Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STK625-728-E by Onsemi is a Motion Control IC with 15V supply voltage, 21 terminals, and 4mA max supply current. It features hybrid technology in a rectangular plastic/epoxy package, ideal for motion control applications requiring precise power supplies and terminal pitch of 1.27mm.
Median Price
$22.830
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$19.700
1k+ parts
$17.630
10k+ parts
$16.590
DigiKey
Verical
$24.625
$22.038
$20.738
Vyrian
$19.350
Digiode
$20.852
Corohmni
Corphita
$19.755
Vigor
$21.070
SupplyDigital Components
Kulean Microsystems
Continental Prestige Electronics
Kepictronics
TANS Electronics
Problanco Electronics
Microchip USA
UHIMA Technologies
Plastic/Epoxy material provides good insulation and protection for the internal components, making the product durable and reliable.
The 15V supply voltage allows for efficient operation of the Motion Control ICs, providing stable power for consistent performance.
Tin/Nickel terminal finish ensures good conductivity and corrosion resistance, enhancing the overall lifespan and reliability of the product.
With a maximum supply current of 4 mA, the Motion Control ICs consume low power, making them energy-efficient and cost-effective for various applications.
Hybrid technology combines the benefits of different technologies, offering a balance between performance, efficiency, and cost-effectiveness in the product.
Motion Control ICs STK625-728-E attributes and parameters. Explore more Motion Control ICs devices from Onsemi
JESD-30 Code:
JESD-609 Code:
No. of Terminals:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Maximum Supply Current (Isup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
STK625-728-E Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
Infinex
World Products
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
Taiwan Semiconductor
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
IR3101
International Rectifier
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 9; Package Code: SIP; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): IN-LINE;
LB11867RV-TLM-H
LB11867RV-TLM-H by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 5.5-16V, and max output current of 0.02A. Ideal for Brushless DC Motor control applications, it features a small outline package with low profile design and operates b/w -30 to 95°C temperature range.
FSB50450AT
Fairchild Semiconductor
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Length: 29 mm;
A4964KEVTR-J
Allegro MicroSystems
Allegro MicroSystems' A4964KEVTR-J is a Motion Control IC with 36 terminals, suitable for automotive applications. It operates b/w -40 to 150°C, supporting supply voltages from 5.5V to 50V. This brushless DC motor controller in a square package shape is surface mountable and has a very thin profile.
DRV8323RSRGZT
Texas Instruments
DRV8323RSRGZT by Texas Instruments is a Motion Control IC with 48 terminals, suitable for Brushless DC Motor control. It operates b/w -40 to 125°C, supports supply voltages from 6V to 60V, and has a max output current of 1A. The package style is chip carrier with very thin profile, making it ideal for automotive applications.
SA12
Cirrus Logic
BRUSH DC MOTOR CONTROLLER; Temperature Grade: MILITARY; No. of Terminals: 12; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
DRV8256EPWPR
DRV8256EPWPR by Texas Instruments is a Motion Control IC with 28 terminals, suitable for BRUSH DC MOTOR CONTROL applications. It operates b/w -40 to 125°C, supports a supply voltage range of 4.5-48V, and can handle output currents up to 5A.
A5976GLPTR-T
Allegro MicroSystems' A5976GLPTR-T is a Motion Control IC with 28 terminals, operating temperature range of -40 to 105°C. It is a Stepper Motor Controller with max output current of 2.8A, suitable for industrial applications requiring precise motion control in compact spaces.
MC33GD3000EP
MC33GD3000EP by NXP Semiconductors is a Motion Control IC with 8/40V power supplies, 56 terminals, and -40 to 125°C operating temperature range. It's a Brushless DC Motor Controller suitable for automotive applications due to its NO LEAD terminal form and 0.5mm pitch.
FSBB20CH60D
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
DRV8256PRGER
DRV8256PRGER by Texas Instruments is a Motion Control IC with 24V nominal voltage, 5A max output current, and 48V max supply voltage. It is ideal for automotive applications requiring precise control of brush DC motors in a compact chip carrier package.
PDRV8876PWPR
PDRV8876PWPR by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 4.5V to 37V, and temp range of -40°C to 125°C. Ideal for automotive applications due to its small outline package and brush DC motor controller type.
DRV8256PPWPR
DRV8256PPWPR by Texas Instruments is a Motion Control IC with 28 terminals and a supply voltage range of 4.5V to 48V. It features a max output current of 5A, suitable for automotive applications requiring precise brush DC motor control. With a compact rectangular package design and dual terminal position, it operates in temperatures ranging from -40°C to 125°C.
MAX22205ATU+
Analog Devices
MAX22205ATU+ by Analog Devices is a Motion Control IC with 38 terminals, operating from -40 to 125°C. It supports supply voltage range of 4.5V to 65V and peak reflow temp of 260°C. Ideal for BRUSH DC MOTOR CONTROL applications due to its compact size and high temperature tolerance.
MC33926PNB
Freescale Semiconductor
BRUSH DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HQCCN; Package Shape: SQUARE; Surface Mount: YES;
FNB33060T
FNB33060T by Onsemi is a Motion Control IC with 27 terminals, operating temperature range of -40 to 125°C. It supports a max output current of 60A and nominal voltage up to 300V. Ideal for automotive applications as an AC motor controller due to its hybrid technology and flange mount package style.
DRV8305NQPHPRQ1
Texas Instruments' DRV8305NQPHPRQ1 is a Motion Control IC with 48 terminals in a square package. It operates b/w -40 to 125°C, suitable for automotive applications. With a max output current of 1A and support for brushless DC motor control, it's ideal for compact designs requiring precise motion control.
DRV8256ERGER
DRV8256ERGER by Texas Instruments is a Motion Control IC with 24V nominal voltage, 5A max output current, and 48V max supply voltage. It is ideal for automotive applications due to its nickel palladium gold terminal finish and -40 to 125°C operating temperature range. The chip carrier package style with a very thin profile makes it suitable for compact designs requiring precise brush DC motor control.
DRV8801QRTYRQ1
DRV8801QRTYRQ1 by Texas Instruments is a Motion Control IC with a supply voltage range of 8-38V and max output current of 2.8A. This NMOS technology chip carrier is suitable for automotive applications, featuring a wide operating temperature range from -40 to 125°C. With surface mount capability and quad terminals, it offers precise control for brush DC motor controllers.
STGIB10CH60TS-L
STMicroelectronics
STGIB10CH60TS-L by STMicroelectronics is a Motion Control IC with 26 terminals, operating voltage range of 13.5V to 18V, and temp range of -40°C to 125°C. It's designed for AC motor control applications in automotive systems due to its compact rectangular package style and matte tin terminal finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
STK681-332-E
Sanyo Semiconductor
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 19; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-XZFM-T19; Maximum Supply Voltage (Vsup): 5.25 V;
Sanyo Electric
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 19; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Package Body Material: UNSPECIFIED;
STK681-332-E by Onsemi is a Motion Control IC with 5V nominal voltage, 12A max output current, and 19 terminals in FLANGE MOUNT package. Ideal for BRUSH DC MOTOR CONTROL applications due to its HYBRID technology and 4.75-5.25V operating range.
STK672-432AN-E
STK672-432AN-E by Onsemi is a Motion Control IC with 19 terminals, 5V nominal voltage, and 10A max output current. It is a stepper motor controller in rectangular package style for applications requiring precise motion control.
STK682-010-E
STEPPER MOTOR CONTROLLER; No. of Terminals: 19; Package Code: HSZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Length: 29.2 mm;
STK672-630CN-E
STEPPER MOTOR CONTROLLER; No. of Terminals: 19; Package Code: HSZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Supply Voltage (Vsup): 5 V;
STK672-740AN-E
STEPPER MOTOR CONTROLLER; No. of Terminals: 19; Package Code: HSZIP; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
STK625-738-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 21; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
STK621-140B-E
Motion Control Electronics; No. of Terminals: 19; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): IN-LINE;
STK650-410
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: DFM; Package Shape: RECTANGULAR; Surface Mount: NO;
STK650-430
STK621-070
BRUSHLESS DC MOTOR CONTROLLER; No. of Terminals: 18; Package Code: SFM; Package Shape: RECTANGULAR; Surface Mount: NO; Technology: HYBRID;
STK650-310
STK621-047A-E
STK621-047A-E by Onsemi is a Motion Control IC with 15V supply voltage, 18 terminals, and hybrid technology. It operates b/w -20°C to 100°C and has a max supply current of 4mA. Ideal for applications requiring precise motion control in various electronic devices.
STK621-033N-E
BRUSHLESS DC MOTOR CONTROLLER; No. of Terminals: 19; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE;
STK621-060
BRUSHLESS DC MOTOR CONTROLLER; No. of Terminals: 18; Package Code: SFM; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): FLANGE MOUNT;
STK621-400
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 26; Package Code: DFM; Package Shape: RECTANGULAR; Surface Mount: NO;
STK621-711-E
STK621-061A-E
Motion Control Electronics; No. of Terminals: 18; Surface Mount: NO; Nominal Supply Voltage (Vsup): 15 V; Package Body Material: PLASTIC/EPOXY; Terminal Position: SINGLE;
STK625-728-E
Motion Control Electronics; No. of Terminals: 21; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: ZIG-ZAG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved