IS ALSO POSSIBLE;
72V255LA10TFG8
Renesas Electronics
The Renesas Electronics 72V255LA10TFG8 FIFO features a cycle time of 10 ns, operating at a max clock frequency of 100 MHz. With an organization of 8KX18 and memory density of 147456 bit, it is ideal for applications requiring fast data processing such as networking equipment and telecommunications devices.
SN74ACT2236-20FN
SN74ACT2236-20FN by Texas Instruments is a 2Kx9 FIFO chip carrier with 20ns cycle time, operating at 5V. It features synchronous operation, 50MHz clock frequency, and 3-STATE output characteristics. Ideal for industrial applications requiring bi-directional FIFO memory with parallel interface.
72V2111L15PFGI
The Renesas Electronics 72V2111L15PFGI FIFO operates synchronously with a cycle time of 15 ns and a clock frequency of up to 66.7 MHz. It features a memory density of 4718592 bit, suitable for industrial applications requiring fast data processing and parallel operation at temperatures ranging from -40 to 85°C.
SN54ALS229AJ
SN54ALS229AJ by Texas Instruments is a 16x5 FIFO with 40ns cycle time, operating at 5V. It features synchronous operation, 3-STATE output characteristics, and a MILITARY temperature grade. Ideal for applications requiring fast data storage and retrieval in harsh environments.
CD74HCT40105M
Rca Solid State
OTHER FIFO; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
7204L15SOGI
The Renesas Electronics 7204L15SOGI is a CMOS technology-based BI-DIRECTIONAL FIFO memory IC with a memory density of 36864 bits. It operates asynchronously with a cycle time of 25 ns and has a max clock frequency of 40 MHz. This FIFO is suitable for industrial applications requiring fast and efficient data storage and retrieval.
SN54ABT3614PCB
SN54ABT3614PCB by Texas Instruments is a FIFO memory IC with 64x36 organization, operating at 50 MHz clock frequency. It features a 20 ns cycle time, synchronous operation, and 3-STATE output characteristics. Ideal for military applications due to its -55 to 125 °C temperature range and low profile flatpack package style.
CD74HC40105EE4
CD74HC40105EE4 by Texas Instruments is a FIFO memory IC with 16x4 organization, 64-bit memory density, and 10 MHz max clock frequency. It operates in synchronous mode with a cycle time of 500 ns, suitable for military-grade applications requiring fast data storage and retrieval.
5962-8986305YA
Defense Logistics Agency
FIFOs; Temperature Grade: MILITARY; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; No. of Functions: 1;
SN74ABT7820-20PN
SN74ABT7820-20PN by Texas Instruments is a FIFO with 512x18 organization, operating at 50 MHz. It features a cycle time of 20 ns and operates in synchronous mode. Ideal for applications requiring fast data transfer and storage in commercial temperature environments.
IDT72801L10TF
IDT72801L10TF FIFO by Integrated Device Technology features a 10 ns cycle time, 256x9 organization, and operates at a max clock frequency of 100 MHz. Ideal for applications requiring fast data storage and retrieval with synchronous operation in commercial temperature grades.
72V275L10TFG8
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE; Minimum Operating Temperature: 0 Cel;
SN74ACT7206L-25DV
SN74ACT7206L-25DV by Texas Instruments is a 16Kx9 FIFO with 35ns cycle time, operating at 5V. It features a max clock frequency of 28.5MHz and offers 3-STATE output characteristics. Ideal for applications requiring fast data transfer and storage in commercial temperature environments.
72V841L10TFG8
BI-DIRECTIONAL FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE; Maximum Operating Temperature: 70 Cel;
SN74ABT7819-30PH
SN74ABT7819-30PH by Texas Instruments is a 512x18 FIFO with a cycle time of 30.03 ns and max clock frequency of 33.3 MHz. It operates synchronously, has a memory density of 9216 bit, and is ideal for commercial applications requiring fast data storage and retrieval.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
Atmel
Temic Semiconductors
FIFOs; Temperature Grade: MILITARY; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; JESD-30 Code: R-GDIP-T28;
Qp Semiconductor
5962-8986305YA by Qp Semiconductor is a FIFO memory with a cycle time of 40 ns. It has an organization of 512X9 and a memory density of 4608 bit. This CMOS technology device operates in an asynchronous mode and is suitable for military applications.
Renesas Electronics 5962-8986305YA FIFO operates at 25 MHz with 512x9 organization. Ideal for military applications, it has a cycle time of 40 ns and can withstand temperatures from -55 to 125 °C.
Teledyne E2v (Uk)
OTHER FIFO; Temperature Grade: MILITARY; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Terminal Pitch: 2.54 mm;
OTHER FIFO; Temperature Grade: MILITARY; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 240;
Matra Mhs
FIFOs; Temperature Grade: MILITARY; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
FIFOs; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
OTHER FIFO; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; No. of Functions: 1;
OTHER FIFO; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Qualification: Not Qualified;
5962-9560801NXD
BI-DIRECTIONAL FIFO; Temperature Grade: MILITARY; No. of Terminals: 120; Package Code: LFQFP; Package Shape: SQUARE; Minimum Operating Temperature: -55 Cel;
5962-9470401QXX
FIFOs; Temperature Grade: MILITARY; No. of Terminals: 84; Package Code: PGA; Package Shape: SQUARE; Technology: BICMOS;
5962-9470401QXA
BI-DIRECTIONAL FIFO; Temperature Grade: MILITARY; No. of Terminals: 84; Package Code: PGA; Package Shape: SQUARE; Qualification: Qualified;
5962-9560801NXX
FIFOs; Temperature Grade: MILITARY; No. of Terminals: 120; Package Code: LFQFP; Package Shape: SQUARE; Terminal Position: QUAD;
5962-01-164-5285
OTHER FIFO; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Power Supplies (V): 5;
5962-01-356-2801
OTHER FIFO; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Nominal Supply Voltage / Vsup (V): 5;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved