Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BRUSHLESS DC MOTOR CONTROLLER;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Ampacity Inc.
$5.500
AZTECH Wire
$13.656
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Authorized Procurement Solutions
Motion Control ICs MP6534GU-Z-CUT attributes and parameters. Explore more Motion Control ICs devices from Monolithic Power Systems
Other IC type:
MP6534GU-Z-CUT Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
It started with a vision. Michael Hsing, pioneering engineer and CEO, founded Monolithic Power Systems, Inc. in 1997 with the belief that an entire power system could be integrated onto a single chip. Under his leadership, MPS has succeeded not only in developing a monolithic power module that truly integrates an entire power system in a single package, but also it continues to defy industry expectations with its patented groundbreaking technologies. We make power design fun! With our innovative proprietary technology processes, we thrive on re-imagining and re-defining the possibilities of high-performance power solutions in industrial applications, telecom infrastructures, cloud computing, automotive, and consumer applications. We are creative thinkers. We break boundaries. We take technology to new levels. As a leading international semiconductor company, Monolithic Power Systems (MPS) creates cutting-edge solutions to improve the quality of life with green, easy-to-use products.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NE555D
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Telefunken
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TMC2209-LA
Trinamic Motion Control & Kg
TMC2209-LA by Trinamic Motion Control is a motion control IC with a square package shape and 28 terminals. It operates at a nominal voltage of 24V and can handle a max output current of 3A. This IC is commonly used as a stepper motor controller in automotive applications.
MC33035PG
MC33035PG by Onsemi is a 24-terminal motion control IC with a supply voltage range of 10-30V. It operates in industrial temperatures (-40 to 85°C) and controls brushless DC motors with a max output current of 0.1A. The rectangular plastic/epoxy package has dimensions of 31.69mm x 7.62mm x 4.44mm, making it suitable for various motor control applications.
DRV3245BQPHPRQ1
Texas Instruments
DRV3245BQPHPRQ1 by Texas Instruments is a Motion Control IC with 48 terminals in a square package. It operates b/w -40 to 125°C, suitable for automotive applications. With a max output current of 1A and support for brushless DC motors, it offers precise control in compact designs.
HIP4020IBZT
Renesas Electronics
Renesas Electronics' HIP4020IBZT is a motion control IC with 20 terminals, operating voltage range of 2.5V to 15V, and output current up to 0.5A. Ideal for stepper motor control applications, it features a small outline package with dimensions of 12.8mm x 7.5mm x 2.65mm and can operate in temperatures ranging from -40°C to 85°C.
FNB41060B2
FNB41060B2 by Onsemi is a Motion Control IC with 26 terminals, operating voltage range of 13.5V to 16.5V, and max output current of 15A. This AC MOTOR CONTROLLER has a rectangular package style with dimensions of 39mm x 23mm x 7.5mm, making it suitable for various motion control applications requiring precise voltage regulation and high current handling capabilities.
PS21767
Mitsubishi Electric
PS21767 by Mitsubishi Electric is a Motion Control IC with 29 terminals, operating voltage range of 13-16.5V. It offers a max output current of 60A and is designed as an AC motor controller in flange mount package for industrial automation applications.
STGIB15CH60TS-LZ
STMicroelectronics
AC MOTOR CONTROLLER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
LV8760T-TLM-E
LV8760T-TLM-E by Onsemi is a Motion Control IC with 20 terminals, operating voltage of 5V, and max output current of 4A. Ideal for brush DC motor control applications due to its BICMOS technology, small outline package style, and dual terminal position.
A3977KEDTR-T
Allegro MicroSystems
Allegro MicroSystems' A3977KEDTR-T is a Motion Control IC with 44 terminals, operating voltage of 3-5.5V, and max output current of 2.5A. Ideal for automotive applications, this NMOS technology-based chip carrier package offers precise stepper motor control at temperatures ranging from -40 to 125°C.
FSBB15CH60F
FSBB15CH60F by Onsemi is a 27-terminal AC motor controller with a nominal voltage of 15V. It offers a max output current of 15A and operates within a supply voltage range of 13.5V to 16.5V. This motion control IC in MICROELECTRONIC ASSEMBLY package shape is ideal for applications requiring precise speed and torque control in hybrid technology setups.
DRV2605LTDGSRQ1
Texas Instruments' DRV2605LTDGSRQ1 is a Motion Control IC with 10 terminals, operating from -40 to 105°C. It supports supply voltages from 2V to 5.2V and outputs up to 5.5V for industrial applications like brush DC motor control in automotive systems.
FSBB20CH60F
AC MOTOR CONTROLLER; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE; No. of Functions: 1;
DRV8870DDA
Texas Instruments DRV8870DDA is a Motion Control IC with 8 terminals, operating voltage range of 6.5-45V, and max output current of 3.6A. Ideal for automotive applications due to its small outline package and wide temperature range (-40 to 125°C).
MC33HB2001EK
MC33HB2001EK by NXP Semiconductors is a Motion Control IC with 32 terminals, operating voltage range of 5-28V, and max output current of 16A. Ideal for automotive applications due to AEC-Q100 screening, MOS technology, and compact design.
L297D
STMicroelectronics L297D is a Motion Control IC with 20 terminals, operating at 5V. It is a Stepper Motor Controller in a small outline package, suitable for applications requiring precise motion control. With bipolar technology and Gull Wing terminals, it offers reliable performance at supply voltages ranging from 4.75V to 7V.
FSB50550BSL
FSB50550BSL by Onsemi is a Motion Control IC with 23 terminals, operating voltage range of 13.5V to 16.5V, and max output current of 7A. This BRUSHLESS DC MOTOR CONTROLLER is designed for automotive applications, featuring a temperature range from -40°C to 125°C and hybrid technology for efficient performance.
DRV8825PWPR
DRV8825PWPR by Texas Instruments is a Motion Control IC with 2.5A output current and 24V nominal voltage. Ideal for brush DC motor control, it operates in industrial temperature range (-40 to 85°C) and supports surface mount installation.
FSBB15CH60C
FSBB15CH60C by Onsemi is a Motion Control IC with 27 terminals and a supply voltage range of 13.5V to 16.5V. It features a max output current of 15A, making it suitable for AC motor control applications. This hybrid technology IC comes in a rectangular package style with matte tin terminal finish for enhanced performance.
DRV8834RGER
DRV8834RGER by Texas Instruments is a Motion Control IC with 2.2A max output current, operating at -40 to 85°C. Suitable for brush DC motor control applications, it features a package style of CHIP CARRIER and very thin profile, with terminal finish of Ni/Pd/Au.
DRV8803PWPR
DRV8803PWPR by Texas Instruments is a motion control IC with a nominal voltage of 24V, suitable for industrial applications. It features a max output current of 0.02A and can operate in temperatures ranging from -40 to 85°C. With a compact rectangular package style and surface-mount capability, it offers precise control for stepper motor systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MP6540HGU-A-Z
Monolithic Power Systems
MP6540HGU-Z
MP6540HGU
MP6513GJ-Z
MP6513GJ-Z by Monolithic Power Systems is a Motion Control IC with 6 terminals, operating voltage range of 2.5V to 21V, and temperature range from -40°C to 125°C. It is designed for stepper motor control applications in automotive systems due to its small outline package and surface-mount capability.
MP6550GG-Z
BRUSH DC MOTOR CONTROLLER;
MP6540AGU-Z
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 26; Package Code: VQCCN; Package Shape: SQUARE; Surface Mount: YES;
MP6540GU-Z
MP6513LGJ-Z
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MP6534GU-Z
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
MP6507GQ-Z
STEPPER MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
MP6538GV-Z
MP6538GV-Z by Monolithic Power Systems is a Motion Control IC with 28 terminals, operating voltage range of 8-100V. Ideal for automotive applications, it offers a wide temperature range from -40 to 125°C and compact dimensions of 5x4mm in a chip carrier package.
MP6513LGJ
MP6543AGL-Z
BRUSHLESS DC MOTOR CONTROLLER; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1;
MP6500AGF-Z
MP6500AGF-Z by Monolithic Power Systems is a motion control IC with a supply voltage range of 4.5V to 35V. It is a stepper motor controller suitable for automotive applications, operating at temperatures ranging from -40°C to 125°C. The package style is small outline with a heat sink and has a compact size of 9.7mm x 4.4mm x 1.2mm (LxWxH).
MP6540HGU-A
MP6530GF-Z
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 28; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MP6530GR-Z
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
MP6534GU
MP6539BGF-Z
MP6539BGV
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved