Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NPN; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Transistor Element Material: SILICON; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
Median Price
-
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Distrelec
1+ parts
100+ parts
1k+ parts
10k+ parts
Bristol Electronics
Dan-Mar Components
Chip Stock
LWI Electronics Inc
ComSIT Distribution GmbH
R&J Components
Vyrian
Pegasus Components GmbH
Q Components
Cyclops Electronics Ltd
Digiode
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
ComSIT USA
LIBRA Elektronik GmbH
J2 Sourcing AB
North Shore Components
ECAB
Anansix
Nova Conductors
Rebound Electronics
NPI Materials, Inc.
Martec Srl
Prism Electronics
Advanced Electronics
$0.876
$0.832
Corohmni
$0.944
Aztec Data Supply Inc.
$1.646
AZTECH Wire
$4.680
Ampacity Inc.
$56.050
Semicontronic
$60.050
$58.549
$58.248
Perfect Parts
Formix International (Excess)
Infinite Electronics LLP (Excess)
Component Connect
Futuretech Components
Cyclops Electronics Ltd (Excess)
Lixinc
A-Z Elektronik GmbH
Kepictronics
Argo Parts USA
Corphita
S.R.D Solutions
UNI Independent Distributors
Computer Components Inc. - USA
Supply Digital
Continental Prestige Electronics
Bastille Electronics
Assy Fe
Robosynatics
Lucentia Tech
Small Signal Bipolar Junction Transistors (BJT) PDTC114ET attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Philips Semiconductors
Minimum DC Current Gain (hFE):
JESD-609 Code:
No. of Elements:
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Sub-Category:
Surface Mount:
Terminal Finish:
Transistor Element Material:
PDTC114ET Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
In September 2006, Philips completed the sale of an 80.1% stake in Philips Semiconductors to a consortium of private equity investors consisting of KKR, Bain Capital, Silver Lake Partners, Apax Partners and AlpInvest Partners. The new company name NXP (from Next eXPerience) was announced on August 31, 2006, and the company was officially launched during the Internationale Funkausstellung (IFA) consumer electronics show in Berlin. The newly independent NXP was ranked as one of the world's top 10 semiconductor companies
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
1554216002
Molex
WIRE AND CABLE;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
M39029/58-360
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BC847CE6327HTSA1
Infineon Technologies
BC847CE6327HTSA1 by Infineon Technologies is a NPN BJT transistor with hFE of 420. It has Vce of 45V and Ic of 0.1A, suitable for switching applications. This surface mount device comes in a small outline package with Gull Wing terminals, ideal for high-frequency operations up to 250MHz.
BC547BT&A
Continental Device India
BC547BT&A by Continental Device India is a NPN BJT with 3 terminals, hFE of 200, and max IC of 0.1A. Ideal for switching applications, it has a max VCE of 45V and operates up to 150°C. The transistor's package is cylindrical with matte tin finish in a through-hole terminal form.
2N3904
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; Transistor Element Material: SILICON;
BC817-25LT1G
BC817-25LT1G by Onsemi is a NPN BJT with 160 min hFE, 45V VCEO, and 100MHz fT. Ideal for small signal applications in electronics due to its compact SMALL OUTLINE package and high transition frequency. Suitable for surface mount designs requiring low power dissipation and moderate collector current.
2N2219A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 3 W; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-T3;
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
2N2905A
NXP Semiconductors
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Case Connection: COLLECTOR;
JANTX2N2222AUB
Semicoa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N3904TA
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; Minimum DC Current Gain (hFE): 30;
MMBT3906-7-F
Diodes Incorporated
Diodes Inc. MMBT3906-7-F is a PNP BJT transistor with 3 terminals, max power dissipation of 0.3W, and max collector-emitter voltage of 40V. Ideal for switching applications in small outline packages, it operates b/w -55 to 150°C with a transition frequency of 250MHz.
BC847BPN,115
Nexperia
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .1 A; Package Body Material: PLASTIC/EPOXY;
BC817-25QAZ
NPN; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Maximum Operating Temperature: 150 Cel;
BC807-40LT1G
BC807-40LT1G by Onsemi is a PNP BJT transistor for switching applications. Features include VCEsat of 0.7V, hFE of 250, and IC of 0.5A. With a max operating temp of 150°C, it's ideal for small outline packages in high-speed circuits.
MMBT3906T-7-F
Diodes Inc. MMBT3906T-7-F is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance and max operating temp of 150°C. Features GULL WING terminals, RECTANGULAR package shape, and SILICON transistor element material.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; Maximum Turn On Time (ton): 70 ns;
JANTX2N2222AUBT/R
Microchip Technology
JANTX2N2222AUBT/R by Microchip is a NPN BJT transistor for switching applications. It has hFE of 30, Vce of 50V, and Ic of 0.8A. With a turn on time of 35ns and turn off time of 300ns, it's ideal for fast-switching circuits in military-grade electronics per MIL-19500/255 standards.
MMBT2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): 1 A;
2N2222AUA
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; Maximum Collector Current (IC): .8 A; Transistor Element Material: SILICON;
MMBT2907A
National Semiconductor
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): .8 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PDTC114ET,215
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 230 MHz; Maximum Collector Current (IC): .1 A; Package Style (Meter): SMALL OUTLINE;
The NXP Semiconductors PDTC114ET,215 is a NPN BJT transistor with VCEsat of 0.3V and hFE of 30. It is ideal for switching applications, featuring a max IC of 0.1A and operating temperature up to 150°C. The package style is small outline with GULL WING terminals, suitable for surface mount assembly.
PDTC114EU,115
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 230 MHz; Maximum Collector Current (IC): .1 A; Maximum Operating Temperature: 150 Cel;
The NXP Semiconductors PDTC114EU,115 is a NPN BJT transistor with built-in resistor for switching applications. It has a max collector-emitter voltage of 50V, collector current of 0.1A, and power dissipation of 0.2W. This small outline package with gull wing terminals operates up to 150°C, making it suitable for various electronic devices.
PDTC114ET,235
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 230 MHz; Maximum Collector Current (IC): .1 A; Transistor Application: SWITCHING;
NXP Semiconductors' PDTC114ET,235 is a NPN BJT transistor with VCEsat of 0.3V and hFE of 30. Ideal for switching applications, it has a max IC of 0.1A and operates up to 150°C. With a compact Gull Wing package style, it offers high transition frequency at 100MHz.
PDTC114YT,215
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Collector Current (IC): .1 A; Maximum VCEsat: .3 V; Terminal Finish: TIN;
The NXP Semiconductors PDTC114YT,215 is a NPN BJT transistor with built-in resistor for switching applications. It has a low VCEsat of 0.3V and can handle a max collector-emitter voltage of 50V. With a small outline package style, it offers high DC current gain and operates up to 150°C, making it suitable for various electronic circuits.
PDTC114ET-QR
Nexperia's PDTC114ET-QR is a NPN BJT transistor with VCEsat of 0.1V, hFE of 30, and IC of 0.1A. Ideal for switching applications in automotive electronics due to AEC-Q101 standard compliance and built-in resistor configuration. Operates b/w -65°C to 150°C with a max fT of 230MHz.
PDTC114ET-QVL
Nexperia's PDTC114ET-QVL is a NPN BJT with built-in resistor for switching applications. Features include VCEsat of 0.1V, hFE of 30, and fT of 230MHz. With max ratings at 50V, 0.1A, and 150°C, it's ideal for small outline SMT designs in automotive electronics meeting AEC-Q101 standards.
PDTC114ET
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 230 MHz; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .1 A;
The NXP Semiconductors PDTC114ET is a NPN BJT transistor with VCEsat of 0.3V, hFE of 30, and IC of 0.1A. Ideal for switching applications due to its built-in resistor and small outline package style. With a max operating temperature of 150°C, it offers reliable performance in various electronic circuits.
PDTC143ET,215
NXP Semiconductors' PDTC143ET,215 is a NPN BJT with VCEsat of 0.3V and hFE of 30. Ideal for switching applications, it has a max IC of 0.1A and operates up to 150°C. The small outline package features Gull Wing terminals and built-in resistor for easy surface mount installation.
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Collector Current (IC): .1 A; Transistor Application: SWITCHING; Terminal Finish: TIN;
PDTC114EU/S911,115
NXP Semiconductors' PDTC114EU/S911,115 is a NPN BJT transistor with 0.1A max collector current and 0.2W power dissipation. With hFE of 30, it's ideal for low-power applications in surface mount designs.
PDTC123JT,215
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Collector Current (IC): .1 A; Maximum Collector-Base Capacitance: 3.5 pF; JEDEC-95 Code: TO-236AB;
NXP Semiconductors' PDTC123JT,215 is a NPN BJT with VCEsat of 0.3V and hFE of 100. Ideal for switching applications, it has a max IC of 0.1A and operates up to 150°C. The transistor's package is small outline with GULL WING terminals in a RECTANGULAR shape.
PDTC143ZT,215
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Collector Current (IC): .1 A; No. of Terminals: 3; Terminal Position: DUAL;
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .1 A; Package Shape: RECTANGULAR;
PDTC114EEF
Philips Semiconductors
NPN; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .1 A; No. of Elements: 1; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved