Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BRUSHLESS DC MOTOR CONTROLLER; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1;
Median Price
$2.070
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Monolithic Power Systems
1+ parts
$2.840
100+ parts
$2.090
1k+ parts
-
10k+ parts
DigiKey
$1.300
Nova Conductors
$1.560
Vyrian
Ampacity Inc.
$1.100
Continental Prestige Electronics
$1.529
Netroflash
Argo Parts USA
Motion Control ICs MP6543AGL-Z attributes and parameters. Explore more Motion Control ICs devices from Monolithic Power Systems
Other IC type:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Terminal Finish:
MP6543AGL-Z Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
It started with a vision. Michael Hsing, pioneering engineer and CEO, founded Monolithic Power Systems, Inc. in 1997 with the belief that an entire power system could be integrated onto a single chip. Under his leadership, MPS has succeeded not only in developing a monolithic power module that truly integrates an entire power system in a single package, but also it continues to defy industry expectations with its patented groundbreaking technologies. We make power design fun! With our innovative proprietary technology processes, we thrive on re-imagining and re-defining the possibilities of high-performance power solutions in industrial applications, telecom infrastructures, cloud computing, automotive, and consumer applications. We are creative thinkers. We break boundaries. We take technology to new levels. As a leading international semiconductor company, Monolithic Power Systems (MPS) creates cutting-edge solutions to improve the quality of life with green, easy-to-use products.
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
FDLL4148
National Semiconductor
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Itt Semiconductor
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99WT1G
Fairchild Semiconductor
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Surge Components
LV8413GP-E
Onsemi
LV8413GP-E by Onsemi is a Motion Control IC in PLASTIC/EPOXY package with 16 terminals. Operates at -30 to 85 °C, BICMOS tech, and supports 3.3V/5V power supplies. Ideal for motion control applications requiring precise voltage regulation.
DRV8350HRTVR
Texas Instruments
DRV8350HRTVR by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage range of 9-75V, and max output current of 1A. Ideal for automotive applications, it features a temp range of -40 to 125°C and compact chip carrier package with very thin profile.
L6235D
STMicroelectronics
L6235D by STMicroelectronics is a Motion Control IC with 24 terminals, operating voltage range of 8-52V, and max output current of 5.6A. Ideal for automotive applications due to its BCDMOS technology and compact rectangular package design.
DRV10974RUMR
DRV10974RUMR by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 4.4V to 18V, and temperature grade suitable for automotive applications. It features a package style of CHIP CARRIER and is designed for Brushless DC Motor control. With a compact size of 4x4mm and surface mount capability, it offers precise motion control in various electronic systems.
DRV8302DCA
DRV8302DCA by Texas Instruments is a motion control IC with 56 terminals and a supply voltage range of 6-60V. It operates in temperatures from -40 to 125°C, making it suitable for automotive applications. With a max output current of 1.7A, this brushless DC motor controller comes in a small outline package ideal for surface mounting.
TMC246B-PA
Trinamic Motion Control & Kg
TMC246B-PA by Trinamic: 44-terminal IC for stepper motor control. Operates at -40 to 125°C, with 3-5.5V supply voltage range and 7A output current. Ideal for automotive applications due to HVCMOS technology and low profile flatpack design.
A3977SLPTR
Allegro MicroSystems
Allegro MicroSystems' A3977SLPTR is a Motion Control IC with 28 terminals, operating at -20 to 85°C. It supports stepper motor control, offering a max output current of 2.5A at a supply voltage range of 3-5.5V. The small outline package with gull wing terminals and thin profile makes it suitable for various motion control applications requiring precise voltage regulation and thermal management.
TLE7182EMXUMA1
Infineon Technologies
TLE7182EMXUMA1 by Infineon Technologies is a Motion Control IC with 24 terminals, operating at a nominal voltage of 12V. It is designed for brush DC motor control applications, featuring a small outline package style and dual terminal position. The IC has a max supply voltage of 45V and can operate within a range of 5.5V to 45V.
NCV70627DQ001R2G
NCV70627DQ001R2G by Onsemi is a Motion Control IC with 36 terminals, operating at a supply voltage range of 5.5V to 29V. It features a max output current of 0.8A and is designed for stepper motor control applications. The package style is small outline with heat sink, making it suitable for compact designs requiring precise motion control.
IKCM30F60GDXKMA1
IKCM30F60GDXKMA1 by Infineon Technologies is a Motion Control IC with 24 terminals, operating voltage range of 14.5V to 18.5V, and max output current of 60A. Ideal for AC motor control applications in industrial settings due to its temp range of -40°C to 100°C and compact rectangular package design (36mm x 21mm x 5.6mm).
DRV8701PRGER
DRV8701PRGER by Texas Instruments is a Motion Control IC with 24 terminals in a square package. It operates b/w -40 to 125°C, suitable for automotive applications. With a supply voltage range of 5.9-45V and peak current of 9.5mA, it's ideal for stepper motor control systems.
DRV8323RSRGZR
Texas Instruments' DRV8323RSRGZR is a Motion Control IC with 48 terminals, operating at -40 to 125°C. It features a 24V nominal voltage and supports up to 60V. Ideal for automotive applications, this IC is a Brushless DC Motor Controller in a square chip carrier package.
DRV8245SQPWPRQ1
DRV8245SQPWPRQ1 by Texas Instruments is a Motion Control IC with 28 terminals and a supply voltage range of 4.5V to 35V. It features a max output current of 32A, BICMOS technology, and operates in temperatures from -40°C to 125°C. Ideal for half-bridge brush DC motor control applications due to its compact size and high performance capabilities.
DRV8872DDA
DRV8872DDA by Texas Instruments is a Motion Control IC with 8 terminals, operating voltage range of 6.5V to 12V, and max output current of 3.6A. It is designed for brush DC motor control applications in automotive environments due to its low profile package style and dual terminal position.
VNH3SP30-E
VNH3SP30-E by STMicroelectronics is a Motion Control IC with 30 terminals, operating at 9-36 V. It features a max output current of 30 A and supports brush DC motor control applications. The package style is small outline with gull wing terminals, making it suitable for surface mount designs in various electronic systems.
A3950SLPTR-T
Allegro MicroSystems' A3950SLPTR-T is a Motion Control IC with 1 function, suitable for Brushless DC Motor Controllers. It operates at -20 to 85°C, supports a max output current of 2.8A, and has a nominal voltage range of 8-36V. Ideal for applications requiring precise motion control in compact spaces.
DRV8703QRHBTQ1
DRV8703QRHBTQ1 by Texas Instruments is a Motion Control IC with 32 terminals, operating voltage range of 5.5V to 45V, and temperature grade suitable for automotive applications. It features a max operating temperature of 125°C, package style in chip carrier with very thin profile, and terminal finish in Nickel/Palladium/Gold. Ideal for stepper motor control systems requiring precise motion control in harsh environments.
E-L6219R013TR
E-L6219R013TR by STMicroelectronics is a motion control IC with a supply voltage range of 4.75V to 5.25V and a max output current of 1A. It is a bipolar stepper motor controller, suitable for applications requiring precise motion control in compact designs.
L6208D013TR
STMicroelectronics L6208D013TR is a Motion Control IC with 48V supply voltage, 5.6A output current, and BCDMOS technology. Ideal for automotive applications due to its small outline package style, dual terminal position, and wide operating temperature range from -40°C to 150°C.
DRV8803PWP
DRV8803PWP by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 8.2V to 24V, and max output current of 0.02A. It is a Stepper Motor Controller suitable for industrial applications due to its compact size, dual terminal position, and high temperature tolerance up to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MP6540HGU-A-Z
BRUSHLESS DC MOTOR CONTROLLER;
MP6540HGU-Z
MP6540HGU
MP6513GJ-Z
MP6513GJ-Z by Monolithic Power Systems is a Motion Control IC with 6 terminals, operating voltage range of 2.5V to 21V, and temperature range from -40°C to 125°C. It is designed for stepper motor control applications in automotive systems due to its small outline package and surface-mount capability.
MP6550GG-Z
BRUSH DC MOTOR CONTROLLER;
MP6540AGU-Z
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 26; Package Code: VQCCN; Package Shape: SQUARE; Surface Mount: YES;
MP6540GU-Z
MP6513LGJ-Z
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MP6534GU-Z
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
MP6534GU-Z-CUT
MP6507GQ-Z
STEPPER MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
MP6538GV-Z
MP6538GV-Z by Monolithic Power Systems is a Motion Control IC with 28 terminals, operating voltage range of 8-100V. Ideal for automotive applications, it offers a wide temperature range from -40 to 125°C and compact dimensions of 5x4mm in a chip carrier package.
MP6513LGJ
MP6500AGF-Z
MP6500AGF-Z by Monolithic Power Systems is a motion control IC with a supply voltage range of 4.5V to 35V. It is a stepper motor controller suitable for automotive applications, operating at temperatures ranging from -40°C to 125°C. The package style is small outline with a heat sink and has a compact size of 9.7mm x 4.4mm x 1.2mm (LxWxH).
MP6540HGU-A
MP6543GL-Z
BRUSHLESS DC MOTOR CONTROLLER; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
MP6543GL
BRUSHLESS DC MOTOR CONTROLLER; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
MP6543BGL-Z
BRUSHLESS DC MOTOR CONTROLLER; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
MP6543AGL
BRUSHLESS DC MOTOR CONTROLLER; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
MP6543BGL
BRUSHLESS DC MOTOR CONTROLLER; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved