Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STK672-732AN-E by Onsemi is a Motion Control IC with 19 terminals, 5V nominal voltage, and 10A max output current. It is a stepper motor controller in rectangular package style for applications requiring precise motion control at voltages b/w 4.75V to 5.25V.
Median Price
$3.970
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Farnell
1+ parts
$1.770
100+ parts
-
1k+ parts
10k+ parts
Arrow
$3.508
Chip1Stop
$4.340
Flip Electronics (Authorized)
Rochester
$3.550
$3.340
DigiKey
$12.000
Digiode
$1.682
Chip Stock
Vyrian
Flip Electronics
Continental Prestige Electronics
$1.580
Corphita
$1.593
Corohmni
Component Stockers USA
$4.040
$5.080
Vigor
$7.990
AZTECH Wire
$10.960
Problanco Electronics
SupplyDigital Components
TANS Electronics
Kulean Microsystems
Authorized Procurement Solutions
UHIMA Technologies
Microchip USA
Perfect Parts
The rectangular package shape allows for easy integration into various design layouts.
Having a nominal supply voltage of 5V ensures compatibility with many standard power sources.
The ample number of terminals provides flexibility in connecting the IC in different configurations.
The flange mount package style enables secure and easy mounting onto a surface.
The matte tin finish offers good solderability and corrosion resistance, ensuring long-term reliability.
The zig-zag terminal position helps in efficient routing of connections and reduces the chances of short circuits.
Being a stepper motor controller, this IC is suitable for applications requiring precise control and positioning of motors.
The minimum supply voltage of 4.75V provides a safe operating range, preventing undervoltage issues.
With a high maximum output current of 10A, this IC can drive demanding loads with ease.
The hybrid technology used in this IC combines the benefits of different technologies, offering a balance of performance and cost-efficiency.
The through-hole terminal form simplifies the assembly process and provides mechanical stability.
Having a maximum supply voltage of 5.25V ensures the IC's protection against overvoltage conditions.
Motion Control ICs STK672-732AN-E attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Shape:
Package Style (Meter):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Position:
STK672-732AN-E Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 7/Apr/2021 STKx obs 13/Jun/2022
PCN Assembly/Origin - STK672 Series Supplier Add 28/Nov/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
Promax-johnton
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
M39029/58-360
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Rugao Dachang Electronic
Tak Cheong Electronics Holdings
L6205PD
STMicroelectronics
STMicroelectronics L6205PD is a Motion Control IC with 48V nominal voltage, 5.6A max output current, and BCDMOS technology. Ideal for automotive applications due to its small outline package and dual terminal position. Supports stepper motor control with a wide operating temperature range from -40°C to 150°C.
FNE41060
FNE41060 by Onsemi is a Motion Control IC with 26 terminals, capable of handling up to 15A output current and operating at a max supply voltage of 400V. This AC Motor Controller utilizes Hybrid technology, features dual terminal position in a rectangular package style for flange mount applications.
DRV8353HRTAT
Texas Instruments
DRV8353HRTAT by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage range of 9-75V, and max output current of 1A. Ideal for automotive applications, it features a temp range of -40 to 125°C and terminal finish of Ni/Pd/Au.
POWERSTEP01TR
POWERSTEP01TR by STMicroelectronics is a Motion Control IC with 89 terminals, operating b/w -25°C to 125°C. It has a nominal voltage of 3.3V and comes in a rectangular chip carrier package style. Ideal for stepper motor control applications due to its compact size (11mm x 14mm) and surface mount capability.
DRV8872DDA
DRV8872DDA by Texas Instruments is a Motion Control IC with 8 terminals, operating voltage range of 6.5V to 12V, and max output current of 3.6A. It is designed for brush DC motor control applications in automotive environments due to its low profile package style and dual terminal position.
MAX14872ETC+T
Maxim Integrated
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
DRV8245SQPWPRQ1
DRV8245SQPWPRQ1 by Texas Instruments is a Motion Control IC with 28 terminals and a supply voltage range of 4.5V to 35V. It features a max output current of 32A, BICMOS technology, and operates in temperatures from -40°C to 125°C. Ideal for half-bridge brush DC motor control applications due to its compact size and high performance capabilities.
DRV8353FHRTAR
DRV8353FHRTAR by Texas Instruments is a Motion Control IC with 40 terminals, operating at -40 to 125 °C. It features a max supply voltage of 100V and output current of 1A, suitable for automotive applications. This chip carrier has a very thin profile and is surface mountable, making it ideal for brushless DC motor control in compact designs.
DRV8320RHRHAR
Texas Instruments DRV8320RHRHAR is a Motion Control IC with 40 terminals, suitable for Brushless DC Motor Controllers. It operates b/w -40 to 125°C, supports supply voltage range of 6-60V, and has a max output current of 1A. The chip carrier package style with very thin profile makes it ideal for automotive applications.
FNA23512A
AC MOTOR CONTROLLER; No. of Terminals: 34; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-XDMA-T34; Maximum Output Current: 70 A;
DRV8703QRHBRQ1
DRV8703QRHBRQ1 by Texas Instruments is a Motion Control IC with 32 terminals, operating at -40 to 125 °C. It features a supply voltage range of 5.5V to 45V and is ideal for automotive applications requiring precise stepper motor control in compact spaces. The chip carrier package with very thin profile makes it suitable for surface mount assembly.
DRV10983QPWPRQ1
Texas Instruments' DRV10983QPWPRQ1 is a Motion Control IC with 24 terminals, suitable for Brushless DC Motor control. It operates b/w -40 to 125°C, with Vsup ranging from 6.2V to 28V. The package style is small outline, heat sink/slug, and thin profile for automotive applications.
DRV8702DQRHBTQ1
DRV8702DQRHBTQ1 by Texas Instruments is a Motion Control IC with 32 terminals, operating at -40 to 125°C. It supports supply voltage range of 5.5-45V and features a compact square chip carrier package suitable for automotive applications. With surface mount capability and nickel/palladium/gold terminal finish, it's ideal for brush DC motor control in tight spaces.
TMC2300-LA-T
Trinamic Motion Control & Kg
STEPPER MOTOR CONTROLLER; No. of Terminals: 30; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Minimum Operating Temperature: -40 Cel;
FAM65V05DF1
FAM65V05DF1 by Onsemi is a Motion Control IC with 27 terminals and a max output current of 150A. It operates at a nominal voltage of 450V, with a max supply voltage of 500V. This AC motor controller in rectangular package style (FLANGE MOUNT) is ideal for high-power motion control applications.
DRV8320RSRHAR
Texas Instruments DRV8320RSRHAR is a Motion Control IC with 40 terminals, operating voltage range of 6-60V. Ideal for automotive applications, it offers max output current of 1A and temp range of -40 to 125°C. Package style: CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE.
DRV8833PWPR
DRV8833PWPR by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage of 2.7-10.8V, and max output current of 2A. Ideal for brush DC motor control applications due to its compact size, industrial temperature grade, and surface-mount package design.
PSS35S92F6-AG
Mitsubishi Electric
Mitsubishi Electric's PSS35S92F6-AG is a Motion Control IC with 24 terminals in RECTANGULAR package. It features AC MOTOR CONTROLLER type, 6mm max seated height, and 38x24 mm dimensions. Ideal for applications requiring precise motor control in compact spaces.
TLE62086GXUMA2
Infineon Technologies
TLE62086GXUMA2 by Infineon is a Motion Control IC with 28 terminals, operating at 5V. It is a Brush DC Motor Controller with a max output current of 2A. This small outline package IC is ideal for motion control applications requiring precise voltage regulation and high current output.
DRV8313PWP
DRV8313PWP by Texas Instruments is a motion control IC with a nominal voltage of 24V and power supplies ranging from 8V to 60V. This small outline, heat sink package is ideal for brushless DC motor controllers, offering a max output current of 3A and operating temperatures b/w -40°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
STK681-332-E
Sanyo Semiconductor
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 19; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-XZFM-T19; Maximum Supply Voltage (Vsup): 5.25 V;
Sanyo Electric
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 19; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Package Body Material: UNSPECIFIED;
STK681-332-E by Onsemi is a Motion Control IC with 5V nominal voltage, 12A max output current, and 19 terminals in FLANGE MOUNT package. Ideal for BRUSH DC MOTOR CONTROL applications due to its HYBRID technology and 4.75-5.25V operating range.
STK672-432AN-E
STK672-432AN-E by Onsemi is a Motion Control IC with 19 terminals, 5V nominal voltage, and 10A max output current. It is a stepper motor controller in rectangular package style for applications requiring precise motion control.
STK682-010-E
STEPPER MOTOR CONTROLLER; No. of Terminals: 19; Package Code: HSZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Length: 29.2 mm;
STK672-630CN-E
STEPPER MOTOR CONTROLLER; No. of Terminals: 19; Package Code: HSZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Supply Voltage (Vsup): 5 V;
STK672-740AN-E
STEPPER MOTOR CONTROLLER; No. of Terminals: 19; Package Code: HSZIP; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
STK625-738-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 21; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
STK621-140B-E
Motion Control Electronics; No. of Terminals: 19; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): IN-LINE;
STK650-410
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: DFM; Package Shape: RECTANGULAR; Surface Mount: NO;
STK650-430
STK625-728-E
Motion Control Electronics; No. of Terminals: 21; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Technology: HYBRID;
STK621-070
BRUSHLESS DC MOTOR CONTROLLER; No. of Terminals: 18; Package Code: SFM; Package Shape: RECTANGULAR; Surface Mount: NO; Technology: HYBRID;
STK650-310
STK621-047A-E
STK621-047A-E by Onsemi is a Motion Control IC with 15V supply voltage, 18 terminals, and hybrid technology. It operates b/w -20°C to 100°C and has a max supply current of 4mA. Ideal for applications requiring precise motion control in various electronic devices.
STK621-033N-E
BRUSHLESS DC MOTOR CONTROLLER; No. of Terminals: 19; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE;
STK621-060
BRUSHLESS DC MOTOR CONTROLLER; No. of Terminals: 18; Package Code: SFM; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): FLANGE MOUNT;
STK621-400
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 26; Package Code: DFM; Package Shape: RECTANGULAR; Surface Mount: NO;
STK621-711-E
STK621-061A-E
Motion Control Electronics; No. of Terminals: 18; Surface Mount: NO; Nominal Supply Voltage (Vsup): 15 V; Package Body Material: PLASTIC/EPOXY; Terminal Position: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved