Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STMicroelectronics Z0402NF is a TRIAC with 3mA DC Gate Trigger Current, 800V Repetitive Peak Off-state Voltage, and 0.95A Max RMS On-state Current. Ideal for applications requiring precise AC power control in industrial equipment and lighting systems.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Digiode
Huijzer Components
IDEA Electronic Components Group
$4.366
$3.930
MKK Technologies
$8.211
DigiPath Technology Company
Corphita
Parana Technologies
$5.221
The use of plastic/epoxy material provides durability and protection to the internal components of the TRIAC, making it suitable for various industrial applications.
The low gate trigger current ensures efficient switching performance and helps in reducing power consumption.
The single configuration simplifies the installation process and makes the TRIAC easy to integrate into different circuit designs.
With a high maximum operating temperature, this TRIAC can withstand elevated temperatures without compromising performance, ensuring reliability in harsh environments.
The 4 quadrant logic level design allows for bidirectional current control and precise switching, making it ideal for both AC and DC applications.
Triode For Alternating Current (TRIAC) Z0402NF attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from STMicroelectronics
Additional Features:
Configuration:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JESD-30 Code:
JESD-609 Code:
Maximum Leakage Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
Z0402NF Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Sensitron Semiconductor
Goodwork Semiconductor
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
DTB8C
DTB8C by Onsemi is a TRIAC with 1.6V max on-state voltage, 50mA max DC gate trigger current, and 2mA max leakage current. Ideal for AC applications, it has a max RMS on-state current of 8A and repetitive peak off-state voltage of 200V. Operating up to 125 °C, it's suitable for various triggering needs.
2N6073BG
2N6073BG by Onsemi is a TRIAC with max DC gate trigger current of 15mA, RMS on-state current of 4A, and repetitive peak off-state voltage of 400V. It is used in applications requiring a single configuration TRIAC for AC control, such as dimmer switches and motor speed controls.
BTA41-600-BW
Continental Device India
TRIAC;
TIC236D
TIC236D by Texas Instruments is a TRIAC with 12A RMS current, 400V repetitive peak off-state voltage, and 50mA max DC gate trigger current. Ideal for AC power control applications due to its 4-quadrant logic level TRIAC configuration and -40°C to 110°C operating temperature range in a plastic/epoxy package.
TIC263E
TIC263E by Texas Instruments is a TRIAC with 25A RMS on-state current, 50mA max DC gate trigger current, and 500V repetitive peak off-state voltage. It is used in applications requiring precise AC power control such as dimmer switches, motor speed controls, and heating regulation.
MAC997A6RL1G
MAC997A6RL1G by Onsemi is a TRIAC with 400V repetitive peak off-state voltage, 0.8A max RMS on-state current, and 5mA max DC gate trigger current. Ideal for applications requiring precise AC power control in devices like dimmers, motor speed controllers, and heating controls.
TIC216C
TIC216C by Texas Instruments is a TRIAC with 5mA DC Gate Trigger Current, 2mA Leakage Current, and 6A RMS On-state Current. It operates b/w -40 to 110°C, making it suitable for AC power control applications requiring precise triggering and low leakage current.
MAC8SMG
MAC8SMG by Onsemi is a 4-quadrant logic level TRIAC with max. RMS on-state current of 8A and DC gate trigger voltage of 1.5V. Ideal for AC applications, it operates b/w -40 to 110°C, featuring a plastic/epoxy package body and through-hole terminal form.
MAC8DG
MAC8DG by Onsemi is a TRIAC with 8A RMS current, 400V repetitive peak off-state voltage, and 35mA DC gate trigger current. It is used in applications requiring AC switching such as dimmers, motor speed control, and heating control due to its single configuration and through-hole terminal form.
BT136-600D/DG,127
Ween Semiconductors
TRIAC; Surface Mount: NO; Maximum Holding Current: 10 mA; Repetitive Peak Off-state Voltage: 600 V; Maximum DC Gate Trigger Voltage: 1.5 V; Maximum Operating Temperature: 125 Cel;
BTB16H-600BW3G
4 QUADRANT LOGIC LEVEL TRIAC; Terminal Finish: Tin (Sn); JESD-609 Code: e3;
ACST1210-7GTR
ACST1210-7GTR by STMicroelectronics is a TRIAC with 10mA DC gate trigger current, 12A RMS on-state current, and 700V repetitive peak off-state voltage. It is used in applications requiring AC switching such as lighting controls, motor speed control, and heating regulation.
MAC12HCDG
MAC12HCDG by Onsemi is a TRIAC with 12A RMS on-state current, 400V repetitive peak off-state voltage, and 50mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
MAC4DCN
MAC4DCN by Onsemi is a TRIAC with max RMS on-state current of 4A, DC gate trigger voltage of 5V, and repetitive peak off-state voltage of 800V. Ideal for AC power control applications due to its high operating temperature range (-40 to 125 °C) and surface mount capability.
MAC97A4RLRFG
MAC97A4RLRFG by Onsemi is a 4 QUADRANT LOGIC LEVEL TRIAC with max DC Gate Trigger Current of 5mA, RMS On-state Current of 0.6A, and Repetitive Peak Off-state Voltage of 200V. Ideal for AC power control applications due to its high temp range (-40 to 110 °C) and low leakage current (0.1mA).
TIC206A
TIC206A by Texas Instruments is a TRIAC with 3 terminals, max. RMS current of 3A, and DC gate trigger voltage of 2V. It operates b/w -40 to 110°C, ideal for AC power control in applications like dimmers and motor speed controllers.
BTA206X-800CT:127
NXP Semiconductors
NXP Semiconductors' BTA206X-800CT:127 is a TRIAC with 6A RMS on-state current, 800V repetitive peak off-state voltage, and -40 to 150°C operating temperature range. Ideal for AC power control applications requiring a max DC gate trigger current of 35mA.
MAC218A10
MAC218A10 by Onsemi is a TRIAC with 800V repetitive peak off-state voltage, 8A max RMS on-state current, and 2V max on-state voltage. It is used in AC power control applications due to its single configuration, through-hole terminal form, and flange mount package style.
DTM6G
DTM6G by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 6A max RMS on-state current, and -40 to 125 °C operating temperature range. Ideal for AC power control applications requiring precise gate trigger current and voltage specifications.
MAC97A6
MAC97A6 by Onsemi is a TRIAC with 3 terminals, max. DC gate trigger current of 5mA, and max. RMS on-state current of 0.6A. Ideal for applications requiring a 4 quadrant logic level TRIAC like dimmer switches, motor speed control, and AC switching circuits due to its high operating temperature range (-40 °C to 110°C) and low leakage current (0.1mA).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Z0409MF1AA2
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Terminal Form: THROUGH-HOLE;
Z0405NF0AA2
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Maximum RMS On-state Current: 4 A;
Z0405MF1AA2
Z0409MF0AA2
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Minimum Critical Rate of Rise of Off-state Voltage: 100 V/us;
Z0409MF
STMicroelectronics Z0409MF is a TRIAC with 600V repetitive peak off-state voltage, 0.95A max RMS on-state current, and 10mA max DC gate trigger current. Ideal for AC power control in applications like lighting dimmers, motor speed controllers, and heating control systems.
Z0405MF0AA2
Z0405NF1AA2
Z0405NF1AA2 by STMicroelectronics is a TRIAC with 4A RMS on-state current, 800V repetitive peak off-state voltage, and 5mA max DC gate trigger current. It is used in applications requiring precise AC power control such as dimmers, motor speed controllers, and heating control systems.
Z0402SF1AA2
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Maximum DC Gate Trigger Current: 3 mA;
Z0402MH
4 QUADRANT LOGIC LEVEL TRIAC;
Z0405DE1AA2
TRIAC; Surface Mount: NO; Maximum Operating Temperature: 125 Cel; Maximum Holding Current: 10 mA; Maximum DC Gate Trigger Voltage: 2 V; Maximum Leakage Current: .2 mA;
Z0405DF
Z0402SF0AA2
Z0402MF1AA2
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Minimum Critical Rate of Rise of Off-state Voltage: 10 V/us;
Z0405DE
TRIAC; Surface Mount: NO; Terminal Finish: Matte Tin (Sn); Maximum Holding Current: 10 mA; Maximum Leakage Current: .2 mA; Maximum RMS On-state Current: 4 A;
Z0402MB
Z0402DF
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Maximum DC Gate Trigger Voltage: 2 V;
Z0402ME
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Voltage: 2 V; Maximum RMS On-state Current: 4 A; JESD-609 Code: e3; Maximum DC Gate Trigger Current: 3 mA;
Z0402NF0AA2
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Repetitive Peak Off-state Voltage: 800 V;
Z0402MF
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; No. of Elements: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved