Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VND810MSP13TR by STMicroelectronics is a peripheral driver with 10 terminals, operating voltage range of 5.5-36 V, and built-in protections for transient, over current, over voltage. Widely used in automotive applications due to its small outline package style and sink output current flow direction.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Digiode
Advanced Electronics
$3.567
$3.246
$2.925
IDEA Electronic Components Group
$8.964
$8.067
Microchip USA
$15.380
MKK Technologies
$16.855
DigiPath Technology Company
AZTECH Wire
$17.770
Parana Technologies
$10.717
Corphita
Provides durability and protection for the internal components of the peripheral driver, ensuring long-lasting performance.
Offers comprehensive protection against various electrical faults and ensures safety of connected devices and the driver itself.
Ability to operate at high temperatures makes this peripheral driver suitable for applications where heat dissipation is a concern, ensuring reliable performance in challenging environments.
Stable and efficient power supply voltage that is suitable for a wide range of applications, providing consistent performance.
Versatile interface IC type allows for flexible connectivity options and compatibility with various systems, enhancing the usability of the peripheral driver.
Peripheral Drivers VND810MSP13TR attributes and parameters. Explore more Peripheral Drivers devices from STMicroelectronics
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
VND810MSP13TR Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
RC0603JR-070RL
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Solid State Devices
Hy Electronic
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
VN800S-E
STMicroelectronics
STMicroelectronics' VN800S-E is a peripheral driver with 8-36V power supplies, built-in protections, and source output current flow. Its compact rectangular package is ideal for applications requiring transient, over current, over voltage, thermal, and under voltage protection in various electronic systems.
TLE6220GP
Siemens
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Shape: RECTANGULAR; Surface Mount: YES; Qualification: Not Qualified;
VN5T006ASPTR-E
STMicroelectronics' VN5T006ASPTR-E is a peripheral driver with 10 terminals, built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 36V and has a nominal output peak current limit of 115A. Ideal for automotive applications due to AEC-Q100 screening level.
BSP742R
Infineon Technologies
BSP742R by Infineon Technologies is a Peripheral Driver with 8 terminals, MOS technology, and built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at supply voltages of 5-34 V and has a turn-on time of 140 us. Ideal for automotive applications requiring buffer or inverter based peripheral drivers.
BSP75GTA
Zetex Plc
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): 40;
TPS22919DCKT
TPS22919DCKT by Texas Instruments is a peripheral driver with 6 terminals, operating voltage range of 1.6V to 5.5V, and output current limit of 3A. It offers built-in protections against transient events, overcurrent, and thermal issues. Ideal for industrial applications requiring a compact thin profile package with sink flow direction.
VN808-32-E
STMicroelectronics' VN808-32-E is a peripheral driver with 8 functions, operating at supply voltages of 10.5V to 32V. This automotive-grade device offers built-in protections against transient, thermal, and under-voltage issues. With a max output current of 0.5A, it is suitable for various applications requiring source flow direction control in compact spaces.
VNS3NV04D-E
VNS3NV04D-E by STMicroelectronics is a peripheral driver with 2 functions, 8 terminals, and built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 13V to 30V and has a nominal output peak current limit of 5A. This small outline package driver is ideal for applications requiring source and sink output current flow direction.
VND5T016ASPTR-E
VND5T016ASPTR-E by STMicroelectronics is a peripheral driver with 16 terminals, operating voltage range of 8-36 V. AEC-Q100 compliant, it offers built-in protections for transient, over/under voltage & thermal issues. Ideal for automotive applications due to its small outline package and sink output current flow direction.
VN340SP
VN340SP by STMicroelectronics is a 4-function peripheral driver with built-in protections for over current, thermal, and under voltage. It operates at supply voltages ranging from 10V to 24V and can handle a max output current of 0.7A. This small outline driver is ideal for applications requiring source flow direction and quick turn-on/off times.
BTS3800SLHTSA1
BTS3800SLHTSA1 by Infineon Technologies is a peripheral driver with 5 terminals, offering built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 18V and has a turn-on/off time of 5us. This small outline device is ideal for applications requiring source/sink output current flow control.
MAX845ESA+T
Analog Devices
MAX845ESA+T by Analog Devices is a small outline peripheral driver with 8 terminals. It operates b/w -40 to 85°C, with supply voltage range of 4.5-5.5V. Ideal for industrial applications requiring buffer or inverter based interface ICs.
BSP742RXT
BSP742RXT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 13.5 V and has a turn-on time of 140 us. This rectangular package style IC is ideal for buffer or inverter based applications requiring sink output current flow direction.
BTS428L2
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE; Qualification: Not Qualified;
L293B
L293B by STMicroelectronics is a 16-terminal peripheral driver with a max supply voltage of 36V. It features built-in protections for over current and thermal issues, making it ideal for applications requiring a true output polarity and nominal output peak current limit of 2A. The technology used is bipolar with an interface IC type of half bridge based peripheral driver.
UCC23513DWYR
UCC23513DWYR by Texas Instruments is a peripheral driver with built-in transient and under voltage protections. It operates in industrial temperature range (-40 to 115°C) and can handle a max output current of 4.5A. With Schmitt trigger input characteristics, it serves as a buffer or inverter based peripheral driver for various applications.
BTS441RGNTMA1
BTS441RGNTMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 43V and built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 21A and is used as a buffer or inverter based peripheral driver in various applications requiring precise control of high currents.
BTS3035EJXUMA1
BTS3035EJXUMA1 by Infineon is a peripheral driver with 8 terminals, AEC-Q100 screening level, and built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 3V to 5.5V and has a nominal output peak current limit of 5A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
BTS723GWXUMA1
BTS723GWXUMA1 by Infineon is a peripheral driver with 2 functions, operating at supply voltages b/w 7V to 58V. It offers built-in protections against transient, over current, and over voltage conditions. This small outline package is ideal for applications requiring a nominal output peak current limit of 4.2A, such as buffer or inverter-based interface ICs.
MAX4820EUP-T
Maxim Integrated
MAX4820EUP-T by Maxim Integrated is a Peripheral Driver with 8-bit driver, 0.15A output current, and 0.07A peak current limit. It operates at -40 to 85°C and has built-in transient protection. Ideal for industrial applications requiring buffer or inverter-based peripheral drivers.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VND830SPTR-E
VND830SPTR-E by STMicroelectronics is a peripheral driver with 2 functions, 6A max output current, and built-in protections. It operates on power supplies ranging from 8V to 36V and is ideal for buffer or inverter-based interface IC applications requiring source flow direction.
VND830SP-E
VND830SP-E by STMicroelectronics is a 2-function peripheral driver with max supply voltage of 36V. It offers built-in protections against transient, over current, and over voltage. Ideal for applications requiring a source output current flow direction and nominal output peak current limit of 9A.
VND830SP13TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HSOP; Package Shape: RECTANGULAR;
VND830SP
VND810PTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
VND830PTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
VND830ETR-E
VND830ETR-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V. It has built-in protections for transient, over voltage, thermal, and under voltage conditions. This small outline package is commonly used as a buffer or inverter based peripheral driver in various applications.
VND810SPTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HSOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
VND830ASP-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: SOP; Package Shape: RECTANGULAR; Output Current Flow Direction: SINK;
VND810SP-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
VND810PEP
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 12; Package Code: HLSSOP; Package Shape: RECTANGULAR; Power Supplies (V): 8/36;
VND830
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Seated Height: 2.65 mm;
VND810P-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Output Current: 1 A;
VND810TR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage: 5.5 V;
VND810MSP
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: SOP; Package Shape: RECTANGULAR;
VND83013TR
VND81013TR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
VND810PEP-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 12; Package Code: HLSSOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;
VND810MSP-E
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved