Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STK621-047A-E by Onsemi is a Motion Control IC with 15V supply voltage, 18 terminals, and hybrid technology. It operates b/w -20°C to 100°C and has a max supply current of 4mA. Ideal for applications requiring precise motion control in various electronic devices.
Median Price
$31.984
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Rochester
$28.430
$25.440
$23.940
Verical
$35.538
$31.800
$29.925
Digiode
$30.086
Vyrian
$31.670
Chip Stock
Corphita
$28.503
Vigor
$30.400
Corohmni
Problanco Electronics
Kulean Microsystems
Microchip USA
TANS Electronics
Continental Prestige Electronics
SupplyDigital Components
UHIMA Technologies
PLASTIC/EPOXY material provides durability and protection for the internal components of the Motion Control IC, ensuring a longer lifespan.
Operating at a nominal supply voltage of 15V allows for efficient power consumption and optimal performance of the Motion Control IC.
Having 15 power supplies provides the necessary power sources for different functions and components within the Motion Control IC, enhancing its versatility.
With 18 terminals, the Motion Control IC offers ample connectivity options for external devices and sensors, making it a versatile choice for various applications.
The high maximum operating temperature of 100°C allows the Motion Control IC to withstand elevated temperatures without compromising its performance or longevity.
The low minimum operating temperature of -20°C ensures that the Motion Control IC can function effectively even in cold environments.
The Tin/Nickel terminal finish provides excellent conductivity and corrosion resistance, maintaining a strong connection between the Motion Control IC and external components.
Having a single terminal position simplifies the installation and connection process of the Motion Control IC, making it user-friendly and easy to integrate into existing systems.
The maximum supply current of 4mA ensures efficient power consumption and prevents overloading, contributing to the overall stability and reliability of the Motion Control IC.
The hybrid technology utilized in the Motion Control IC combines the advantages of different technologies, resulting in improved performance, functionality, and efficiency.
The 2.54mm terminal pitch provides sufficient spacing between terminals for easy connections and reduces the risk of short circuits, enhancing the overall safety and reliability of the Motion Control IC.
Motion Control ICs STK621-047A-E attributes and parameters. Explore more Motion Control ICs devices from Onsemi
JESD-609 Code:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
Qualification:
Sub-Category:
Maximum Supply Current (Isup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Pitch:
Terminal Position:
STK621-047A-E Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Sprague
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
FDMF4061
The Onsemi FDMF4061 is a Motion Control IC with 30V Vsup, 25A output current, and -40 to 125°C operating temperature range. Ideal for automotive applications, this IC features a rectangular package shape, matte tin terminals, and quad terminal position.
TLE52062GAUMA1
Infineon Technologies
Infineon's TLE52062GAUMA1 is a BCDMOS Motion Control IC for brush DC motors. It operates at 6-40V with 6A output current, in a small outline package measuring 10x9.25mm. Suitable for various motion control applications requiring precise voltage regulation and high current handling capabilities.
A4964KEVTR-J
Allegro MicroSystems
Allegro MicroSystems' A4964KEVTR-J is a Motion Control IC with 36 terminals, suitable for automotive applications. It operates b/w -40 to 150°C, supporting supply voltages from 5.5V to 50V. This brushless DC motor controller in a square package shape is surface mountable and has a very thin profile.
A3950SEUTR-T
Allegro MicroSystems' A3950SEUTR-T is a Motion Control IC with 8-36V power supplies, 2.8A output current, and -20 to 85°C operating temperature range. Ideal for Brushless DC Motor control applications due to its compact square package and quad terminal position.
LB11660FV-TLM-E
LB11660FV-TLM-E by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 4-15V, and output current up to 1.5A. Ideal for Brushless DC Motor control applications, it features a compact rectangular package with low profile design and operates b/w -30 to 90°C temperature range.
IRSM836-025MA
International Rectifier
AC MOTOR CONTROLLER; No. of Terminals: 36; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES; Maximum Supply Current (Isup): 10 mA;
L297D
STMicroelectronics L297D is a Motion Control IC with 20 terminals, operating at 5V. It is a Stepper Motor Controller in a small outline package, suitable for applications requiring precise motion control. With bipolar technology and Gull Wing terminals, it offers reliable performance at supply voltages ranging from 4.75V to 7V.
DRV8350RHRGZR
Texas Instruments
DRV8350RHRGZR by Texas Instruments is a Motion Control IC with 48 terminals, operating voltage range of 9-75V, and max output current of 1A. Ideal for automotive applications, it features a temp range of -40 to 125°C and terminal finish of Ni/Pd/Au/Ag.
DRV8873HPWPR
DRV8873HPWPR by Texas Instruments is a motion control IC with 24 terminals and a supply voltage range of 4.5V to 38V. It features a small outline package, suitable for automotive applications, with an operating temperature range from -40°C to 125°C. This IC is designed for brush DC motor control in various electronic systems.
PMCF8316A1VRGFR
PMCF8316A1VRGFR by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage range of 4.5V to 35V, and max output current of 8A. Ideal for Brushless DC Motor control applications due to its compact chip carrier package and wide temperature range (-40°C to 125°C).
A3959SLBTR-T
Allegro MicroSystems' A3959SLBTR-T is a Motion Control IC with 24 terminals, 5V supply voltage, and 6A output current. Ideal for stepper motor control applications, this NMOS technology-based IC operates b/w -20°C to 85°C temperature range in a small outline package.
NFVA23512NP2T
NFVA23512NP2T by Onsemi is a Motion Control IC with 600V Vsup, 70A max output current, and -40 to 125°C operating temp range. Ideal for AC motor control in automotive applications due to its hybrid technology and 34 terminals in a rectangular package.
LV8728MR-AH
LV8728MR-AH by Onsemi is a Motion Control IC with 30 terminals, operating voltage range of 9-32V. It offers 2A output current, suitable for Stepper Motor control applications. With compact dimensions (15.2mm x 7.9mm x 2.45mm), it can operate in temperatures from -30°C to 85°C efficiently.
L6480H
STMicroelectronics L6480H is a Motion Control IC with 38 terminals, operating at power supplies of 7.5V and 48V. It features a small outline package shape for stepper motor control applications, with surface mount capability and peak reflow temperature of 260°C.
DRV8833PWP
DRV8833PWP by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage of 2.7-10.8V, and max output current of 2A. Ideal for brush DC motor control applications, it has a temp range of -40 to 85°C and compact rectangular package style.
TMC262-LA
Microchip Technology
TMC262-LA by Microchip is a Motion Control IC with 32 terminals, suitable for automotive applications. It operates b/w -40 to 125°C and supports a supply voltage range of 9-59V. This IC is designed for stepper motor control, featuring a compact square package shape ideal for surface mount assembly.
BA6845FSE2
ROHM
ROHM's BA6845FSE2 is a motion control IC with 1 function. It operates at a nominal voltage of 5V and has a max output current of 1A. This IC, with its small outline package and low profile, is suitable for brush DC motor control applications.
LV8080LP-TE-L-E
LV8080LP-TE-L-E by Onsemi is a Motion Control IC in PLASTIC/EPOXY package with 16 terminals. Operates at -30 to 85 °C, BICMOS tech, and Vsup of 3V. Ideal for motion control applications requiring precise voltage regulation and compact design.
HIP4020IBZT
Renesas Electronics
Renesas Electronics' HIP4020IBZT is a motion control IC with 20 terminals, operating voltage range of 2.5V to 15V, and output current up to 0.5A. Ideal for stepper motor control applications, it features a small outline package with dimensions of 12.8mm x 7.5mm x 2.65mm and can operate in temperatures ranging from -40°C to 85°C.
FSBB15CH120D
FSBB15CH120D by Onsemi is a motion control IC with a nominal voltage of 600V and max output current of 30A. It is an AC motor controller suitable for automotive applications, with a temperature range from -40 to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
STK681-332-E
Sanyo Semiconductor
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 19; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-XZFM-T19; Maximum Supply Voltage (Vsup): 5.25 V;
Sanyo Electric
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 19; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Package Body Material: UNSPECIFIED;
STK681-332-E by Onsemi is a Motion Control IC with 5V nominal voltage, 12A max output current, and 19 terminals in FLANGE MOUNT package. Ideal for BRUSH DC MOTOR CONTROL applications due to its HYBRID technology and 4.75-5.25V operating range.
STK672-432AN-E
STK672-432AN-E by Onsemi is a Motion Control IC with 19 terminals, 5V nominal voltage, and 10A max output current. It is a stepper motor controller in rectangular package style for applications requiring precise motion control.
STK682-010-E
STEPPER MOTOR CONTROLLER; No. of Terminals: 19; Package Code: HSZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Length: 29.2 mm;
STK672-630CN-E
STEPPER MOTOR CONTROLLER; No. of Terminals: 19; Package Code: HSZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Supply Voltage (Vsup): 5 V;
STK672-740AN-E
STEPPER MOTOR CONTROLLER; No. of Terminals: 19; Package Code: HSZIP; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
STK625-738-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 21; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
STK621-140B-E
Motion Control Electronics; No. of Terminals: 19; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): IN-LINE;
STK650-410
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: DFM; Package Shape: RECTANGULAR; Surface Mount: NO;
STK650-430
STK625-728-E
Motion Control Electronics; No. of Terminals: 21; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Technology: HYBRID;
STK621-070
BRUSHLESS DC MOTOR CONTROLLER; No. of Terminals: 18; Package Code: SFM; Package Shape: RECTANGULAR; Surface Mount: NO; Technology: HYBRID;
STK650-310
STK621-033N-E
BRUSHLESS DC MOTOR CONTROLLER; No. of Terminals: 19; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE;
STK621-060
BRUSHLESS DC MOTOR CONTROLLER; No. of Terminals: 18; Package Code: SFM; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): FLANGE MOUNT;
STK621-400
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 26; Package Code: DFM; Package Shape: RECTANGULAR; Surface Mount: NO;
STK621-711-E
STK621-061A-E
Motion Control Electronics; No. of Terminals: 18; Surface Mount: NO; Nominal Supply Voltage (Vsup): 15 V; Package Body Material: PLASTIC/EPOXY; Terminal Position: SINGLE;
STK621-047A-E
Motion Control Electronics; No. of Terminals: 18; Surface Mount: NO; Package Body Material: PLASTIC/EPOXY; Nominal Supply Voltage (Vsup): 15 V; Qualification: Not Qualified;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved