Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BRUSHLESS DC MOTOR CONTROLLER;
Median Price
$7.570
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Monolithic Power Systems
1+ parts
100+ parts
$5.660
1k+ parts
-
10k+ parts
Nova Conductors
$4.988
Vyrian
Sensible Micro Corp
Continental Prestige Electronics
$4.888
Netroflash
Aztec Data Supply Inc.
$5.900
Semicontronic
$6.430
$6.269
$6.237
Ampacity Inc.
Advanced Electronics
$8.460
$8.037
Corohmni
$16.960
Argo Parts USA
Authorized Procurement Solutions
Motion Control ICs MP6540HGU-A-Z attributes and parameters. Explore more Motion Control ICs devices from Monolithic Power Systems
Other IC type:
MP6540HGU-A-Z Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
It started with a vision. Michael Hsing, pioneering engineer and CEO, founded Monolithic Power Systems, Inc. in 1997 with the belief that an entire power system could be integrated onto a single chip. Under his leadership, MPS has succeeded not only in developing a monolithic power module that truly integrates an entire power system in a single package, but also it continues to defy industry expectations with its patented groundbreaking technologies. We make power design fun! With our innovative proprietary technology processes, we thrive on re-imagining and re-defining the possibilities of high-performance power solutions in industrial applications, telecom infrastructures, cloud computing, automotive, and consumer applications. We are creative thinkers. We break boundaries. We take technology to new levels. As a leading international semiconductor company, Monolithic Power Systems (MPS) creates cutting-edge solutions to improve the quality of life with green, easy-to-use products.
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
Diotec Semiconductor Ag
1552200253
Molex
WIRE AND CABLE;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
Hy Electronic
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
Crimson Semiconductor
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
TC647BEOA
Microchip Technology
Microchip TC647BEOA is a Motion Control IC with 8 terminals, operating voltage of 3.3-5V, and temp range -40 to 85°C. Ideal for Brushless DC Motor control applications due to small outline package and industrial temperature grade suitability. Features matte tin finish, gull wing terminals, and moisture sensitivity level of 3.
L6472PD
L6472PD by STMicroelectronics is a Motion Control IC with 36V nominal voltage, 7A max output current, and 3.6mm seated height. Ideal for stepper motor control applications due to its small outline package and dual terminal position. Suitable for surface mount designs with a rectangular shape and matte tin finish terminals.
A4970SLBTR-T
Allegro MicroSystems' A4970SLBTR-T is a Motion Control IC with 24 terminals, operating voltage of 5.45V, and output current up to 1A. Ideal for Brushless DC Motor Controllers, it has a small outline package style and operates b/w -20°C to 85°C temperature range.
DRV8343SPHPRQ1
Texas Instruments
DRV8343SPHPRQ1 by Texas Instruments is a Motion Control IC with 48 terminals, operating voltage range of 5.5V to 24V, and max output current of 1A. Ideal for automotive applications, this IC features a compact square package design suitable for brushless DC motor control systems.
MP6540HGU-Z
DRV8320RSRHAT
Texas Instruments DRV8320RSRHAT is a Motion Control IC with 40 terminals, operating voltage range of 6-60V. Ideal for automotive applications, it offers max output current of 1A, temp range -40 to 125°C, and compact square package design.
BD63150AFM-E2
ROHM
ROHM's BD63150AFM-E2 is a motion control IC with a max output current of 6A. It operates at a nominal voltage of 24V and has a small outline package style. This IC is suitable for brush DC motor control applications.
MAX6650EUB+
Maxim Integrated
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
L6506D
L6506D by STMicroelectronics is a Motion Control IC with 20 terminals, operating voltage of 5V, and small outline package. Ideal for stepper motor control applications, it has a temperature range of 0-70°C and uses bipolar technology. With surface mount capability and compact dimensions (12.8mm x 7.5mm x 2.65mm), it offers precise motion control in various commercial settings.
TB67S269FTG
Toshiba
Toshiba's TB67S269FTG is a Motion Control IC with 48 terminals, operating voltage of 4.75-5.25V, and max output current of 2A. Ideal for stepper motor control applications due to BCDMOS technology, quad terminal position, and compact square chip carrier package design.
TB6560AFG(O,8)
Toshiba's TB6560AFG(O,8) is a Motion Control IC with 64 terminals and BCDMOS technology. It operates at 4.5-5.5V, outputting up to 2.5A current. Ideal for stepper motor control applications due to its compact size and low power consumption.
TDA1085C
Zarlink Semiconductor
UNIVERSAL MOTOR CONTROLLER; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Package Body Material: PLASTIC/EPOXY;
E-L6219DSATR
STMicroelectronics E-L6219DSATR is a Motion Control IC with 24 terminals, operating voltage of 5V, and max output current of 1A. Ideal for automotive applications, it features bipolar technology and supports stepper motor control with a temp range from -40 to 125°C.
LB11660FV-TLM-E
LB11660FV-TLM-E by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 4-15V, and output current up to 1.5A. Ideal for Brushless DC Motor control applications, it features a compact rectangular package with low profile design and operates b/w -30 to 90°C temperature range.
PDRV8210DRLR
PDRV8210DRLR by Texas Instruments is a motion control IC with 6 terminals, operating voltage range of 1.65V to 11V, and max output current of 1.76A. Ideal for automotive applications due to its small outline package style and wide temperature range (-40°C to 125°C). Suitable for brush DC motor control in compact designs.
DRV8243SQRXYRQ1
Texas Instruments' DRV8243SQRXYRQ1 is a Motion Control IC with 14 terminals and 12A max output current. Operating from -40 to 125°C, it supports supply voltages from 4.5V to 35V. Ideal for Brush DC Motor Controllers in automotive applications due to AEC-Q100 screening and compact chip carrier package.
DRV8436RGER
DRV8436RGER by Texas Instruments is a Motion Control IC with 24 V nominal voltage, suitable for automotive applications. It features a max output current of 0.01 A and operates in a temperature range from -40 to 125 °C. This IC is designed as a stepper motor controller with surface mount packaging and quad terminal position.
PDRV8245SPWPQ1
PDRV8245SPWPQ1 by Texas Instruments is a Motion Control IC with AEC-Q100 screening. It operates b/w -40 to 125 °C, supporting a Vsup range of 4.5V to 35V and delivering up to 32A output current. Ideal for automotive applications due to its robust design and high performance in controlling half bridge brush DC motors.
PMCT8316Z0TRGFR
PMCT8316Z0TRGFR by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage range of 4.5V to 35V, and max output current of 8A. Ideal for automotive applications due to its temperature grade and brushless DC motor controller type. Package style includes chip carrier, heat sink/slug, and very thin profile design.
MAX6650EUB-T
MAX6650EUB-T by Maxim Integrated is a Motion Control IC with 10 terminals, operating at -40 to 85 °C. It has a supply voltage range of 3-5 V and output current of 0.1 A. Ideal for industrial applications requiring brushless DC motor control in a compact square package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MP6540HGU
MP6513GJ-Z
MP6513GJ-Z by Monolithic Power Systems is a Motion Control IC with 6 terminals, operating voltage range of 2.5V to 21V, and temperature range from -40°C to 125°C. It is designed for stepper motor control applications in automotive systems due to its small outline package and surface-mount capability.
MP6550GG-Z
BRUSH DC MOTOR CONTROLLER;
MP6540AGU-Z
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 26; Package Code: VQCCN; Package Shape: SQUARE; Surface Mount: YES;
MP6540GU-Z
MP6513LGJ-Z
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MP6534GU-Z
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
MP6534GU-Z-CUT
MP6507GQ-Z
STEPPER MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
MP6538GV-Z
MP6538GV-Z by Monolithic Power Systems is a Motion Control IC with 28 terminals, operating voltage range of 8-100V. Ideal for automotive applications, it offers a wide temperature range from -40 to 125°C and compact dimensions of 5x4mm in a chip carrier package.
MP6513LGJ
MP6543AGL-Z
BRUSHLESS DC MOTOR CONTROLLER; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1;
MP6500AGF-Z
MP6500AGF-Z by Monolithic Power Systems is a motion control IC with a supply voltage range of 4.5V to 35V. It is a stepper motor controller suitable for automotive applications, operating at temperatures ranging from -40°C to 125°C. The package style is small outline with a heat sink and has a compact size of 9.7mm x 4.4mm x 1.2mm (LxWxH).
MP6540HGU-A
MP6540AGU
MP6540GU
MP6543GL-Z
BRUSHLESS DC MOTOR CONTROLLER; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
MP6543GL
BRUSHLESS DC MOTOR CONTROLLER; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
MP6543AGL
BRUSHLESS DC MOTOR CONTROLLER; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved